Sure Shot A1000R 1 Quart Enameled Steel Sprayer, Red

Bought one of these a year ago as a way to replace the many half empty cans of carb cleaner in my garage. Very impressed at how this performs when filled with Naptha and used as a carb/brake cleaner. Just about paid for itself in a couple months with money saved buying solvent in bulk instead of by the can. Would recommend removing brass diffuser from nozzle for more direct spray pattern. Built tough, has survived many 6 ft drops and still holds air over weeks of storage. So impressed with it I bought one for my grandpa and dad!

Brake parts cleaner is a must in any auto garage. Buying it in a five gallon can is much cheaper per ounce, and you won't have cans everywhere and filling your trash/recycle bin. Using a cheap siphon bulb between the can and the sprayer makes filling easier. While you can't see inside the can very well to see how much you filled, you don't have to be exact. Just leave at least a 1/3 of the can for air. My advice would be to buy the adjustable spray nozzle they have to get just the right pattern you want. The one it comes with sprays too fine a mist. Taking the pin out of the center results in a powerful stream, but the adjustable nozzle lets you quickly get just the right amount of force and coverage. I'm using way less solvent to clean new brake rotors, and the can stays pressurized until you need it. I generally pump mine up to a little over 50 psi and it works great. I also bought the filling cap with the bars to make it easier to remove without a wrench, and the 6" extension pipe so I can get the nozzle closer in tight spaces. Very sturdy, well-made, and doesn't tip over. Not cheap, but you are truly getting what you pay for here, and made in the USA.

I use it for my own blend of penetrating oil. I recommend getting the extension hose to make it easier to spray those harder to reach nuts and bolts. We'll made. Holds pressure for at least a couple months in between fills.

Works great for cleaning solvents. Took the tip insert out, comes out in a nice stream, just wish it was a little more coarse stream.

I don't know for sure how much air they charge this with from the factory but it was pretty cool just squeezing the trigger right out of the box and hearing it blow the air out of it. I got it for brake cleaner and it won't be here til Tuesday. (this is Sunday) Can't wait to use it to clean stuff up with,. Very solid feeling unit. Seems to. be very well built. Very happy so far without even using it!!

Why buy any other brand? Never had issues! Do have to make hole in nozzle when first get it! The hole from factory is just o small for my liking! It is a canon now! Great quality!

This container is so handy! I have saved so much money on brake cleaner since I’ve owned it. It always sprays well and is easy to fill. Bought a gallon of brake cleaner and have only filled it twice while using it constantly on my projects for about 6 months. Definitely better than buying spray cans. Highly recommended!

This sprayer is still made the same as the one my grandfather used in the sixties and the same as the one my dad bought back in the seventies which got run over a few weeks ago by a dozer. It wasn't damaged bad enough it couldn't be fixed but it would have required welding a complete bottom back in it. This ones price was way less then the time it would take to make the old one work and it would still be an old one. As long as you don't use a water base liquid in these they last 30 or 40 years. Plus to can purchase different nozzle's or spray tip for different purposes. We use it for spraying PB Blaster. We buy that stuff in bulk but if you drop a spray can of Blaster it will 99% of the time land on it's spray nozzle and the can may be full but it's ruined. We relieve the pressure in the can and pop a hole in the bottom and poor it into this Sure Shot sprayer. Works perfect and on top of everything else, it is 100% made in USA.