🌀 Transform Your Wash Cycle with Ease!
The PartsBroz 389140 WP389140 Washer Drive Block is a high-quality, durable replacement part designed to restore optimal performance to Whirlpool, Kenmore, KitchenAid, and Roper washers. With its precise fit for the WTW4816FW2 model, this drive block addresses common issues like agitation and spinning, ensuring your laundry routine runs smoothly.
| Brand | PartsBroz |
| Color | Silver |
| Material | Metal |
| Style | Above Ground |
| Product Dimensions | 1.3"L x 2.3"W x 3.3"H |
| Power Source | Corded Electric |
| Item Weight | 0.26 Pounds |
| Manufacturer | PartsBroz |
| UPC | 723707487515 |
| Brand Name | PartsBroz |
| Model Info | 389140 |
| Item Weight | 4.2 ounces |
| Country of Origin | China |
| Item model number | 389140 |
| Part Number | 389140 |
| Material Type | Metal |
| Included Components | 389140 Drive Block Kit |
| Batteries Included? | No |
| Batteries Required? | No |
E**N
Perfect fit for a Kenmore 80 series washer
Excellently made part. Fits on the spindle TIGHT which is what you want. Take care to line the tabs up as best you can before driving this down the spindle so you don't have to beat on it to twist it one way or the other. A pro tip for installation...get the new one started ever so slightly square on the spindle and then use the old drive block to hit on with your hammer. Just set it on top of the new one and hit it instead of the new block. You can get it 95% of the way down the spindle this way and then I just got a piece of 2x4 to hit on to get it the rest of the way. 13 dollar part saved me from having to buy a new washer.
S**S
Perfect fit for my Kenmore Elite 90
Worked as intended!
B**B
Ordered 2
Perfect fit in Whirlpool Top Load Washer
M**T
Fit, compared to original
Super easy to replace, once you get past your fear of smacking the very large "washer/nut", that is located immediately above this drive block. I used a 3-4" long dowel, with a hammer, to pound counter clock-wise, on the very large nut Because I did not buy a replacement "nut", I made every effort to pound on the original, without destroying it. There were definitely times that I wanted to use power tools and decimate it! If you find a kit that contains the big washer and the drive block, feel free to beat the crap out of that big washer nut, to remove it. Otherwise, all went well. Once I removed the drive block, the whole metal tub, came up and out. One notable thing, the original drive block was only slightly worn (after two years), but did not look bad, or too worn to continue working. Since I only paid $12 to get a new one, I replaced it anyway. All and all, this was an easy fix, once you look up how to do it.
B**S
perfect
exact fit for my 25 yr old Kenmore 90 washing machine. also replaced the tub and this made it a breeze. This thing is built like a tank, not like the junk you see today. As long as I can keep finding parts I'll keep fixing it!
A**Z
No issues
Went in with ease. After a couple months of use at 6 loads a week? I can tell you it is working exactly as it should. No issues. Satisfied with the quality.
H**Y
Fits perfectly
I used hammer to get fit all the way, it's pretty tight, and it should be
F**E
Nice part, but did not fit without some work
I received this part quickly and was waiting on this to fix my machine from banging around after the spin cycle. I also replaced my drive tube and this WOULD ABSOLUTELY not slide down onto it. I ended up using a dremel yo sand the inside several times, pound it onto the old drive tube and then heated it up to expand. I was then able to ease it on and off onto the new drive tube and finally able got it to seat, while still being able to remove it if I needed future repairs. I would have asked for a new one, but it's been over a week without a washing machine because I also replaced my rusty inner tub and outer tub seal. Did 2 loads already and it's nice and tight.
Trustpilot
3 days ago
1 month ago