GM Genuine Parts 15-11105 (25193922) Engine Coolant Water Outlet

Got the customer back on the road!

After replacing a couple of hoses with no success I decided to replace this part. Installation done, leak gone. Pull up a you tube video to watch for installation tips.

I purchased this to replace a third Dorman version of the same part. All the Dorman versions failed the same way, by disintegrating at the arched tube. The OEM that came with the car lasted seven years and only failed by cracking at the seam allowing me to at least make it home, so I expect similar longevity from this part. The Dormans all only lasted two years max! This part is genuine, high quality and worth the few extra dollars and extra shipping wait vs the knockoffs.

Outstanding! Great price on this part that worked perfectly. I was able to remove all the hoses using a small channel-lock pliers but it was not fun. I definitely agree that you should get the hose clamp pliers. My old part cracked right at the joint where the large radiator hose nub meets the unit. A weep turned to a leak. This was a fairly easy switch. I did take the air intake hose loose so I could see the heater hose that goes on the rear. I also replaced two of the clamps that were nearly impossible to get back on without the right pliers. I went to a normal stainless clamp as they are much easier to install. Don't forget to get some new antifreeze as well. You will waste half a gallon or more. I should have drained the radiator down half way before I started. Anyway, great part at great price and it was here in 2 days with free prime shipping. Happy customer.

I thought I had a cracked engine coolant water outlet. It turns out I had a coolant hose that didn't seal right. Also I broke the engine coolant recovery tank hose figuring this out. It was still a worthwhile purchase as I needed the adapter that came with the water outlet in order for the Hose to fit. Thank you. The quality is high and it was very useful. Spare parts are always an asset. 5 stars.

Purchased for my wife car. Arrived and installed with no issues.

bought the cheaper skp water housing from the rock and it leaked from the start. This gm one was good no leaks. The parts looked the same. Removed the gasket and applied some o-lube (both times) and torqued to spec. 6mths and a few k miles still good no leaks. Now the cheap oil cooler gaskets are another story...

On the original part on my engine, the pipe that the large hose connects to had developed a hair line crack along the seem of the where the two halves of the mold come together to make the part. Under heat and pressure coolant would fizz and bubble out of this almost invisible crack. I bought this part and the ABN Flexible Hose Clamp Pliers from Amazon as well. Those hose pliers or ones like them were critical in getting into tight spaces to get the hose clamps off and thus the hoses so I could swap out the part with this new coolant water outlet. After swapping out the part I washed down the engine with a hose (make sure your engine is not too hot or you run the risk of cracking it) to wash away all the coolant so it no longer smelled and so I could determine after the next couple of days whether I had any other leaks and I did not. The hose outlet pointing straight up comes with a connector that goes into the hose that goes to the coolant overflow tank, I left the old one on because it seemed find and did not want to run the chance of running the hose as it seemed to be on the connector pretty good. I just saved the new connector in case I might need it in the future.

Es original y nuevo tal cual esta ofertado.

Original OEM Replacement for a 2014 Chevy Cruze. Perfect fit and about 1 hour to change and add new coolant.

Toma de agua (carcasa de termostato) se ajusta correctamente a mi vehiculo, llego a tiempo viene con empaque y sus tornillos no es necesario utilizar cilicon, hay que utilizar un torquimetro.

The source of the coolant loss in the 2015 1.4 LT was not obvious at first. Initially I thought the water pump was at fault since I had already repaired this twice. The leak turned out to be from a split along the upper seam in the large assembly tube (tube shown in the attached picture), and moving the hose exposed the split. The specs are confusing, the part is purported to be ACDelco, however Germany was listed as the Country of Origin on the product overview and China as the Country of Origin in the Technical Details. None the less, the part fits perfectly, installs easily and comes with an embedded rubber gasket, new sensor and attached bolts....everything you need. Check out YouTube for an installation video. Allow one hour for installation. So far, no leaks and all sensors are working. I will provide an update should things change Rick

parts stores in my town of Port alberni wanted 400 for this part, glad i found the same part here for 60 bux!! worked fine...