Logysis Computer 92mm Hydro Bearing Ice Edge 400 XT CPU Cooler MC4004IEXT

First off, I don't know if this product is still available for vendors to stock. It's not easy to find it even at retailers that carry this brand.That aside, it's a very nice looking, easy to install little cooler.I bought it for it being sort of darkish nickel plated finish and also for the fact that it comes with 4 pipes and a copper finished contact plate.I bought a separate 92mm PWM fan from Cooler Master just in case I needed to replace the one it comes with for it being too loud or poor air flow. I was wrong!. This unit comes with a high quality 92mm fan that is mounted on a rubberized black frame which is surprisingly silent. Now, I can't say much about the durability of the fan but being it Hydro-Bearing type, I guess it will outrun many components on my setup. The good side of having another fan is that I can install it to the cooler with the supplied extra brackets, or simply have it for spare.It works well on mild OC CPU's but of course, will not perform at extremes.Be aware of the fan's clearance. You will probably be in troubles to install memory modules with heat sinks that are too close to the CPU.I definitely recommend this product for those that still want a 'tower' cooler in compact setups.

Works good

Nice cooler. Bottom of this cooler is one piece copper alloy that 4 heat tubes lead into. This distributes and pulls heat from the processor quicker, as others have the tubes contacting the CPU with spaces of a mounting plate in between.Had a problem with one of my Intel core 2 quad systems, could not disapate the heat. This cured the problem. Run coolers with the fan on the exit side pulling air thru it. This seems to work better and creates a tunnel to the rear case fan.Been assembled a few hours ago, temps show 26C for the CPU and 22C for the motherboard. Fan Speed 750 RPM. I expect lower once the paste cures.Arrived on time, packaged very well. Instructions give you the basic idea, not real clear, ditto. I fitted it up before final install.Did not use the paste supplied, AS 5 is all I use.My Ride:Intel DX48BT boardIntel Q9550 CPU (oc'ed to 3.2GHz.)4x2GB Patriot 1333MHz memoryCrucial M4 hard drive.LG optical drive.HIS 5450 graphicsSeasonic 750W PSUNZXT Source 220 case.Would like to try one of these coolers on a LGA 1366 i7 system next.

The 92MM fan kept this cooler to a size that will fit most any case. The fan is much quieter that the original AMD stock fan that came with the CPU. The AMD mount is a hook and lock design, I didn't use the Intel mount so I can't comment on it, but the Intel mount will allow for vertical or horizontal fan positioning. After my wife got her game running for a while, the CPU was 15 degrees Celsius cooler that with the stock fan. The stock cooler ran to 65 C. this one kept the temps under 50 C.

Built a new computer. i7-4770 on a microATX motherboard in a microATX tower. I wanted a cooler that could fit in the smaller space available in the case I chose. This cooler fit nicely. Because things are more cramped on the microATX motherboard, the fan itself (not the fins) conflicted with the heat spreaders on my RAM. But it was easy to reposition the fan to pull air through rather than push air through the fins. Running a load on the CPU confirms that the cooler is effective at dissipating heat from the CPU. I would buy this product again.

One of the few that easily attaches to a Dell motherboard using AMD chip but Intel configured fan attachment. If you are upgrading a Inspiron from Athlon to Phenom, this is the one you want. It fits the dell case and the oddball motherboard and keeps a quad core cool.

Logysis 92 mm Hydro bearing Ice edge 400 XT CPU cooler is just great. Very easy to install and not as loud as most fan coolers.

Great fan, just about silent. If you're concerned about noise, this is the fan to get, you won't hear a thing!