MFM Peel & Seal Self Stick Roll Roofing (1, 36in. Gray)

I have a flat roof and the roofer did a poor job on the edge and over time the edges of the roof lost their seal resulting in leaks . I investigated numerous fixes and this self adhesive roofing seemed like the solution . I had a roofer clean the roof edge and apply this material over the edge adhering it onto the flashing and bonding 5 1/2 " onto the flat roof . It has been on for 5 years looks like new and the most important is it still adheres firmly to the roof and edge flashing . Multi year problem solved. Great product .

Laid down easily, following a straight chalk line. Seems to be doing a good job on a flat, sloping roof.Should overlap 3/4" to 1", over the previous row.

If you have an RV, a mobile home, or metal roof and it leaks. Slap this over it, and be done with it! Yes it's a bit pricey, but by the time you spend money on all those products that don't fix your leak, you could have just gone with this stuff and been successful at stopping your leak. On an RV, I'd just do the entire roof with it. It will last longer than the thin rubber roof that comes on them factory! I used it on my 60x40 mobile home. Tree limbs had fallen and compromised the roof in several places when I bought it. I put this stuff down and all the leaks are sealed, and the light bill went down a bit! I highly recommend it!

Great product

For the price of this, you'd think they could afford to include a sheet of basic instructions for how to prep the roof before applications. That was worth 2 stars off for me. Seems pretty thick and I'm excited to try it on a Camper, but instructions, people, print some! I have to go google info and guess, and hope I'm doing it right, instead. Wish me luck with that.

Peel and Stick is a fantastic product to seal leaks in metal roofing, I used some about 5 years ago, and it’s still doing its job, I got it from a handyman…. Easy to cut to the shape you need, and easy to apply, very durable…glad to see Amazon carrying this product!

I've used this product several times on buildings that I own with flat roofs. It is expensive but is also high in quality, so you get what you pay for.I have always had to install it by myself which is quite challenging. Having one or two helpers would make a huge difference, but here is what I learned during my solo installs.....1. Get the roof surface as clean as possible (a leaf blower works great), and when applying over existing rolled roofing always use a roofing primer to clean and prepare the surface before adhering. This primer is very expensive but it's worth it.2. It is very hard to keep the roll going in a straight line by yourself. On longer runs I've had to cut it into sections of 8-10 feet to be manageable. With a helper you could probably do a full 33-foot run.3. Try to install on a warm day but not when it is super hot out and also not too windy. The adhesive is VERY STRONG (which is good), but if the roll folds and adheres to itself it is very tough to pull it back apart.4. Unroll and peel small sections at a time and use a roller to avoid getting air bubbles beneath the surface. Any bubbles are very tough to get out once they form. Make sure the edges and seams where pieces overlap are given extra attention with the roller. Having a helper pull on the roll to keep it tight would be a huge help. Once this stuff is stuck down and rolled you can't pull it back up to remove air bubbles even if you want to.

Loved it. Looks and worked great. So easy to install. My 16 yr old son applied it.