Braided Sleeving, 0.500" In., 10 Ft., Black

Much tidier and cleaner looking than letting the cords just do what they may, and also better than the velcro cord wrap method I had used to bundle the cords as a unit, which was still a bit of an eyesore. I looked around at the neoprene sleeves, and while they were probably easier to wrap around the cords, the photos I saw looked like they ended up bulging unattractively. In contrast, these TechFlex sleeves are a bit of a challenge to open and push the cords inside and then neatly close the sleeve around them, a real bear actually considering I only had 2 or three cords each, but once I finally got them inside the result was the cleanest possible, smooth-line single cable. I wouldn't use anything else.I've included photos of one of my areas of 'un-managed' cords, then my former velcro management method, and finally the beautiful TechFlex wrapped cords. Once the wrapping is finished, the now thicker single "cable" is still somewhat flexible and can be more easily pushed and positioned behind or somewhere less obtrusive.

We just got a kitten, so I wanted to make sure the cords were protected and out of the way so that she wouldn't want to play/chew on them. These work absolutely wonderfully. It was super easy to put on. I was a little worried that they might be too small - I have so many cords going to my PC (dual monitors and their power cables, keyboard, mouse, ethernet). I had to leave the power cables out of the tie and only put in the rest and they fit easily. The power cables didn't really need to be in it anyway so it worked out fine. And anything that was too long and sticking out of the cable more than the others I just wound and tied with zip ties.I think the best part is how cables can "exit" the wrap at any time. It's great for my mouse and keyboard cables that needed to go a different way than the monitors'. It was also really easy to cut with scissors.Overall I really liked this. It was enough cable to do both mine and my husband's PCs with a few feet to spare.

Easy to use and provides wire protection and organizing. No heat shrinking needed, this material has full length split down the side that opens to insert wiring and closes back on its own, this keeps wiring enclosed and doesn’t come out. Diameter is the inside diameter, material looks a little shining but not glosses like others I seen.

I just purchased this item so I can’t give an accurate review about the long term performance and durability. It does look like a quality product and should perform as well as the TechFlex F6 split braided loom of different sizes that was included with the 3-piece package I purchased.HOWEVER, as can be seen in the included photos, the 1/2” split loom was tightly folded for shipping which left permanent sharp bends in it. I’ve tried many different ways including heat to remove the creases but nothing has helped. The other 10’ lengths of braided loom included with my order were rolled up for shipping and received in perfect condition. The sharp creases in the 1/2” loom shouldn’t be as noticeable after they are filled with automotive wiring.

Needed a good looking wrap for the clunky looking wrinkled flat cable running from the headliner in my Mustang to the auto dimming mirror. This braided slip-on material worked perfectly. Cuts easily to length with scissors (sealed the cut ends with a low flame). Snaps on easily and stays in place but can be quite easily removed. Retains its cylindrical shape. Very flexible and will bend to the existing cable curve nicely. Looks good. I will also be using this at some under hood and trunk locations for dressing up the wiring and providing additional abrasion protection. Plus I see possible applications above and beneath my computer desk and around my TV and sound system. Will be considering more of this product in different diameters for other applications. The TechFlex website offers excellent info on how this and related products can be used. Worth checking out.

I decided to give this a shot to wrap the electric wires on my motorcycle handlebars, which consisted of hand control wires (turn signal buttons, start button, engine run switch, horn, and high/low lights) and the wires which power the front turn signals. This wrap worked great! It took a little bit to tighten up as tight as I wanted which was far tighter than I would do for my TV, gaming console, cable box etc because I wanted it to looked extremely uniform and snug. Instead of a lot of zip ties like I had it rigged before to hold these wires together, it now only has two zip ties on each side. Not only less zip ties, but 1,000,000 times better! Thanks TechFlex for making my bike look even better

So easy to use and it looks great! I forgot to take a ‘before’ photo but it wasn’t pretty. There were all different sizes and colors or cords and cables everywhere for my surge protector, router, phone and Ooma box. I also went to Walmart and got a gray plastic basket to put the surge protector and router in. Everything looks neat and tidy now. Product was easy to cut to just the size you need and was easy to tuck the cords inside. Even had plenty left over! I would definitely buy again and recommend.

This product is great for wrapping your computer wiring or anything else you need. The only negative i would say is that the computer wires are a bit heavier and I had a hard time putting the actual cable, wires, etc inside the wrap. It does take some wrangling and they do pull out easy. I had to zip tie mine in a couple of places for them to stay inside the wrap. That all said, it does make your cables much nicer and neater instead of being all over the place.Get the 3/4 inch for that. This was my first time using the product so i ordered a bit small.