DIY Full Set Buttons for Nintendo Switch & Switch OLED, Custom Replacement Buttons for JoyCon, ABXY Direction Keys SR SL L R ZR ZL + - Home Capture Trigger Buttons Springs - Black

I got these for my cherry blossom OLED shell, and such a pretty combination. There are plenty of tutorials on YouTube on how to swap the shells, so that made it super easy! ExtremeRate is my favorite aftermarket switch part company

Took several hours but I found it to be quite fun once I got the hang of it. Buttons fit perfectly and I didn’t have to shave them or cut them any special way I just twisted and pulled. I HIGHLY recommend practicing with an old joycon first before taking apart the ones you want to replace because the kit does not include the tool you need to pry the battery out with and you have to use your fingers which caused me to pull the battery out the wrong way and short circuit it (good thing it was an old joycon). Overall, the buttons are great, everything works and clicks fine, just be careful and patient.

All buttons are perfect replacement for OEM buttons. They are all keyed correctly for proper fitment. Works great!

Looks exactly like the pictures. Not hard at all to install, especially with the provided video. Nintendo has designed it so that it's pretty much impossible to put buttons in the wrong place anyway. Just remember which screw goes where. I've had the white buttons on the Dark Green set for about a year, and they haven't stained yellow or anything. There is a little shine as the matte finish has worn off, but its still nice and white. I don't have sweaty palms or anything though, nor does it go through particularly heavy daily use. Importantly, take care not to strip the default screws on the outside shell of the joycons. Nintendo's screws are terrible and very easy to strip. I replaced the buttons the first time and one screw essentially cannot be taken out anymore. I'd HIGHLY recommend changing the default outer screws to the ones provided in the little bag that comes with the buttons. Those are much better. The interior screws do not have this issue.

Let me start by saying that while this set isn't perfect, it's darn close and is a cheap way to make your switch look awesome. Below I will list the he positives and negatives and areas I think they could improve this product. I will also attach pictures for reference. Positives: 1. Button Quality - From what I can tell, the buttons are perfectly molded to fit and mimic the stock buttons perfectly. Use a nail file to trim any pieces of plastic that may protrude after removing the piece from the mold. 2. Appearance - These look great! The color I chose looks exactly as I expected. After showing a friend, he was really impressed and thought it looked really good. 3. Price - Great price and an affordable way to customize your switch. Cheaper and easier than a shell exchange. Negatives / Potential Improvements: 1. Not All Buttons Included - The set comes with most buttons, but is missing the plus, minus, screenshot, and home buttons. While I could forgive excluding the home and screenshot buttons, I was very disappointed not to get plus and minus buttons. It would be great for the joycon to have a completely unison look. 2. No Button Outlines - While the buttons do have the lettering to indicate what button it is, the lettering is the same color as the button, so it makes it very hard to see. While this isn't an issue for us passionate Switch users, it could make things a little confusing if I'm playing with non-switch owner friends and I say "hurry, press (button name)" and they look down at the controller to see where the button is and have to squint to find it. In future revisions, it would be awesome to see maybe the main buttons still have the lettering outlined. 3. Concerns About Paint Rubbing Off - These buttons have a more matte feel than the stock buttons which can feel a little slick at times. This can be a good or bad thing depending on your personal preferencea, but it doesn't bother me. However, I am concerned that due to this lack of clear coat on the buttons, that the paint may begin to rub off over time with extended use. Of course I just received these, so it's not an issue yet, but I could see the issue arising in the future. 4. Lacking Tool Set - While they do include the srewdrivers that you will need, if you are going to do this button replacement, I recommend having some prying tools and a good pair of tweasers handy. It would have been nice to have these included, but fortunately, I had some laying around and it made the installation so much easier. Conclusion: Despite some minor imperfections, this is still an awesome upgrade for your switch. If the seller decided to embrace one or more of the above suggestions in the future, I think this would be one hell of an amazing product.

eXtremeRate's Button replacement kits are amazingly high quality, have the exact same 'soft touch' texture/paint as their shell replacements, and simply slot right into place just like they were OEM Nintendo supplied parts. The one negative I can think of is that the buttons are entirely one color, meaning the ABXY button letters won't be a contrasting color, but I personally think that it's a more symmetrical, unified look. I suggest getting the buttons and at least the joy con shells of you plan on swapping everything, it's much, much easier to do everything in one go, as disassembling the joy con can be a headache. But you get an entire set of Switch screws, so when you put everything back together, you can throw those awful Y-bit Nintendo security screws away and only need a Phillips driver for any disassembling done the road. tl;dr version: 10/10, would reccomend, get shell kit too and replace everything at once, better feeling quality than original parts, wish I'd changed to these sooner.

This was my first attempt at a shell replacement for the switch joycons and the installation was easy/moderately difficult for me. I started the installation using a random video on YouTube, until I remembered that this shop has a YouTube video with installation videos, and once I started watching their video the process became 100x easier. I’m very satisfied with the quality of the product, and I love the way it turned out. I also purchased the mint & heavenly blue button packs to go for a monochrome look for these joycons and so far, I’m in love! I can’t say much on durability as of right now, as I’ve only been using them for a few days now. Quality out of the packaging is incredible considering the price of new joycons. I was able to get this super cute look and change out some pretty well loved, boring grey joycons and now they look brand new, and fit my preference of style for maybe $30-$40 total with the price of the buttons included. That is a win in my books!

Really nice buttons, the colour and finish are fantastic. Can be a pain to install but worth it if you want to customise your own system

The colour was perfect & the feel of the buttons were super nice! Easy to customize with

Produto novo reflete as imagens

Au top, fonctionne très bien