- 511 Anti-Slip Treatment for Tile and Stone Floors, Showers, Pool Decks, Quart

I bought this product for my tattoo shop’s 1600 ft.² of marble tile flooring, I used 3 bottles, it goes a long way. I needed to seal it anyways, so I decided to get something that was non-slip because the floors were incredibly slippery during construction, I almost wiped out or did a split quite a few times. This stuff works amazing! Like you can’t even move furniture without it sounding like nails on a chalkboard. Doesn’t leave it sticky at all, however don’t expect the floors to be shiny, it’s more of a matte finish. Very easy to apply, we rolled it on with paint rollers and then wiped it up with terry towels, per manufacturers instructions. Good to go the next day. USE A PROPER VENTILATOR. We had no way to air the place out, even with the open door, so we had to step outside quite a few times, and some of those times we were a little light on our feet... if you know what I mean.

This is a miracle product! I have no idea how long it will last but it was so easy to apply and so inexpensive that the fact that it's still holding up after 2 months makes it worthwhile. I had looked at several other products at Home Depot and online with wide price ranges and often corrosive ingredients before giving this a shot. Our saltillo tile is normally incredibly slippery and a catastrophic accident waiting to happen whenever it gets wet. Now it has a texture to it that prevents slippage and causes water to bead. Very happy with this purchase.

So, I bought this product for the new. large format porcelain tiles I installed in our bath and into our shower. While they are DCOF (the slip coefficient for all tiles) rated for shower floors, I still worry about someone slipping. Water, soap and tiles never play well together! If you have polished floor tiles in a wet area, this is not the cheap, easy solution you were hoping for. The product is easy to apply and wipe off. You need to know that is a coating for the tiles, not an acid wash. What’s the difference? An acid wash changes the tiles surface, creating small indentations (not very noticeable, more like a matte finish) that adds grip, almost like grout does for small format tiles. This is a coating. Coatings do not change the surface of the tile and wear off. This creates a very slight matte finish to your tiles. I would NOT use this for gloss tiles or on marble. It does not leave a finish that will prevent you from slipping on wet polished tiles. It does add slip resistance to dry tiles. That said, on a tile with a DCOF greater than .50 it adds additional slip resistance wet or dry. But on polished tiles again, it will not add enough resistance to prevent falls. If you have tiles that are rated for floors and/or shower floors, this will add additional grip, especially when dry. If you have tiles that are NOT DCOF RATED for floors, do not expect miracles. The only answer in that case is to have a professional add or buy a DIY product that will acid wash the surface or use the plastic grip strips. Acid is permanate and will add some grip. However, if you want real grip on wet tiles, the only answer is to buy DCOF wet area rated tiles or acid wash. Sorry but you just can’t cheap out with a coating and get the change to the tiles surface you want. I know, not the answer you wanted but the truth.

I applied, Miracle Sealants ANTISLIP6 511 Anti Slip Penetrating Sealers, myself to a newly painted concrete floor in my remodeled garage. I use this space for a short term rental. The floor prior to using Miracle Sealants ANTISLIP6 511 Anti Slip, was very slick after a new coat of paint on the floor. The combination of water from outside rain on your shoes and newly painted concrete floors was a slippery situation. Once I applied one coat on the floor, the problem was resolved. The process of problem solving was very stressful for me. I was trying to figure out what I should do with such a slippery floor, but this product solved my problem! I applied it in January and it is now the end of May and it works just as good without having to re-apply it. I wash the floors with a gentle soapy water 1-4x a week. I would highly recommend this product.

I bought this for my very slippery kitchen and passage tiles. I was worried my aging dog would slip and hurt herself. The product itself is very easy to apply. Clean your floors of any dirt grease and previous polish applications, apply one coat, wipe off excess, wait a while and apply second coat. The smell is horrible but disappears quickly in a well ventilated area. When dry it does what it says, and provides grip. Unfortunately it doesn't last. In high traffic areas it stopped being effective and wore off after about 2 weeks. I have tried several other products that are basically the same and they all have this issue. I eventually bought non-slip tape. This works beautifully and its easier to replace when it comes unstuck.

My wife and I both have mobility problems and our bathroom floor was tiled with a white ceramic tile which was really slippery, especially if you had any moisture on your shoes. We bought this product and I put it down on the entire bathroom floor with just a long handle paintbrush. It works great! Thirty minutes after I put this down I wiped the floor with a clean white cloth to remove any excess and in about an hour we could use the floor again. The container is large enough that we have plenty for a second coat sometime in the future.

I followed the application directions precisely, including two applications, drying time, and wiping down between applications. Within 72 hours after application, the floor was no longer slippery. However, after only one week, most areas of the floor were slippery again, meaning that the product simply wore off. We didn't clean it, mop it or anything else...just walking on it with socks seemed to remove the anti-slip layer.

This is exactly what I needed. My steps leading to the upstairs were very slippery and wife fell down them once. I was looking for a slip resistant coating and tried this product. It goes on with a flat finish and is a very thin coat. I applied it over a polyurethane clear coat. It dries to touch in a few hours and the smell isn’t that bad. This worked out great. If you have slippery stairs you will be amazed at how well this product provides a non slip surface.

Brilliant product does what it says on the tin

This didn’t work as well as advertised. Barely noticeable change to the tiles.

Lo aplique en un baño para no resbalarme , se formó una pelicula invisible que sirve muy bien.

instale el producto hace no mas de un mes, segui las intrucciones tal cual, dos capaz de producto esperando las horas recomiendan entre cada aplicacion, incluso utilice el aplicador de la misma marca. el lo puse sobre el piso de la regadera, primer dia si se sinto un poco el antiderrapante y hasta el agua se formaba gotas, en menos de dos semanas el piso ya se sentia igual de resbaloso, incluso ayer mi niño resbalo en la regadera y golpeo la cabeza. si pudiera darle 0 estrellas se las daría ya que no cumple para nada con lo que dice.

Amazing - truely a miracle that doesn't cost the earth. We had a our bathroom done recently where my wife picked beautiful polished porcelain tiles. We wanted matching floor and wall tiles but our builder was reluctant as the floor became super slippery! Rather than change the tiles and have a floor that didn't match, we tried this liquid and couldn't be happier! The tiles look the same, the quality is there as is their shine but no more slips! Safely step out of the shower with wet feet and no worries. Don't often write a review but this product really deserves credit where credit is due!