Sunco 6 Pack LED Garage Ceiling Lights Wraparound Fixture 4FT,Linkable Shop Light, 3500 LM, 40W=300W, 6000K Daylight Deluxe, Hardwired, Surface Mount, Utility Workshop Light ETL.

I installed the 5 of these in my garage and it made a huge improvement compared to the regular light bulbs I had in there place before. They light up the entire room and are very bright making it easy to work on my projects even at night.

I'm very happy with these lights overall. The 5k lighting is very bright and everything seems to have their normal color but more importantly my whole garage is lit up again. When I replaced my old fluorescents with LEDs, my power bill dropped about $50-$100 a month depending on how much time I spent in the garage. Those were bulbs you had to rewire your ballast with and the company quickly disappeared after I bought them and imagine that, most of them died on me ;)I've seen SunCo around for quite a while so that's good when considering a warranty.There were 3 reported issues I'd like to give feed back on.Buzzing, Visible Wires, and the Evil Cover.Buzzing: Each one of them has a buzz/hum to it. It's not very loud but you'll hear em if it's quiet but I'm sure a casual conversation would be enough to mute it.Visible Wires: If you can see your wires, then you just didn't spend any time tucking them up. This is true for ALL shop lights and any light source for that matter. If you have an object in the path of the light.... You will.... See it! Only pull enough wire that you need and tuck back up as much as you can. There's a lip on the side where you can force your wires to stay and you'll never see 'em. One key thing I did was to NOT remove the taped wires from the LED lights. I left 'em in place and dealt with the hassle of connecting short wires but I have a clean install.Evil Cover: First, pay attention to how seamless these covers are to the frame. This is important when reinstalling ;) As for most this took some thinkin and tinkering but I have a consistent method now. First, get one of those cell phone repair kits with the nylon pry tool or really just a plastic non-marring pry tool. A guitar pick would be perfect!Wedge your pry tool under the cover in the center of the light, don't even bother attempting from the ends. Once it's wedged as far as it will go, do NOT pry with it. While holding the wedge, slip 1 or more fingers under the cover where you're wedging. Use your other hand and grab the light housing with your thumb running along the housing along the cover but NOT on the cover. The rest of your hand/fingers are gripping the side and bottom of the housing. Squeeze firmly but don't crush it and rotate your wrist outwards and you'll lightly bend out the housing. Now your other hand with the wedge and fingers under the cover and lift/squeeze and pop that cover off. VOILA! :D :\ Once it makes sense and you get it, you can do this repeatedly in a few seconds.Getting the cover back on now... Lining up one end or trying to line up one whole side works but it will take some effort and time to pop it all in and when you first get it in and think you're done... YOU'RE WRONG!!! :D Go up and down with both hands and you'll be able to keep popping it in. If you're in but too far to one side so the other side isn't seating, just grab the unhinged end and pull/slide it the other way till the other edge is fully against the hinged side, and then the unhinged side will finally play a bit nicer.This is why I said to pay attention to how seamless these covers are. You are not done until you get this back to the way it was when you opened the box. It'll look almost right but you'll be able to get a few more pops in then it will be 100% flush.Overall I'm very happy since I only have 1 LED tube vs. 2 LED tubes so half the power and the same amount of light as the T8 dual bulb re-wire your ballast LED job. I think I paid twice the price for just the bulbs vs. these too so overall MUCH MUCH better! They've only been up for a couple weeks so we'll see how time goes. If only I had taken care of this when I rebuilt my entire suspension and welded it with just the garage door lights and a lamp :D :|Have fun!

These fixtures are a great value, and throw a lot of light for the money.The best part is it is an American company and the light fixtures are made in Vietnam(not China).Good quality, great value and installs easy.

These lights came with all the hardware required. It even comes with an adapter so you can mount them end to end or a small extension wire to spread them out or make 90 degree turns. The light is decently bright and the lens diffuses the light well. They are light weight which really helps with installation. I only have a few minor issues. Of the twelve that I bought, one came with a cracked housing and another was missing the protective temporary plastic on the lens. There are enough holes in the housing that there is some light bleed through between the fixture and the ceiling. Not a big deal, but you'll notice it more if your ceiling isn't flat. The housing has holes to mount them directly to a junction box, but only in 1 direction or 45° off that direction. If you want to mount 90° opposite you have to use the wall anchors. Again not a big deal, but does increase install time. If you're hanging more than a few, do yourself a favor and create a mounting template as one is not included. These are all minor issues and I feel like they are a good value for the price, especially if you buy in bulk.

If you need a longer cable to link the lights, search amazon for SinLoon 9.8' linking cable. The cables in the box are just for linking together inline. https://www.amazon.com/dp/B07X53V8VD?ref=ppx_yo2ov_dt_b_fed_asin_title

It's wireless, easy to setup, easy to operate and recharge. Great lighting, fast on.

I ordered 18 of these for my 3-car garage and they do a great job of lighting the space. The 4k color temp is accurate and I have yet to see any color or brightness differences between any of the lights. I linked 6 lights per circuit and the install was super easy.

The light itself is nice especially for the price. If you have basic electrical knowledge, the light is easy to install. Although they're designed so they can be attached directly to round ceiling junction box, it isn't necessary to do so. I installed a romex clamp and wired the light directly. The junction boxes in my basement were existing and I wanted the new lights in a different area than the boxes. So, it was easier direct wiring instead of pulling new wire and relocating the boxes. I ordered the 6 pack and I like them so much I ordered another 6 pack. My complaint is shipping and packaging. The first shipment arrived and the box was damaged in several places but the lights were okay. Slight damage to one but it can't be seen. I just received a notice yesterday that the second box was so damaged that it was returned to the shipper. These lights are shipped via USPS in the factory box. No additional packaging whatsoever. With this being said, it's a roll of the dice whether or not you'll receive your lights damaged. If they aren't, you'll be happy you bought them. It seems Amazon is more concerned about the environment with their skimpy packaging than they are about damage to the product. Come on Amazon. Get your shipping act together. This isn't the first this happened to me with fragile items.

Easy to install and very bright. Look good and durable

very nice lights and easy installation. delivery was ahead of scheduled date .

Liked the overall quality, construction, simplicity, easy figment of diffuser, link ability. Wished for a hanging pull cord on/off switch option as have installed 2 sets of 2 in series but do not always need all 4 On, if pull cord on/off switch was installed this option is available. Light output is good & value for $ is very good. Now, if these last 10 years without problem, I will be very happy.

Bought these for my garage.Super easy to install ,super bright.

Easy to install. Works awesome