3D Printer Premium Filament PLA Galaxy Silver 1.75mm - 1kg Spool - High Precision ±0.02 mm - Easy to Print - Low Warping - No Tangling - Ideal for Beginners & Professionals

Excellent filament. I mainly print PLA, but there are so many more options with PLA -- including this "marble" variant. Looks very good, especially for printing statues / busts. Hard to beat Prusament, despite the cost.

A little pricy compared to others, but absolutely the best quality of anything I've ever used. For 'basic' colors, I may use cheaper stuff, but for advanced color schemes like marble, Prusament every time.

This filament prints very well. It is an off-white and very attractive. Like another reviewer, I was using this for a lighting project. I found this to be in the middle ground of transparency/diffusion. I tested this filament along with with 3D Solutech Real White and CC3D Silk White, I found the silk to be the most transparent / least diffuse - which for me meant it had hot spots where you could see the LED behind it. The silk also didn't print very well and left a lot of visible artifacts. I wanted to like it better. The Prusament printed well and was in the middle. I could still see some hot spotting. The white printed nearly as well as the Prusament, and diffused very well (trade off being the lowest in light transmittance).

Great Filament, it’s Prusa, enough said

Quality prints as always. Consistently good quality as expected from Prusa. Printer used, Original Prusa MK4

I use this with my Prusa MK4S. PrusaSlicer has presets specifically for its own filament, which makes this the easiest (not cheapest) choice. Stored in a bin with desiccant beads (keeping the humidity 25-30%), I've had no real trouble with this filament. For the sake of saving money, I usually buy Ziro, but I had to tweak the heat settings on the nozzle a bit. I believe I lowered the nozzle temp by 10-15 degrees C when using Ziro.

I am still undecided if this is worth the 2x price compared to some other PLA filaments. I think it’s worth the price for final versions of printed parts but for prototyping I will keep using the ~$15/kg alternatives. It is however noticeably easier to separate Prusament prints from the bed once finished which could help to not damage delicate prints. 215° nozzle temperature as specified on the spool caused stuck filament errors at the beginning of printing on Prusa MK4S but using the default temperature for PLA (230°) works great.

This PLA, while on the expensive side because Prusa doesn't have a distribution here, is somehow the smootest-printing PLA I've ever used. A rich yellow color mixed with the ease of printing with PLA! At least, the PLA was expensive when I got it... (could have changed)

It is somewhat translucent white not really opqaue. But print quality is fine.

Just purchased a Prusa Mini so seemed important to stick to their filaments to start with. This filament certainly sticks well to the heated base and breaks off easily when the printed model has cooled down. I think the fine tolerance of manufacture of this filament is useful to avoid clogging of the extrusion nozzle on my printer.

In questo caso non c'è molto da recensire. Classico filamento Prusa PLA. Testato su MK3s per varie stampe. Funziona alla grande. Ricordate di rimetterlo nel sacchetto dopo usato con la bustina cattura-umidità.

After all the PLA I've tested out over the years; I found Prusament to be the best. Definitely worth spending a bit more for the quality of filament; resultimg im much better print quality and adhesion to bed and itself. This one im particular jas am amazing magical quality to it's look and reaction to light. Highly recommended!

PRUSA MINIで使ってます。 他メーカーのフィラメントも数種類使ってますが、こちらのprusamentが ダントツで良い品質だと感じます。 出力も安定しており、ビシッとエッジが立ち、硬く強度があり、表面も美しい。 自分はネジ留め式の組み立て可動フィギュアを作るのに使ってますが、 さすがにABSやPETGとまではいかないまでも、関節に十分な渋みを確保できますし、 ダルさがなく、見た目もキレイな出力を得られるので鑑賞にも耐える仕上がりになります。 今のところベストなPLAフィラメントですね。 このまま、色数をどんどん増やす＆日本アマゾンでも気軽に買えるようになると嬉しいです！