Fundamentals Big & Tall Swivel LeatherSoft Office and Gaming Chair, Ergonomic Office Chair with Padded Armrests and Adjustable Height, Black

This chair was ok for about 6 months. Then it broke at the base leaving me on the floor. I was not hurt at all but it wasn’t fun and for $200 it should last longer than 6 months. I’m 150lbs less than the weight capacity of this chair and it’s mine alone so I don’t know. I’ve never had one break before like this.

I figured for the price, the chair wouldn’t be amazing, but it’s not a very overall good chair. First off, the chairs comfort is decent for short bursts. The problem is that sitting in it, feels like you’re going to slide out of it, due to the very shallow seat depth. I am 6 foot 3 inches, 330 pounds. Sitting in the chair feels very uneasy. It has quite a wobble on it while sitting in it. It’s very unsettling to say the least. When you roll around in it the wobble is pretty noticeable. It does sit at a decent height for tall people. The width is good, but the arm rest sit at a very low height. If you need a cheap chair for sitting in short spurts for maybe an hour or so, this does the job. I would not recommend this chair if you’re looking for something that you can sit in and use all day or even a few hours at a time. The constant feeling of sliding out of it, and the excessive swaying with any slight movement is not a reassuring feeling. The casters also feel very sketchy as well. So if you’re looking for a long use chair, that you’ll be spending multiple hours a day in, spend the extra money on one that’s built sturdier, and doesn’t make you fear moving around in it. Update: This chair is now so squeaky and wobbly, it’s maddening. The chair is also leaning to the left at an angle, and the padding is completely flat and I’m basically sitting on a flat platform. To top it all of two of the casters have seized up. DON’T BIY THIS CHAIR!!!!!!

I bought this for my father in-law, who is 6' 4" and 260 lbs. He is not a small dude. Here on the headlines on this product... Assembly was really easy. The instructions are hard to see with the small images, but that didn't keep us from building it in about 18 minutes. It fits him well. Again, he is not a small man, and the chair fits him very. He plopped down in it a few times when I was there, and there wasn't any issue. It is really comfortable. It has a fair amount of cushion, so comfortable to sit in for longer periods of time. I'll check-in with him to see if it wears down, but after a week so far so good. Pros Just as the title says... It was easy to assemble It is a good size for big dudes It is comfy And I'll add one more, which the price is really hard to beat. We looked at a bunch of chairs in this category and this one stood out. Cons I hate the directions that come with these type of chairs. Annoying. Would I buy again Yes

I've been using this chair for a couple of weeks and so far really like it. Fits me just right and is very comfortable. However, if you're looking for a BIG chair, look elsewhere. This chair is much smaller than expected, although it turned out fine for me. Description says weight capacity is 400 lbs. Sticker on chair says 300 lbs. So if you're looking for a extra large-capacity chair, this is not necessarily going to work for you. Also, I'm not convinced that this chair will last a long time, as one of the internal plastic parts arrived cracked. Probably why I only paid $135 for it.

Pros: Very comfortable Good back support Suitable for heavy people Cons: Confusing instructions Defective screw holes Literally next to impossible to assemble This chair took me nearly four hours to assemble due to defective screw holes. I could not align designated holes in the arm rests to the back and seat holes. When I could, the screws did not catch and did not tighten. I managed to put it together, with enough confidence that it would hold, through absolute brute strength. There is no reason for this chair to have taken as long as it did to assemble. Perhaps I just got the one defective chair in a batch of 100, even still, be prepared to struggle when putting this together. The picture-only instructions certainly didn't help at all either. Besides that, I will say, that this chair is very comfortable. I'm actually sitting in it now, writing this review. It doesn't hurt my back at all and I feel pretty confident that it won't break under my weight (and I'm not a light a person!) The base is very sturdy and made of thick plastic. It also looks pretty nice and is over all well made as far as the aesthetics ago. Like I said previously though, I did get a defective item and the fact that I got it together at all is pretty insane considering how difficult and ill-placed the screw holes were. The only reason I kept going with it was because I have no way to return it if it did not work. At a price of $133 I would hope for a little better quality control. It's not a bad chair, just mitigate your expectations when buying it. I wish I had.

I'm 6'4" and 340 lbs. It's hard to find good chairs that fit my body type and height, and that don't feel like they're about to break under me. Office chairs usually feel cheap and perilous. Not this guy. This chair feels sturdy. It feels like it's going to endure. The cushions are soft and finally give me the back support I need--the back support I deserve as an American, god damn it. And as an American, the easy-to-follow instructions were also much appreciated because my pride in my country keeps me from reading complicated instructions like a reasonable person. My one criticism since receiving and setting up the chair four days ago is that the seat is tilted just a tad forward and there's really no way to recline it at all. ultimately it offers better support for my back this way but I feel like I'm putting a lot more pressure on my legs than I prefer. That's a very small complaint though; it feels sturdy and doesn't maim my ass or my spine to sit in it, so what more could I ask for?

I bought this chair 3-4 months ago, it came with a cheap 2 inch hex wrench that didn't fit the size of the screws to put together, good thing I'm a mechanic and keep a garage loaded down with tools. Second, one of the wheels continue to pop off when moving around on carpet sometimes causing me to eat the ground. The ram/cylinder for the chair is the cheapest I'v ever seen, not only does it not hold pressure, but it also isn't even bolted to the wheel legs, it just sits in a hole, and will detach if you try to pick the chair up. Also, it sits a weird angle tilted forward making you feel like your sliding out of the chair unless you recline back. I would not suggest this chair to anyone. Spend an extra $50-$100 to get a far better chair. They shouldn't charge more than $100 for this garbage chair.

I am near 270 lbs and needed a sturdy chair (Trying to reduce the weight but I am for what I am right now.) This chair was well-packaged, easy to assemble, looks really good, and feels great to sit in for a few hours at a time. If anything I would say that the left armrest feels a bit squishy compared to the other, like it may not have had its padding glued down quite right, and the lower lumbar could use a more PLUSH cushion, but other than that it has been excellent, solid, and noise-free for the past couple of weeks. If anything changes I will update. 01/27/2021.