Electronic Cabinet RFID Lock, Hidden DIY for Wooden Drawer, Cupboard, Wardrobe - Punch-Free

Decided to install lock in my custom built media console when my 1.5 yo figured out how to open it and started to peek inside. Works perfectly without having to drill any key holes and such.Regarding installation, it was a tricky one. The included manual does not have installation instructions and it took me some time to figure out how to align both pieces to match. The trick here is to use double sided tape while you’re aligning them, so you do not need to drill holes to hold them in place. First, push the smaller piece into bigger one, then tape bigger one inside so that smaller one is almost flush with the surface where the door will be. Then add double sided tape to the smaller one, peel it, close the door (thus pushing the door against the tape), then unlock the lock with NFC key and open the door. The smaller piece will stick to the door thus marking where it should be. You might need to adjust the bigger piece forward and back (unpeeling tape and sticking it again) to ensure that the lock engages properly and does not leave a hole between the cabinet and the door.

This thing has so many possibilities. I used it to put a hidden lock on a cabinet. The signal passes thru 5/8 particle wood no problem. Its a little thick but nothing rediculous. Appears to secure the door quite well. The only difficult part about it is lining up the door latch part with the lock mech hole. Well worth the cost. Comes with several cards and key fobs.Update: been using this for about a month now and love it. Works great. It's invisible so no one even knows there is a locking device in its location. Nothing to pry and no one knows where to attempt to break in to. Batteries hold up well too.

I have programed the card with the master like the directions say. It will program the second card but the three key rings orangreish tabs wont program. Even after I asked how to do this it still wont work with the key ring buttons. But other than that it works pretty well/

Install was difficult but luckily I just had my gf crawl inside the chest and line it up from the inside! Lol very easy to set up...I have this to keep valuable locked up in a camping van. Pair this with some struts and you have hands free opening!

These things are great. I installed one on customers cabinet and had to get one for me. I love that you don't have a hole on a cabinet door. Great product !

Was fairly easy to set up and worked just fine until I went to install it about a week or so later and it just quit working. Changed out the batteries and that didn’t help either. I’m glad I caught it before I actually installed it or I would’ve had to trash my cabinet to get it open.

This is my 3rd lock of this type to install. If you do not have access to the inside while it is locked, getting the two pieces lined up correctly is a nightmare. For some reason there is never a template included. The instructions on this unit were so poorly written it was hard to determine how to even program this thing, the attached photo is the only instructions that came with the unit. I would not recommend this particular unit.

I put it on a desk drawer in my office. It is very strong. It opens every time I tap it. 2 1/2 years on the original batteries. I am ordering another one as I moved my office and left it behind with my desk donated to the next business instead of removing it. I left the access cards so they can enjoy how well it has worked for me.