--- product_id: 180479397 title: "MFM Peel & Seal Self Stick Roll Roofing (6, 6in. Aluminum)" brand: "mfm" price: "13238462₫" currency: VND in_stock: true reviews_count: 8 category: "Home Improvement" url: https://www.desertcart.vn/products/180479397-mfm-peel-and-seal-self-stick-roll-roofing-6-6in store_origin: VN region: Vietnam --- # MFM Peel & Seal Self Stick Roll Roofing (6, 6in. Aluminum) **Brand:** mfm **Price:** 13238462₫ **Availability:** ✅ In Stock ## Quick Answers - **What is this?** MFM Peel & Seal Self Stick Roll Roofing (6, 6in. Aluminum) by mfm - **How much does it cost?** 13238462₫ with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.vn](https://www.desertcart.vn/products/180479397-mfm-peel-and-seal-self-stick-roll-roofing-6-6in) ## Best For - mfm enthusiasts ## Why This Product - Trusted mfm brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description Item Package Quantity:6  |  Size:6in. Aluminum MFM Peel & Seal is the original, patented self-stick roll roofing. Peel & Seal roll roofing is 33ft. 6in. long and is ideal for roofs and surfaces that are difficult to waterproof and can be used on many surfaces including: metal roofs, mobile homes, RVs or trailers, and sunroofs. MFM Peel & Seal can also be used as flashing around ducts, vents, chimneys, air conditioning units, or even on gutters. MFM Peel & Seal is made of aluminum composite foil, polymer films, and a rubberized asphalt adhesive back, making it flexible and self-adhering. Peel & Seal roll roofing will not tear, crack or dry out over time. It is designed specifically to reflect heat and resist water and exposure to other elements without any additional coverage needed. Peel and Seal can be installed on an EPDM roof, but you must prime it with either WeatherBond Multi Purpose Primer or Mule Hide Tape Primer. This self-adhering rolled roofing is very simple to install. Simply make sure your surface is clean, smooth, dry and free of any loose debris. Be sure to prime your surface with an asphalt primer before applying Peel & Seal, especially on surfaces made of plywood, OSB, composition board, and masonry. After the roof is prepped, you will simply peel off the release paper on the back of your peel and seal, and roll it out onto your surface, using a hand roller to smooth out any creases. Finally, use a sharp knife to cut off the desired length. 36in. Wide Rolls have 3in. lines on each side. No special tools needed. High wind tolerance. Made in the U.S.A. Also Tested to Meet ASTM D 1970 Requirements. ## Features - Sticks to almost any surface and is secure and waterproof seal - Can be used on RVs and Trailer homes - Works on low slope and low pitch roofs - Length of Each Roll: 33ft. 6in. - Thickness of each roll is 45 mills - ›See more product details ## Technical Specifications | Specification | Value | |---------------|-------| | Manufacturer | MFM | | Part Number | 50006 | | Item Weight | 5.5 pounds | | Product Dimensions | 37 x 7 x 7 inches | | Is Discontinued By Manufacturer | No | | Size | 6in. Aluminum | | Item Package Quantity | 6 | | Batteries Included? | No | | Batteries Required? | No | ## Images ![MFM Peel & Seal Self Stick Roll Roofing (6, 6in. Aluminum) - Image 1](https://m.media-amazon.com/images/I/41+jO6-pFVL.jpg) ## Available Options This product comes in different **Size, Item Package Quantity** options. ## Customer Reviews ### ⭐⭐⭐⭐⭐ OUTSTANDING *by B***O on June 30, 2014* Peel & seal is very easy to work with, can be cut with a utility knife to the size you need. It sticks to just about anything that you need it to. I applied it to my entire mobile home roof with very little effort, I have a older metal flat roof mobile home and it had sprung leaks over the years. and decided to put a new roof on. some of the estimates for a new roof were between $5,000.00 & $8,000.00. I did the math! For just under $2,000.00 I did it myself, over time when I could, weather permitting and without breaking the bank. total time was about a month. I have had no leaks since and believe me living in Northern NEW ENGLAND we get a lot of rain. I recommend peel and seal to anyone who has a flat metal roof on their mobile home or any flat roof. At 63 yrs old, if I can do it so can you. ### ⭐⭐⭐⭐⭐ Excellent Product, but ... *by P***Y on July 23, 2019* I used this product on a series of small flat roofs that I built to protect condensers and a grill. Applying it to a complex shape takes some skill. One can easily get it all tangled up in itself and everything around it if one does not know the right technique for applying it. Basically, cut it to fit, lay it down, peel back the paper protecting the gooey side from a far corner to pin it down, then, keeping the product as flat and in place as possible, slowly pull the paper on an angle off the product. Pull in small sections and use a roller to iron out wrinkles as you go. Note that once applied, the product is aluminum, not white. I doubt that this product would stand up to rough treatment like falling branches, but one can walk on it once or twice while applying it to a larger area. ### ⭐⭐⭐⭐⭐ Waterproof and Reflective *by F***N on December 17, 2015* I have used this product on a couple projects and am very impressed so far. Most recently I used it to seal the roof of a shipping container that I am using as a waste storage building. The roof had rusted and was leaking in several areas. I first tried elastomeric roof paint, which helped but did not fix all the problems. Peel and seal to the rescue! It went on easy, stuck down well, no more leaks.Previously I used it on a flat roof addition to my home. The rooms below were warmer than the rest of the house as there is no attic space, only 6" joists. The existing roof was basically black tar paper. I applied the Peel and Seal to hopefully extend the life of the roof, but also for it's reflective value-to make the rooms below cooler in our South Florida heat. It definitely helped with dropping the temperature inside, and I also feel more comfortable walking around on the roof.I would strongly recommend wearing leather gloves while installing, as the edges can be quite sharp. ## Frequently Bought Together - MFM Peel & Seal Self Stick Roll Roofing (6, 6in. Aluminum) - Peachtree Woodworking Supply Extendable Heavy Duty Floor and Wall Roller for Laminate, LVP, Veneer, Linoleum, Carpet, Tile and Wall Coverings 7-1/2 Wide with a 17 inch Handle That Extends to 27 inches - ALCM Low VOC Asphalt Primer (1 Gallon) --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.vn/products/180479397-mfm-peel-and-seal-self-stick-roll-roofing-6-6in](https://www.desertcart.vn/products/180479397-mfm-peel-and-seal-self-stick-roll-roofing-6-6in) --- *Product available on Desertcart Vietnam* *Store origin: VN* *Last updated: 2026-05-20*