SOCAL-LED LIGHTING H13 9008 LED Decoder Upgraded Strong Canbus Error Code Warning Canceller Anti Flicker Relay Adapter, Pack of 2

Hated that I had to find and buy these to make the LED bulbs I bought work. They were supposed to be plug and play. They did state 98% of vehicles. You would think they would have FIXED the problem themselves.THIS PRODUCT FIXED THE PROBLEM !!!

My father happy with it stopped the headlights from flickering off and on now he doesn't have to worry about his lights no more

only worked for 3 days and the headlights are going out. They are 40w resistance and working with their tech support they directed me to try a set of 50W ones. Will advise if the 50W fixes my issue. Well the new 50W resistors didn’t fix my issue either on my 2015 Ram 3500 not because of both of the resistors it’s due to the fact the truck is configured for conventional bulbs. The truck needed to be configured for LED bulbs. There is software out there in the world to perform that and if you ask the dealer they will tell you No!

Great review

Switched to LED in my 03 forester and the headlights and fog lights went bananas. Flickering and binking, not recognizing hi/lo beam, sometimes just cutting off altogether. Got these a few days later, had them on in minutes, lights started to act right again. Make sure your plug has a good, clean connection. And it wouldn't hurt to wrap a piece of electrical tape around the connection or put a bit of silicone grease between them to keep them dry.

Despite description and Amazon's "verified fit", it DOES NOT, repeat: DOES NOT work in a 2009 Honda Fit. That description "fits low beam" is nonsense from a non-fluent English writer. In my car, high and low beams come from the same bulb. This unit disables high beam altogether. Why sell this for this car model? Under what conditions would this be acceptable?All this does is get rid of the DRL warning light on your dash, which, along with the metal housing, are the only reasons I gave a second star. It causes more flicker, when installed, in the bulbs than without. Unacceptable.

I used these on my 2015 BMW X3 to stop the error codes and prevent the lights from flashing back and forth when I installed new H7 LED headlight bulbs. They work fine and stopped the errors on the dashboard.

installed LEDs on my 2010 honda fit sport. i dont want daytime running lights on this car because i dont like how they are implemented, when they activate, etc. so installed these along with my LEDs, which were still attempting to behave as DRLs. so i pulled the DRL fuse. problem solved, no errors on dash, no DRL's, LED headlights just great. unsure if these actually help though, or if i shoulda just pulled the fuse and been done with it.

Los compre para una actualización en los faros halogeno-led de una Jeep 2010 con conector H13, tuve que doblar un poco los pines de mis focos para que entraran correctamente ya que estan un poco desfasados los del decodificador... despues de unas mexicanadas y suficiente cinta de aislar todo funciono OK y mis luces dejaron de parpadear/apagarse al darle marcha a la camioneta

Buen producto que si funciona, evitan la falla de parpadeo y en mi caso se apagaba un foco, estos solucionaron lo anterior, los recomiendo

Worked well for 3 months then one stopped working

Sulla mia Jeep Compass sembrava che non ci fosse modo di installare delle lampadine a led. Accendevano per pochi istanti e poi si spegnevano. Lampeggiavano. Non davano segni di vita. Con questi adattatori ho risolto in pochi minuti. Sono un po' più grandi di altri ma non scaldano e, a quanto pare, anche i led scaldano di meno. Ho preso dei coprifaro in gomma un po' più grandi degli originali e li chiuderò dentro. Così evito di doverli fissare all'esterno del faro.

I have recently purchased a pair of Katur all in one led head lights H4 for my Vauxhall Vivaro 1.9 DI (x83 2005).I have installed the led lights correctly but when I turn on the low beams, the high beams also turn on (at slightly reduced power).The low beam lights appear on the dashboard together with the high beams.When I turn on the high beams it work and on the dashboard there is the high beams light on only.However, I noticed that when I mount a led on one side and the halogen bulb on the other everything works correctly (high beam and low beam).So I bought this decoder (SOCAL-LED 2x H4 9003 LED) and the problem was solved. The low and high beams now work normally.