Aluminum Tent Poles Replacement, Fits Both Female and Male Ends, Lightweight Tent Pole Repair Kit, 7001 Aluminum Alloy T6 Heated

These are high-quality aluminum tent poles. They were easy to assemble.I used two of them to replace my end support poles for my Coleman Montana eight person tent. The poles were thinner than the original poles, but just as strong, and more flexible. Not to mention much lighter than the original fiberglass poles. The Coleman Montana design does not work well with fiberglass poles. I’m glad to have gotten these aluminum poles.

Worked well for replacing my broken tent pole. Was easy to make it the right size to fit my tent

They should include at least one more of the elastic rope. The material is not as flexible as the originals, but they work.

Way better quality than that fiber glass cr*p. Comes with tiny washers but I just tied the elastic cord directly to the end pins with a simple double knot and it works fine. No need for washers

Works as advertised. The 2 pack of 9 ft poles will create a decent canopy from a USGI poncho.

I bought these to replace the failed, splintered main tent poles for my Coleman Red Canyon tent. After struggling to identify the correct OEM replacement kit (despite the part number provided in the tent instructions) as well as finding an OEM complete replacement set, I decided to go with this product. Bottom Line: This set is an excellent UPGRADE to the OEM poles. They do the job and then some. I bought the two pole kit to replace both poles. The instructions are adequate, but may be a little confusing if you try to use their methodology for measuring. If you are replacing the poles on the Red Canyon tent, here's what you really need to know: 1) You'll use all the poles. Measuring the OEM poles gave me 238.75"; the pole kit, using the female/female ended configuration, is 240". 2) You'll shave a little on the "B" segment, and a bit less on one of the "A" segment (B segment should be cut 1/2" longer than the A section, according to the instructions. Make sure you make your cuts perpendicular to the pole segment for proper fitment - I used a vice and a Dremel with a small cutting wheel. 3) You'll need to tie some knots on the ends of the cord, then start feeding the pole pieces in. Make sure you're feeding the poles in the correct order and orientation. Check on each step. 4) The lead wire used to feed the cord through each pole segment, as you are building your pole, may get hung up inside the pole - you'll need to make sure the wire is as straight as you can get it. I built these poles this past Friday, and field tested them this past weekend. The hooks on the Red Canyon tent had no issue hooking onto the poles. For anybody looking for replacements for their splintering fiberglass poles, I highly recommend this product.

These are OK. Assembly is quick and easy, although having to tie a knot in the end of the cord to secure to to the ends of the pole-assembly is problematic. It leaves a lump of cord-knotting at the end, and if you need to thread the pole through any sort of fabric loop, it is problematic. It would be better if the manufacturer came up with a better solution to tying off the cord. Like some other buyers, I also use these for a tent fly sun-shade at the beach. The arch of the bend is not very tight (see pictures), but after a day of use I find that the sections at the apex of the arch are difficult to separate (and sometimes almost impossible to separate). Taking a closer look at the problem, it seems that the metal ends of each pole section are made of a metal that deforms a bit to much for this sort of use. To get the pole sections to separate I have had to bend the poles back slightly until the socket ends go back to a rounder shape, and then the sections can be pulled apart (not easily though). I have only used the poles 5 or 6 times now and I am bit worried that with continued deformation and then having to re-bend the pole sockets, that the pole sockets may fail prematurely. It's too bad because otherwise these are a decent enough pole set.

Worked great to fix a broken tent pole. Can cut them to length fur a perfect fit.

Lo utilice para hacer el juego faltante de una tienda Muy fácil y excelente material

Perfect application for my sagging side tent which attaches to my teardrop tab trailer. Made some wood disc bases with grommets for floor and keeps my tent from sagging in middle! Not heavy duty but working well for my application.

Good instructions and robust poles. Note, because the poles are aluminum, a pipe cutter is helpful for precise cuts. Can make any length of pole from the supplied packages both male or female ends (as long as your original pole is less than the length of this kit). Instructions are clear. Suggest get a longer total replacement length so you end up with a spare segment for future should you need it. I upgraded to a thicker pole diameter for a more robust replacement as my skinnier original tent poles showed cracks after several years of use.

I used these tent poles for building a costume. They fit together well and were well made and sturdy.

Super produit très fait, livraison 4 jours avant la date prévu.