for Tesla Model Y Screen Protector 2024 Matte Anti Glare for Model 3 2023 Fingerprint 15" Touchscreen Navigation Touch Tempered Glass 2022 2021(Upgrade)

The ShowEv Tesla Model Y/Model 3 Screen Protector is a stellar investment for Tesla owners seeking to safeguard their touchscreen. The installation process is seamless, with the included kit ensuring a smooth, bubble-free application. Once applied, the protector offers a crystal-clear display, maintaining original touch sensitivity without compromise. Noteworthy features include anti-glare and anti-fingerprint properties, ensuring optimal visibility and minimizing smudges. The hydrophobic and oleophobic coatings add an extra layer of protection against liquid and maintain the screen's pristine appearance. Overall, the ShowEv screen protector strikes an excellent balance between durability, functionality, and preserving the aesthetics of the Tesla Model Y/Model 3 touchscreen, making it a highly recommended accessory.

Up until writing this review, I was still using the screen protector that was attached during assembly and delivery, of course, to keep the screen brand new. While the screen protector provided did a good job at protecting the screen from dust and fingerprints, there was a noticeable glare; perhaps the protector provided was meant for temporary use. This screen protector from LMZX (or TopFit based from the packaging) does the job well; it comes with everything you need to install the screen protector with ease (minus an alignment kit).Installing the screen protector is easy. Do keep in mind that if you want to have a dust-free installation, you do need to close your windows and turn off the A/C. Since using the A/C is prohibited, I also suggest installing the screen protector early in the morning (around 7-9AM) when it is still cold so you don’t have to deal with sweat distracting from the installation. Using nitrile gloves can also be helpful to keep the screen protector as clean as possible. If you still have your temporary screen protector on, there is no need to use the wet wipe provided to clean the screen, or use the dust absorber if you are lucky enough to not have any dust particles floating around. I’d still suggest using the dust absorber to make sure no dust is settling on the screen. Once aligned, the screen protector should adhere easily on to the screen, without having to use a card or a squeegee. If there are bubbles, you can still take off the screen protector and clean, or lift off the screen protector and work in small sections by flattening it.Once the screen protector is installed, it does a great job of reducing glare. However, with the matte finish, there is a decrease in brightness and sharpness, but not to the point where it is hard to see things on your screen, so the small decrease should not be a big deal, and you get used to it over time. Touch inputs still work; no phantom touch or screen glitches. In terms of reduction in fingerprint smudges and marks; clean and dry fingers is the key to avoiding fingerprints, well for me at least. It looks like my skincare products (sunscreen in particular) are the culprits to the fingerprint marks; frequent hand washing seems to solve this problem. This screen protector, overall is great if you need protection on your Model 3 or Y screen.

This review is for the matte screen protector. Easy to install and works well at blocking finger prints and sharp glare.Notes:* It has a very fine fine matte finish. Hides finger prints well.* Reduces well defined glare be diffusing the light (as one would expect). This can sometimes have the side effect of making larger parts of the screen harder to see in certain lighting.* Does not noticeably dim the screen.* Touch screen works great after install. I rebooted it to be safe after install.* With polarized sunglasses on, there is a slight rainbow couture. I suspect this is from micro stress in the glass/plastic from me peeling the screen a couple times, as it followed the contours of my peelings.Tips for install (had to try a few times to get it right):* Make sure you thoroughly clean the screen before installing. ANY piece of dust between the screen and the protector will leave a noticeable pea size bubble. Let the screen fully dry before installing.* The protector is NOT a sticker. It adheres through static electricity. DO NOT touch the back of the screen during install. If you do, it is light a magnet for dust and finger prints. Use the included dust remover "sticker" to clean the back if you do.* Start at the top, get the alignment right, and press the top inch to adhere. I then let the protector naturally "fall" and stick to the screen. In my case, it did so at a 45 degree angle downward and I used the cloth to rub out the last bubbles in the bottom right corner.* Do not be afraid to fully or partially peel off and try again, just don't touch the back. I hard to partially peel several times to get bubble areas out.

This no-glare seems to work well and was easy to install.

This product is of good quality and is highly recommended. Installed it on my wife's Model Y and it looks great.My 2 cents below:Pros:- The screen looks good. The touch does not deteriorate at all and it looks clean and clear- Matte finish gives the screen a nice look- Glue is strong- All wipes and needed items are included- Good screen coverageCons :- These are definitely expensive compared to other competitive options but I would go for this because of the quality factor

The cheap quality product made in as always main land made me almost return it. I bought two and both of them were $.50 plastic screen protectors.Don’t recommend this product

The greatest thing is no bubble you typically deal with screen protectors

Clean main screen, apply in place.Instruction has small grammar errors but application is self explainatory. Follow arrows.Final look is slight opaque look

I have installed a few of these screen protectors in S and Xs of family members and I have one piece of advice to ensure it turns out almost perfect... TURN OFF THE CLIMATE SYSTEM! No matter how much smudge and dust removal you do, if you have the air blowing around it is inevitable a speck of dust will fly onto the sticky part of the screen protector and ruin it!My other piece of advice is to have a trusted family member do the installation. That way you won't know where any issues (dust particles) might be and you will never really notice.This one applies easy as it comes with a jig. The higher quality screen protectors do.My only complaint isn't about this product, but more the category of tesla car screen protectors. WHen the sun shines in and hits the display from the passenger and drivers side windows it illuminates the entire protector and makes it ever so slightly foggy. It isn't for long and I can still see throguh it perfectly, but for that split second I am annoyed by it. I was more annoyed by the glossy finish of the unprotected screen, so this is a very minor thing.This protector is great! Installs easy and looks as good as screen protectors twice as expensive.Recommended! Enjoy your new ride!

This is my second top fit screen protector that I have used on my model 3. The first one broke after the Ottawa Tesla Service shattered it by mistake when they did service on my car. The second install of the same screen protector was easier due to the placeholder, giving it a cleaner look and less bubbles compared to my first install of the same product. I would recommend this model or other ones on Amazon.

Super facile à installer en suivant les instructionsEffet mat attendu je recommande

Malzeme mat . Parlak olanı tercih edin.

Het is vooral belangrijk om het scherm goed stofvrij te maken voordat je de protector aanbrengt, maar er zijn alle middelen bijgeleverd om dat te doen. Omdat het een redelijk dikke protector is, is het aanbrengen zonder luchtbelletjes eronder goed te doen.En het is een fijne gedacht dat het scherm beschermt is, mocht er een keer iets tegenaan stoten.