4Pcs Anti Vibration Washer Pads, Washing Dryer Machine Rubber Stabilizer Mat Foot Support Protects for Anti-Walk Noise Reduction and Shock Absorber

These things are the bomb! We have a very, very tight space for our top load washer and dryer and it took us about 30 minutes to get them installed. The back ones were hard but we managed with a grabber and flash light to get them properly placed. We put them on the dryer as well so they would be the same hight. We simply cannot believe how well they work! Why didn't we put them on years ago?! Our washing machine would shake, shimmy, and bang on both large and small loads. But now, it quiet, and spins without the shakes! Great product.

Our old washer would skate all over our laundry room and finally died, so we bought a new set. I built a pedestal to put our new washer and dryer on and was determined to make it stable. I used a set of these pads on both the washer and dryer. Only added to the dryer so the height would be the same. Anyway, the pads hold the washer in place perfectly, absolutely no movement!

I bought these thinking it will stop the vibration but it was only able to reduce the vibration, which is an improvement but not my desired results. Easy to put in place and pretty sturdy.

I have an ancient Bosch front-loader that just loves to boot-scoot-boogy all over the floor. The floor itself is 2x10 joist spaced 16" with osb sub-flooring and cheap vinyl on top. The wide base of these is 100% holding my washer in position even with bulky loads. I was not expecting it to run smoother or quieter but the difference is noticeable. Really pleased with these! I recommend one of those hand-pumped air bag jacks to help safely install them.

A friends washing machine was walking or moving around when she would wash clothes. I ordered these for the washing machine and they did the trick! They stick to the floor thanks to the bottom suction cups and stop the machine from moving around. Its been about a month now and they're still working great.

Washer still walks all over the floor

We have a front load washing machine that would often "walk" out on the left side. After installing a new tile floor, I bought these hopping they would stop the washing machine from moving (and prevent the tiel from getting scrateched). They have worked great! Not only has the washing machine stayed in the exact same place for the past month, it also seems to do much better on the spin cycles. Specifically, it is able to reach top spin speed without banging around and having to stop and restart like it used to.

Installed, but the washer is still shaky and unbalanced.

The machine still wander around :(

Saw a lot of dampers on Amazon, but went for this for the sheer physics of construction. Stays low to the ground, high density rubber, does the job like a pro.

Our washer could be heard outside the home when spinning a heavy or unbalanced load. Tried these on a lark and the change is remarkable. Now a spin cycle can’t be heard unless standing right outside our laundry room door and even at that, it’s a quiet hum. Our front loading washer is in a tight fitting space which gave me some concern with respect to installation. That concern was misplaced. We simply put the front ones on first, tilted the machine to the extend we could and just used a stick to position the rear cups and lowered the washer. The total install time was well under a minute. We have stone replicating floor tiles complete with small ridges and the suction is not affected. The machine does not move. We ave no difficulty recommending this product. You won’t be disappointed

Good soft rubber so machine doesn't slide even on a smooth tile floor. Machine would always slide around before I installed these.

Complete worthy product... Serves it's purpose