ERYONE Wood PLA Filament 3D Printer PLA Filament 1.75mm +/- 0.03mm, PLA Filament 1KG Cardboard Spool(2.2LBS), Light Wood

I just recently started using ERYONE Brand Filament, but thought I would give it a try since it was decently priced and they had some unique colors that were not available from any other filament line. I was a little hesitant at first as I hadn't heard of the brand before, but after going through several rolls of filament in the last few weeks I have to say I am quite impressed. After drying the filament for 2 hours at 50 degrees Celsius, which is my usual standard practice for all PLA filament, I printed this dragon fly with a 4mm nozzle on my Bambu X1C in under 4 hours and it came out perfect with zero stringing, great layer adhesion and a consistent flow rate that gave the model a very uniform appearance without any signs of deviance in layer height. I also noticed that this filament works well with every other filament brand I used it with which is something I have had an issue with several filament brands lately. So when using the exact same filament type you should be able to use different brands with no or little issues in layer adhesion or shrinkage, but I have found several brands lately where PLA, PLA Plus and PLA Tough don't want to adhere and end up separating after printing. Fortunately I didn't see any of these issues when using ERYONE PLA Filament with Bambu, Overature or Polymaker and over all the filament worked perfectly with every filament brand I tried which is a great plus for me as we keep an extensive catalogue of unique colors and ERYONE's Blue Burnt Titanium is one of our favorites, so knowing that it will work with all of the other filament brands we use is a huge plus since it means we don't have to keep extra base colors around and a list of which filament brands work, things will just work and we can spend less time having to worry about filament compatibility and more time on making prints. Overall, this filament is fabulous with a great price per gram and fantastic inter compatibilityrating I want to note that a lot of people have given this filament a 1 to 3 star review noting bad layer adhesion or bad bed adhesion. This is usually caused by the filament not being dried before use. Now, I have gone through 4 rolls of the ERYONE filament so far and that includes two rolls of the burnt titanium and 2 rolls of red PLA-CF, and as long as the filament has been dried properly I have never had a single issue with this filament. In fact I would say it's in my top 5 filament brands and we have used and tested about 15 different filament brands over the last two years. If you want to really improve your prints take the time to dry your filament, it makes a huge difference. Secondly I would recommend that if people are using a filament for the first time that they also take the time to print a temp tower and a retraction tower to make sure that they have a good idea of the capabilities of that particular filament. Dialing in your printer is simply not good enough, you need to make sure you dial in your filament. Once you have dialed in your printer and your filament you will end up having a much more enjoyable experience and enjoy much finer quality prints.

I am always scouting for a good value, high quality filament for one-off or proof-of-concept pieces. After beating up various forms of ABS and PETG, I’ve settled on PLA for the vast majority of these jobs, due to its nearly non-existent odor and stability during longer print times. I’ve also found that there are surprising variations between manufacturers’ spools of the 1.75mm diameter stuff. Everything from the way the filament sometimes hangs as it unspools during a print run, to the consistency of the melt during extrusion while the Printer is encased in a carefully temperature-and-circulation controlled cabinet. (I’ve had some PLA literally break on its way to the hot end, after passing the extruder gear. I’ve also experienced excessive “ooze” with other brands of PLA, under the same exact printing settings and conditions.) I’ve even seen some slight color shifting post print— even with the white filament. After spending the better part of the last year experimenting with more than 10 different sources of PLA, I’ve found two that yield very consistent results at my standard settings: 0.4mm brass or tungsten extruder 210°C Nozzle 80° heated bed (metal/borosilicate glass/Ziflex magnetic pad) 100% fan for first layers, 50% for remainder Heated cabinet at 60°C The first of these is sourced from the printer manufacturer of my smallest printer, the SnapMaker V1.0. I’m very pleased with their filament performance and availability over time. My latest happy outcomes have been while using the ERYONE Filament in PLA, 1.75mm, in the 1kg Spool, in White. The overwhelming majority of my prints are for technical applications, where dimensional stability, accuracy and repeatability across multiple copies is critical. The Eryone filament has not let me down during multiple printing sessions, some longer than 11 hours. No lifting, warping, excessive oozing or discoloration noted, even while printing those critical first few layers, which have to remain absolutely static over the entire time span of the print. With a clean nozzle and extruder gear, this filament is a top performer. Where I was most pleasantly surprised was during those jobs where the nozzle head was just a bit “scummy” with PLA residue and there were some PLA “grindings” inside the extruder from previous PLA transit— the output was still consistently outstanding. Overall, I’m very pleased to have found the Eryone PLA filament at a very agreeable price point here on Amazon. The fact that it’s regularly stocked also means I’m only a day away from order to install- good times, indeed. As I amass more time with this filament, I’ll be sure to update this review with any new factoids. For now, let me simply state that I’ve found my new favorite PLA filament- Eryone’s got a winner on that spool. (tl;dr): Consistently great prints; no odor, jamming, breaking, discoloration, even during extended print times. This is the good stuff!

creates a beautify product with a metallic look

Nice filament came in a sealed bag as usual with good filament. I like the color and it works and functions as expected on my Bambu printer. Not one of my usual colors, but it's nice to have the variety of these unique looks.

I purchased this filament because I thought the color & finish looked great on the main photo. I also was unfamiliar with this brand and wanted to try it out. After printing three items on my Bambu P1S, I can say that this filament does print well. I had no problems with adhesion, stringing, etc. However, there are a couple of issues. Mainly, the finished result does not look like the photo in the listing. The listing photo shows the filament to have a glossy, blue-green appearance. The actual appearance is more of a flat charcoal with green sparkles throughout. While the final result is still nice, it is not what I was expecting when making this purchase. I am now somewhat hesitant to buy more from this brand.

This Eryone Marble filament prints nicely without any clogs or stringing. The cardboard spool worked in my Bambu AMS unit without difficulty. It works perfectly as the background for my Pokémon coins. I've already purchased more!

Great product

Eryone non si smentisce. Qualità ottima, consegnato in sacchetto sotto vuoto riutilizzabile, ormai raro, avvolto benissimo. Bambulab profilo silk, stampa perfetta, i supporti vengono via facilmente e la stampa è liscia con altezza layer 0,12mm. Effetto voluto raggiunto!

Ero da tempo alla ricerca di un bel argento di questo colore. Sono rimasto davvero colpito da quanto sia bello il colore soprattutto dalle varie tonalità e brillantezza che assume a secondo della luce. Nel complesso il PLA sembra davvero molto buono, ottima aderenza al piatto (vetro senza lacca con Anet A8 stock). La bobina sembra avvolta molto bene ed arriva in una ottima confezione sottovuoto e dentro la classica scatola di cartone. Le immagini sopra sono state stampate con layer 0,32 per la figura Uomo-cane a 190 gradi, e 195 gradi il busto. Forse meglio a 190 gradi. In definitiva, ottimo PLA ad un ottimo prezzo e con tutta la garanzia di Eryone. Stra consigliato !!!

Este filamento tiene un tono rojo muy bonito me encanta

Filamento di alta qualità per stampe eccellenti e affidabili "Ho acquistato il filamento ERYONE PLA da 1,75 mm per diversi progetti di stampa 3D e sono rimasto molto soddisfatto dei risultati. Se stai cercando un filamento che offre ottime prestazioni, facilità d'uso e un buon rapporto qualità-prezzo, questo prodotto è una scelta ideale. Caratteristiche apprezzate: Precisione dimensionale: Il filamento ha una tolleranza di diametro di +/- 0,03 mm, il che garantisce un flusso costante durante la stampa. Questo si traduce in meno problemi di estrusione e una qualità di stampa più uniforme. Facilità di stampa: Ho trovato questo PLA molto facile da lavorare, anche senza un piatto riscaldato. L'adesione al piano di stampa è ottima, riducendo al minimo il rischio di deformazioni o distacchi durante la stampa. Qualità delle stampe: Le superfici delle mie stampe risultano lisce e con dettagli ben definiti. Il filamento si fonde in modo uniforme, permettendo di realizzare modelli complessi senza problemi. Varietà di colori: ERYONE offre una vasta gamma di colori vivaci e interessanti. Personalmente, ho provato il colore bianco e il risultato è stato un bianco puro, perfetto per successivi processi di verniciatura o finitura. Difetti riscontrati: Confezionamento migliorabile: Anche se il filamento arriva sigillato e con un sacchetto disidratante, ho notato che la bobina non ha un foro per bloccare l'estremità del filamento quando non in uso. Questo può causare srotolamenti accidentali se non si presta attenzione. Ho risolto utilizzando un fermaglio per tenere fermo il filo. Sensibilità all'umidità: come molti filamenti PLA, è sensibile all'umidità ambientale. Consiglio di conservare la bobina in un contenitore ermetico o utilizzare sacchetti con zip e bustina di gel di silice per mantenerlo asciutto quando non in uso. Consigli personali: Impostazioni di stampa ottimali: Ho ottenuto i migliori risultati stampando a una temperatura dell'estruso tra 200°C e 210°C e con una velocità di stampa di 60 mm/s. Ovviamente, potrebbe essere necessario adattare queste impostazioni in base alla tua stampante. Test iniziale: Se è la prima volta che utilizza questo filamento, ti consiglio di stampare un piccolo modello di prova per calibrare le impostazioni e assicurarti che tutto funzioni correttamente. Conclusioni: Il Filamento ERYONE PLA 1,75 mm è un prodotto di qualità che offre risultati affidabili e di alto livello. È adatto sia per principianti che per utenti esperti che cercano un filamento facile da usare e che garantisce stampe di qualità. Nonostante qualche piccolo difetto nel confezionamento, i vantaggi superano di gran lunga gli svantaggi. Spero che questa recensione ti sia utile nella tua decisione d'acquisto.

Deze Wood pla is heel erg slecht. Het is jammer geld!