PfisterS10-3300 Three Handle Porcelain Cross Rebuild Kit, Polished Chrome Large

This was a direct replacement for a Price Pfister cartridges and diverter. Very easy to install,just make sure you have the right tools.Our old cartridges were probably original to the home that was built in the 70s. One of the porcelain handles fell of and cracked. I didn't want to replace the entire valve system from the rear so this was a great option.I tried using a large flat head screwdriver to remove the compression seats and the seat stsrted to strip very easily. It was soft and brittle. I ended up buying a seat wrench and they popped out no problem. I had a cartridge socket wrench that ended up being the right size to open the cartridge but not actually remove it from the wall. Once I had the right size wrench everything was easy.Parts look great. Everything was included in the kit that I needed for a complete replacement, except the tools. I included a picture in case you want a better idea of what comes in the box.

The parts seem well made and of good overall quality original Pfister branding. They come with new water valves, a new center shower diverter, new seats and trim kits with the handles. Have a 42 year old house and the old setup had the acrylic Windsor handles that were always getting wet and mold inside the acrylic where you couldn't access without disassembly. The old diverter was leaking out the faucet when showering and the hot water valve would leak from the center when on. Glad I found these. I didn't notice the picture on the front shows the handle shapes these will fit. Look at the closeup of the front of the box. As always when I fix something on this old house there is always unknowns. None of which was the fault of this kit. the kit is near perfect except one faucet is going to turn off and on backwards from what you are used to if you get the cross handles and don't get the levers. Not a problem just mentioning it. Now for the unforseen. The old diverter seat broke into small pieces on removal. The cut outs in the tile wall fit the old setup but I needed to get a Dremel and grind a little more out on all three tile openings to get the trim kit to fit over the new valves. Again not the kit but my wall was the issue. So this is a 20 or 30 minute job at the most and if you have unforseen things come up it may take longer but it's worth it. Great kit and worth the money to update an old house without cutting into the wall or doing any major plumbing.

I can't comment on the replacement valve stems, as I only purchased this for the taps themselves. Hopefully I won't know for 20-years or more whether they are a good replacement.The taps themselves are weighty and seem to be well made. They are porcelain, so be careful you dont drop them. Everything was packaged well and I found them to be easy to install though the instructions aren't very clear. I'd recommend these taps to anyone looking for a higher quality shower/bath tap set with a bit of classic styling, I just wish they were sold separate of a full valve replacement kit.

These look so much nicer than the crappy pot metal handles that used to be there.Handy tip, the multi-size faucet valve seat wrench that seems to be the only one available will not work with the center valve. It's too long and hits the back before the size you need can actually reach the valve seat. I didn't know why I couldn't get it out so I had to call the plumber. He is used to working on old plumbing so he had one that was ground down enough to fit. Other than that it was an easy job and now everything works well and looks beautiful.

- this tub shower kit includes 2 hot cold stems “910-013”- kit includes 1 diverter stem “910-022”- includes 3 seats “970-500”Price Pfister makes quality bath and shower kits and the parts can be found at Home Depot. It’s great to find a brand that makes a quality item that doesn’t need to be special ordered.It took me a while to figure out what stem and handle I had and what I was going to need. The box for this tub and shower remodeling kit doesn’t explain what item numbers you’re getting… so please do yourself a favor and look at the picture in my review where you can see a photo of the exact items included in the kit.With the right tools you can easily uninstall the old handle/stem/seat you have and replace it with the ones in this kit. I recommend a 31/32” shower valve socket wrench (husky makes one that fits 29/32 and 31/32 in hex valves. Got mine at HD for $8). Also recommend a seat wrench. I like the husky T handle faucet seat wrench. Can also be found at HD for $19.) get some Oatey’s plumber’s putty too and you’re good to go!

Got these replacement knows for my 75 year old Pfister tub fixtures which just looked old. Had our plumber install them. The center shower control nob didn't quite fit on the post, so my plumber had to fiddle with it. After about 30 minutes it was all done. It looks spectacular! Almost as good as a remodel. So if you want quality, pay for quality.