Elevate Your Projects with Titanium Power! 🚀
The LTKJ 5pcs Titanium Ti Grade 5 Metal Rods are precision-engineered with a diameter of 3mm and a length of 25cm, making them ideal for high-performance applications in aviation, aerospace, and chemical industries. With exceptional corrosion resistance and a high melting point of 1660℃, these rods are designed to meet the rigorous demands of modern engineering.
C**O
It worked
It worked lol
D**D
Exactly what they said it was... Solid rod
I'm only writing this review so that people will know that as of this date, at least the rods I ordered were all solid as advertised (contrary to what another reviewer said they received). I have been cutting these rods into 1-inch lengths, for a special electrolysis project, and so far all have been solid.
D**N
Nice Ti rods, slightly oversized for precision fit.
I used these for hinge-pins for a RC drift car’s suspension arms. I created 4 pieces 46mm in length and two pieces 27mm in length with a notch in the middle for a set screw.They are indeed solid, stiff and light. They are quite hard, and slightly difficult to machine with hand tools. To cut them i used my Dremel with a cutoff wheel, then changed to a sanding drum to flatten the ends. I used my dial-caliper to check length and chucked them into my drill with a wrap of masking tape. I spun them and took off a little material at a time until the correct length was achieved.The only reason they get a 4-star instead of 5 is that they are actually oversized a bit at about 3.04mm diameter. This required chucking them into the drill again and sanding them down - very time consuming.It was an interesting experience, and I am satisfied with the results. However, for my next build, I’ll probably just order stock steel hinge-pins.
G**G
Definitely titanium
Use it as anodizing rods for aluminum and is definitely acid and anodizing resistant
A**R
Likely not grade 5, if even titanium
The media could not be loaded. I work with grade 5 titanium a lot, and what I received was certainly not it. At this thickness, there is no alloy of titanium that should bend as easily as in the video. I don't if there's some discrepancy with the sellers stock or a quality control issue, but these are certainly not strong/stiff/rigid as other reviews have stated.
B**L
Watch the ends
Minus having to clean up the ends. These are perfect
S**O
Beware - tubes, not rods
Items arrived late but the bad news was when I started to get to work on them and discovered they’re not rods but tubes - hollow inside. A clever trick and clearly advertised falsely. Buyer beware. 1 star because some score is required. Zero ideally. Waste of money.
F**D
very soft
I dont know how these could be titanium they're so much easier to bend than a steel rod of the same size. it's like putty
Trustpilot
3 weeks ago
5 days ago