SorbusWine Bottle Stemware Glass Rack, Industrial 2-Tier Wood Shelf, Wall Mounted Wine Racks with 5 Stem Glass Holders for Wine Glasses, Flutes, Mugs, Home Décor, Metal

The media could not be loaded.  One of the best items I purchased in a long time. At $40, it's a steal. Nice and sturdy. I assembled and mounted it by myself. I didn't use the anchors. The support bar goes in the front. I would definitely recommend it.

Pros:I do some bartending as a hobby, so this works great to hold most of the things I use. So far, it seems to hold the load just fine. Some s-hooks if you have them also work great on the bottoms of the side panels to hold strainers, peelers, and other gear. It also holds more bottles than I expected it would. If you have pourer spouts on your bottles, measure the total height first to be sure they’ll fit! A 750mL bottle of Bacardi with a spout only fits by being able to tilt it quite a bit first.Cons:Instructions are incredibly vague, and printed so faintly that the sheet appeared almost half blank. There was also no indication of what size hole should be pre-drilled for the included drywall anchors, which were almost 2” long and made of incredibly soft plastic. A 1/4” pre-drilled hole was STILL too small for the anchors so I used my own.The welds are also a little shoddy. None of them broke, but clearly don’t look like much attention went into them.In the side panels and the guard bar, there were a bunch of large, sharp metal flakes rattling around in them that would fall out as I was trying to assemble them??Had to bend the glass rack rails on the underside back into place, since they arrived horribly bent to the side. They’re also spaced pretty close to each other so unless your glasses have small feet to them, they likely won’t fit unless you alternate which racks you use.

I read the reviews and compared them with the reviews for similar more expensive product and forms them the same!I don’t think welds are that bad, yiu won’t even see them once it’s installed. My only concern is that there are only 3 spot weld to hold each hanging plates. Yet, I didn’t see any review saying it fell off the wall.Screws, ... were available and well fit. It was easy to assemble. You can just look at the picture and do that. Although it comes with the instructions. Rawl plugs were tricky. They don’t fit the standard drilled holes. I had to go on size bigger then glued them just to make sure they don’t move when I add the screws. It worked well. Just a heads up, installation is a two person work.Beside that the product is nice, reasonably priced and looks great.

When we removed the corner cabinets to open the kitchen up more to the rest of the house, it left a small area that we were using for small art. We'll after looking though pictures and measuring the space this rack fit perfectly. As you can see, it has had 14 bottles of wine on the wine self and can still hold more on the top without any issues. (Everything is drilled into studs). This was a great pick up for the price and I highly recommend it.

Great addition to the small bar area for this price point. So far proves to be sturdy, with what’s on it, in the picture. Did use wall anchors because it’s on the heavy side & will probably need 2 people to hang up. Will hold about 10 wine glasses. Happy with this purchase.

I scoured the internet looking for a wine glass rack that was capable of holding a bottle or two and some decorations. This one seemed to keep catching my eye. It arrived in a timely manner, was not damaged, assembled fairly easily and looks great. It is sturdy enough to hold a bottle or two, a lot of glasses and some decor. I am very pleased with the product.

Quality design and materials, holds a good amount of stuff in a nice compact package that looks great on the wall. Very easy to assemble.

Returning this ASAP. Some screws were installed, with 1 screw floating around in box. So many of the screws are missing. The black finish on all of the pieces was scratched/scuffed in many places. The part where the wine glasses hang from is very bent out of shape. Seems like someone had this one before me and returned it.

Better than expected... wanted something for crystal wine glasses and extra fancy coffee cups. Easy to assemble. Did not have to use anchors. Little tricky using a drill because of where holes are located but it looks great and suits its purpose

Looks great, sturdy, fits its purpose perfectly.But....They really should package the hex screws separately, a few were found rolling between the cracks in the shipping box.Also the support bar is on the wrong side of the instructions drawing if anyone's getting confused but it goes together just fine.

I’m very happy with the overall look of it. The material is bent in certain places (like the core of it so it was hard to install since it wasn’t completely against the wall). Once it’s up though, all is good. No problems

I don't trust this construct to hold that many bottles...Think it could have been built more solid. Then again, it wasn't super expensive... You get what you pay for I guess

Le support est beau mais les vis fournies avec sont trop grosses pour les trous. Donc, visser les vis avant l'installation au mur est impossible. De plus, les entraves sont limités, j'ai dû en acheter de plus robuste pour supporter le poids. Très déçue de ce fait.