---
product_id: 155344656
title: "Songhe 3D Printer Parts DRV8825 Stepper Motor Driver Module with Heat Sink for Ramps 1.4 StepStick A4988 (5pcs)"
brand: "songhe"
price: "818723₫"
currency: VND
in_stock: true
reviews_count: 9
url: https://www.desertcart.vn/products/155344656-songhe-3d-printer-parts-drv8825-stepper-motor-driver-module-heat
store_origin: VN
region: Vietnam
---

# Compatible with A4988 5 pcs Heat sink Songhe 3D Printer Parts DRV8825 Stepper Motor Driver Module with Heat Sink for Ramps 1.4 StepStick A4988 (5pcs)

**Brand:** songhe
**Price:** 818723₫
**Availability:** ✅ In Stock

## Summary

> 🚀 Elevate Your 3D Printing Game!

## Quick Answers

- **What is this?** Songhe 3D Printer Parts DRV8825 Stepper Motor Driver Module with Heat Sink for Ramps 1.4 StepStick A4988 (5pcs) by songhe
- **How much does it cost?** 818723₫ with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.vn](https://www.desertcart.vn/products/155344656-songhe-3d-printer-parts-drv8825-stepper-motor-driver-module-heat)

## Best For

- songhe enthusiasts

## Why This Product

- Trusted songhe brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Bulk Savings:** Get 5 modules in one package for cost-effective upgrades.
- • **Enhanced Cooling:** Equipped with heat sinks to prevent overheating during extended use.
- • **Easy Installation:** User-friendly design ensures quick setup for both beginners and pros.
- • **Precision Performance:** Achieve smooth and accurate motion control with DRV8825 technology.
- • **Versatile Compatibility:** Seamlessly integrates with Ramps 1.4 and A4988 for diverse applications.

## Overview

The Songhe 3D Printer Parts DRV8825 Stepper Motor Driver Module package includes 5 high-performance drivers with heat sinks, designed for optimal compatibility with Ramps 1.4 and A4988, ensuring efficient and reliable motion control for your 3D printing projects.

## Description

Product Introduction The DRV8825 stepper motor driver carrier board TI DRV8825 micro-bipolar stepper motor driver is a breakthrough. The module has a pinout and interface with our A4988 stepper motor driver carrier carrier is almost the same, so it can be used as a higher performance drop-down menu in which these boards are replaced in many applications. The DRV8825 has adjustable current limiting, overcurrent and overtemperature protection, and six micro resolutions (down 1/32-step). It uses 8.2 - 45 V, which can provide up to about 1.5 per phase without heatsink or forced air flow (rated up to 2.2 per pack with enough extra cooling). Features 1. Simple steps and direction control interface 2. six different steps resolution: the whole step, half step, 1/4-step1 / 8-step1 / 16-step, 1/32-step 3.CAN interface directly with 3.3 V and 5 V systems 4. Thermal shutdown over temperature, overcurrent shutdown, undervoltage lockout Short-circuit short-circuit load protection 6.4 layer 2 ounces of copper PCB, in order to improve heat dissipation 7. Bare the ground pad on the bottom of the printed circuit board below the solder IC 8. Module size, pin and interface matching A4988 stepper motor driver operators in many ways 9. Adjustable current control allows you to set a potentiometer that allows you to use the stepper motor at rated voltage above the voltage to achieve higher stepping rate output maximum current 10. Intelligent chopping control can automatically select the correct current decay mode (attenuation fast or slow decay) 11. Maximum 45 V supply voltage 12. Built-in voltage regulator (requires any external logic supply voltage) Shipping list: 5pcs DRV8825 Stepper Motor Driver 5pcs Heatsink

## Features

- Package includes: 5 pieces.

## Images

![Songhe 3D Printer Parts DRV8825 Stepper Motor Driver Module with Heat Sink for Ramps 1.4 StepStick A4988 (5pcs) - Image 1](https://m.media-amazon.com/images/I/71l+PI3eFlL.jpg)
![Songhe 3D Printer Parts DRV8825 Stepper Motor Driver Module with Heat Sink for Ramps 1.4 StepStick A4988 (5pcs) - Image 2](https://m.media-amazon.com/images/I/710791cWByL.jpg)
![Songhe 3D Printer Parts DRV8825 Stepper Motor Driver Module with Heat Sink for Ramps 1.4 StepStick A4988 (5pcs) - Image 3](https://m.media-amazon.com/images/I/61a0hgNmLSL.jpg)
![Songhe 3D Printer Parts DRV8825 Stepper Motor Driver Module with Heat Sink for Ramps 1.4 StepStick A4988 (5pcs) - Image 4](https://m.media-amazon.com/images/I/41nQpLTdENL.jpg)
![Songhe 3D Printer Parts DRV8825 Stepper Motor Driver Module with Heat Sink for Ramps 1.4 StepStick A4988 (5pcs) - Image 5](https://m.media-amazon.com/images/I/615NqXZRxkL.jpg)

## Customer Reviews

### ⭐⭐⭐⭐⭐ 







  
  
    They all worked OK.  Typical quality for this category of item.
  

*by P***O on Reviewed in the United States 🇺🇸 on June 29, 2020*

5 out of 5 were usable.  I use a lot of these, so I know that's well above average in the DOA department.  Packing is typical with several layers of bubble wrap and a soft envelope, got no bent pins this time.  Each driver had its own anti-static bag, that's a plus.if you're new to these, be sure to turn the current-set pot all the way clockwise.  Typically  these come set to mid range, which is equivalent to about 2 or more amp which will lead to a thermal shut down in a few seconds.You can consult the 'tube to find out how to set power levels the tech way.Or if you are without a meter or just pragmatic, you can power up with a motor attached and some simple Arduino program delivering pulses.  At first the motor won't move because you've set the current to 0 amps.  Turn the pot counter clockwise SLOWLY.  At some point (and it won't take much turning!) the motor will start to run.  Pinch the shaft hard with your fingers and continue increasing the current until you just barely can't stall the motor.  At that point you are likely to be at, or slightly below, the proper current rating for a middle sized NEMA 17 motor.  Touch your fingertip to the NEG power connector to discharge any static.  Gently touch your finger to the top of the chip...it should feel a little warm, but not hot!  If it's hot, reduce the current until you find some sweet spot balancing heat and motor performance.Best practice calls for using a heat sink, the ones that come with this kit are (typical of all kits on Amazon)  kinda small, but better than nothing.  The kit ones will let you set current about 0.1 amp higher than without.  If you're really ambitious, but some tall heatsinks, sand of the anodize off the contact surface of the sinks to expose bare aluminum, and glue the sink to the chip with Arctic Alumina Thermal Adhesive, which is actually a two-part epoxy.  It sets fully in about 15 minutes.  That will let these drivers max out close to 1.9 or 2.0 amps without thermal shutdown, which is very impressive.  And it will prevent the heatsink from shifting position which can happen with the spongy, peel off adhesive pads that come with the sinks.  It just takes a tiny dab, grain of rice size or even smaller.  A tiny dab will do ya, gramps.  That stuff works really good, and although expensive one kit will do a LOT of heatsinks, so call all your friends for an upgrade party... wear masks please.PS, sometimes when adjusting current the driver will do a thermal shutdown.  Don't despair, and don't toss it.  Turn everything off, give it a 5 minute rest, and it's good as new.PS, it is not entirely an old-wives tail that powering up these drivers without a motor attached will kill them.  Be safe and don't tempt fate.  And be darned sure you've got these things plugged in with the right orientation, the old 180 degree error is all too easy.

### ⭐⭐⭐⭐ 







  
  
    Works great, bit hard to calibrate
  

*by C***. on Reviewed in the United States 🇺🇸 on July 31, 2022*

Those are the real deal and work well. Packaging is a bit confusing since mine said A4988 on the bag, but the components were DRV8825s. The calibration screw is pretty sensitive and it can be hard to hit the current limit for 0.4A motors

### ⭐⭐⭐ 







  
  
    Burn out very quickly.
  

*by D***L on Reviewed in the United States 🇺🇸 on January 29, 2022*

I've tried all 5 drivers in the pack I got, 4 burned out very quickly, at any current setting, the 5th never worked at all. The heatsink gets hot almost as soon as you connect the power supply. One out of 5 has a defective potentiometer. Another, out of the box, has only 2 Ohms resistance between positive and negative voltage input. You can still adjust the current, but the end points have broken, so you never really know where you are. I've checked with an expert in how to wire these, we set the current super low, hardly any holding torque on the motor at all as a result. Yet, best we got was a few minutes of action before the thing was burned out. At least for me, they don't work.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.vn/products/155344656-songhe-3d-printer-parts-drv8825-stepper-motor-driver-module-heat](https://www.desertcart.vn/products/155344656-songhe-3d-printer-parts-drv8825-stepper-motor-driver-module-heat)

---

*Product available on Desertcart Vietnam*
*Store origin: VN*
*Last updated: 2026-03-24*