Passenger Right Side Replacement Mirror Glass Compatible with Chevy C or K Series, Tahoe, Sierra, Yukon

Right shape for my 95 Suburban, but it was just a bit too tall to fit within the ride that goes around the plastic mounting plate. Used blobs of silicone between the provided foam adhesive discs, and fit the top into the lip but let the bottom sit on top of the lip; the mounting tape was plenty enough to hold it there, and when the silicone cures it should be on there for good. Optics are good. If I was really picky I could've ground off the bottom lip of the mounting plate and it would've sat flat on the plate. As it is, it looks factory, works fine, and can't complain about the price.

While this product was not an 'exact' fit, it worked well enough that my wife did not even know that I replaced the shattered one with this. I did have to use silicone on the back as I thought the double sided foam would cause shaking issues. A little silicone and done.the fit issue is that it is a little bit bigger than the 'tray' that the original glass fit into. I have a 1997 K1500 and this glass was about 1/8" to wide left-to-right. The right side sat on the 'tray' for the original glass.

Good fit. Works as well as a factory new mirror.I did not use the included adhesive pads , (if you do and don't have the mirror perfectly lined up with the backing plate, you have a problem). I just used 8 dabs of silicon and held the mirror in place with rubber bands overnight. I've used silicon with other mirrors and never had one fall off.

the glass is exactly the same as the old broken mirror it replaced. on my 1999 suburban the old mirror was wired to defrost and I didn't want to or need to spend the extra to but the heated replacement glass. I just removed the old glass and unplugged the power supply, cleaned the surface and placed the new glass in its place.

Installed 4 months ago. Not sure if heat function works (unclear if switch or wires for heated mirrors on *my* truck are are working correctly) but the red light-up arrows on mirror work great with my turn signals.Clear, normal, stable image on highway at 85mph, and no rattling over bad city potholes.

Easy to install and they have worked well. I used the supplied adhesive pads and installation went well. But, you better make sure that the mirror is where you want it, because once it touches the pads it's NOT moving again. It has been on the vehicle for three months now and has gone though high heat and car washes without a problem

I have a 99 Suburban with power, heated, auto-dimming mirrors. This was not an exact fit replacement but I was able to make it work for now - I had to remove the old glass from the plastic backing and use the adhesive disks to secure this replacement to that plastic backing. This glass is not exactly the same size and shape as the plastic backing so be careful how you place the replacement glass or the power movement may bind. My power movement still works but this is not heated glass and it cannot auto dim. This is temporary fix for now until I can afford the towing mirrors I want to put on

Perfect fit, good quality & easy to install. I would put additional heavy lines of silicone if you drive on dirt roads.