🔧 Connect with Confidence: Elevate Your RF Game!
The Boobrie UHF Connector is a high-quality right angle coax connector designed for seamless connectivity between UHF male and female devices. Made from pure copper and featuring a nickel-plated surface, this low-loss adapter ensures optimal performance in various RF applications. With a 90-degree design for space efficiency and a lifespan of over 1000 mating cycles, this pack of 2 connectors is perfect for professionals seeking reliability and versatility in their setups.
R**T
Seem to work good
Same to work okay
J**3
worth the price
Will be used on my HF station gear , seems to be a well made. Tested continuity was ok, tested resistance got a zero reading at 20ohm and 2000 ohm settings. Pins in center were centered correctly as was the female receptor, not like others reported loose pins. Haven't tested with any power through them yet but I only run 100 watts max. Looks like they'll be able to work out without deforming the insulators. I cant tell if these were a pressure fit center conductors or if it was soldered prior to encasing it in the housing, but it tested out ok. I would advise checking a few times after running them with low to average power to assure it doesn't develop an open condition due to that fact. I'm doubtful it could handle over 200 watts not knowing the construction design, and specs were posted.
A**R
SO239 is not deep enough to engage PL259 fully.
SO239 is not deep enough to engage a PL259 fully. I don’t know if this is normal on these 90 degree connectors? Otherwise I like it and fit/finish is good If your willing to clip 2mm off the tip off your pl259 it will work nicely
A**R
Works great
I used this to get around a tight spot in my vehicle. Seems to be of good quality.
A**R
Worked great
This worked great for the application I needed it for.
G**Y
No detectable loss.
After running LMR-400 coax to my antenna needed this 90° adapter to connect to my transceiver. The coax is very rigid and I did not want to risk a tight bend. The adapter is well built and I did not notice any increase in SWR.
C**H
Great for GMRS
Fits perfectly on my GMRS unit to help with cable management, and you get 2 of them so I have a backup
J**T
Was just what I was looking for.
Needed to make two 90 degree turns out of the back of a two-way radio
T**Y
Defective
I installed these on my coax. The SWR was off the scale. I tried matching the antenna but it didn't help. Took these off and the SWR is perfect. I took these out and then installed 1 at a time and the SWR was still high so I can only deduce that both of these are defective.
P**A
functionality
On the side where you suppose to attach the cable the depth of hole is to shallow. I had to file the Pl 239 cable pin little bit so the outer shell could touch "cogged" casing
A**E
Excellent
Aucun problème, #1
R**N
ok
ok
Trustpilot
1 week ago
4 days ago
