Brushless 24V DC Blower Fan, 120mm (120×120×32mm) Dual Ball Bearings High Speed Air Exhaust Vent Cooling Radial Centrifugal Flow Blower with 2 Pin Plug, Light Weight

Description

Product description UTUO Centrifugal Brushless Dual Ball Bearing Blower Fan is made cooling and ventilating solution with long life expectancy. Dual Ball Bearings design, PBT+GF housing and blade ensures a wide operation temperature ranged from -10℃ to +70℃. Small size and Light weight but can generate a decent air flow output. RATED AND OPERATING CONDITLONS Rated voltage(VDC): 24V | Rated current(A): 0.40A | Rated input power(W): 9.6W | Rated Speed(RPM/Min): 3000±10％ Startup voltage(VDC): 17V | Operating voltage(VDC): 21.6-36.4V | Operating temperature(℃): -10℃-+70℃ AIR FLOW-AIR PRESSURE CHARACTERISTIC Applicable conditions: Shall be applied in the state when the standard, environmental conditions and voltage are fixed. Max. Air Flow: 45.40CFM Max. Static Pressure: 35.70mm-H2O Max. Noise: 65.10 dB-A STRUCTURE AND FORM Bearing: Dual Ball Bearing | Structure: Cross flow fan Housing: PBT+GF30% | Blade: PBT+GF15% Dimension: 120x120x32mm | Screw Hole Spacing: 104.5 mm±0.5 | Weight: 202g Connector: XH2.5-2P | Cable Length: 20cm (8 inches) ELECTRICAL PROTECTION Locked Rotor Protection: Auto Power off after Locked at Rated Voltage for 1 sec. And Then Circuit Attempt to Restart in 2 to 6 Sec. Polarity Protection: Open Circuit when Vcc &GND are Exchanged Circuit Won't be burned within 5 sec. when Vcc &GND are exchanged. Insulation Resistance: At least 10MΩ at 500 VDC between Housing and Both Lead Wires. Electric Strength: Withstand 500 VAC 1 minute 1mA between Housing and Both Lead Wires