3.5 inch Touch Screen with Case

Wanted to get away from a dedicated monitor. It works as advertised. It would be nice if the display was supported by 4 corners instead of 3.

Used for a pihole, took some manual tweaking to get the font right. In the GUI mode the bottoms of windows were cut off and it was not very useful, I did not mess with it because I had no plans on using it that way.

To use my Raspberry Pi in the car, I needed a compact housing with a display. It's easy to assemble, everything is ok.

Gracias a esta basura de pantalla se han quemado dos de mis raspberry pi 3 B+. No inviertan en esta asquerosa pantalla

Install instructions were clear and worked inside of an hour

Got it yesterday, still not working, looks nice. There is no manual; the little quick start paper just mention one command for Linux but not for Windows 10 IoT Core. So, how can this be user friendly for experiments? Also, their is literally no hint how to connect the HDMI monitor in addition as promised. How to do this? You can't keep your customer alone with such a poor documentation

Guia de instalación

So many bugs after installing their provided drivers, which are necessary to run the screen. Had to reformat my microsd afterward, as their drivers could not be uninstalled.

This product exactly as described. It came very well packed with each component in its own static bag.There is more info on the CD than I expected including enough to do way more with the product than I expected. The CD contains files for learning how to create various projects with the Arduino board as well as how to program it. I bought this package as my first foray into the 3D Printing world and have very little electronics experience beyond assembling prepared kits. The files on this CD opened up my mind to the versatility of this board.I have tested all of the components and everything is functioning perfectly. I also had a mishap where there were vibrations that caused my entire project to fall off od the table (purely my own fault) and everything continues to work even after the fall. Very sturdy. I am very happy with this kit.

Problems resolved -- (see Oct. 4 final update). Now giving a 4 star rating and we DO recommend this product.There was a problem, but the vendor reached-out and corrected it. Thank you.Original review:Good value, but RAMPS board is very poor quality compared to others that we have purchased. The solder flux used on these boards has left corrosion all over the metal pins and connectors. Blue screw terminals are very poor quality.Recommend: spend a little more for a higher quality board.Update Sept 2018:On first power-up, it became apparent that there were more than cosmetic issues. RAMPS board was defective. Returned.Update Sep.27, 2018:Received excellent follow-up from seller. Replacement on the way. Will provide final update when it arrives. Added another star...Update October 4, 2018.Replacement arrived. Quality very good. Now 4/5 star rating. Thank you Kuman.

The cost is unimaginable to incorporate a full showcase and everything works (up until this point, I've tried the LCD, fan, radiator, thermistor, and 4 engine drivers (X,Y,Z,E)). Notwithstanding, the fit and complete on these sheets is garbage. You truly need to stick the driver loads up in (my trap was to place them in the meantime and push them down together). A considerable measure of the weld veil is secured by the parts - so you need to reference the official RAMPS pictures to really comprehend what goes where.I'm utilizing Marlin firmware. It stacked up fine and dandy. A few pointers: To utilize this LCD, you need to uncomment "REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER" choice in the arrange document - at that point it should "simply work". My most loved approach to utilize the LCD is to do the bed work leveling. Essentially, the printer will make up for any uneveness in the table tallness. To utilize it, you need to uncomment "MESH_BED_LEVELING" and "LCD_BED_LEVELING" in the arrange document.Likewise important, the guidelines have some odd remark about controlling the arduino and the RAMPs in the meantime. To the extent I can advise, it's fine to have the Arduino connected to the USB while offering 12v to the RAMP board. You simply would prefer not to utilize any of the other Arduino control choices (e.g. the barrel connector, vcc stick, and so on.) for the Arduino when the incline is connected. Albeit another client has recommended the RAMPS ought not be associated with the Arduino when you first blaze the Arduino.Conclusion:This kit offers incredible quality at such a low price allowing you to create a 3D printer in under $60!

Really bad quality boards, soldering is litterally all over the place. 1st one did not work, seller was nice enough to send a 2nd one, quality was as bad as the first one. Returned for refund.

Exactly as advertised. Fast delivery. Quite pleased with quality and reliability. Used this to convert my K40 laser cutter to run on Marlin. Works excellent. Cant beleive Kuman can offer all of this at such a low cost. Highly recommended ! Will buy mire ...