Stromberg CarlsonLG-183708 Manual Landing Gear System for 5th Wheel Trailers & RVs – 4,000 lb Dynamic Load Capacity per Leg, Trailer Landing Gear Crank Handle Included - Black

The crossbars we're way too short for my toy hauler, so had to use the old bars which were still good. The mount points for these legs were not in the correct spot so I had to weld a new plate to make the stops lower, which let's the crossbar clear my propane tanks. These work like my old ones except are new so it's less work on the motor.Came with new metal motor mount, nice upgrade from the break prone plastic one.

Fit like OEM on my 2006 Forest River Wildcat 5th wheel. These are 29.5'' length. The lead leg got stuck in the down position and the local RV shop wanted $260 just for that one leg and nothing else. I figured for $381 to my door for both legs and the gear box, I'd just replace everything because my gear box seemed pretty worn out too as it had a good amount of play. Install is pretty easy, anyone with simple hand tools and basic mechanical skills can do it. I used a bottle jack on the frame and replaced 1 leg at a time. The only issue I came across was the hole in the cross bar was drilled a little too far in so it wouldn't allow the bolt to go through on the lead leg side. All I did was get a drill bit and enlarge the hole a bit and with a little persuasion got the bolt through. Easy fix. I also bought new pull pins so that everything was new. I definitely recommend this set if you need to replace your landing gear.

The drive shaft between the legs was too short for my camper, fortunately I was able to reuse the original and make it work.

I just installed this purchase today on my '04 Forrest River (Cardinal) fifth wheel. Once I viewed some of the steps to take on YouTube, the replacement went smoothly. I was impressed with the construction of this product. Unlike the original, this product has Zerk fittings for maintenance and it came with a new crank handle, which is not listed in the product description. My electric motor matched the gearbox perfectly and all the hardware provided includes washers and lock nuts for peace-of-mind. Shipping took only two days and is free with Amazon Prime. Stromberg Carlson has won my approval as a high quality manufacturer at the best price.

This landing gear was purchased to replace an old broken landing gear. The weld on brackets were in place & close enough to be able to simply install the new gear. I will add a power unit to the installation as the hand crank works well, but is rather slow

Product is good just cant use it with out the feet,also instructions are torn and mangle to point they are useless.

Installed on a 2008 Keystone Montana. Very easy install while hitched on my truck. I had to grind a very little on bottom stop to fit between the stops but saved alot of $$ install took 1 1/2 hours.

Seems like it would be a great product if it weren’t missing parts and one of the spindles being bent.

Easy to install and fit perfect to replace original landing gear on 1992 Skyline Aljo.

It worked well for my camper. Just had to abit of work to attach it.

Shipping was very fast...item exactly as shown...priced very well

Installed in minutes. I was replacing a broken leg so didn't need all the parts, which was a good thing. Caps and leg bottoms along with one of the cross bars were missing.