Xitomer Fender Eliminator Fit For YZF-R25 2014-2024 YZF R3 MT-25 MT-03 2015-2025 Fender Eliminator kits Tail Tidy with Led License Plate Light

Easy install, instructions easy to follow. Unbeatable mod for the price, can’t believe the build quality, even came with stickers and a key chain AND all the proper hardware and cleanup equipment needed. 150% recommend, is a no brainer considering comps sell at $250+

Worked perfectly on my 2025 R3. Works with stock rear signal just gotta shave off the inner circle part

super nice quality and sleek design. Fit my 2024 Yamaha R3 perfectly. Very self explanatory and comes with everything you need. I do want to mention the LED light it comes with sits at an odd angle on the plate. It is sitting up a bit being a tad bright for drivers behind you. I had to bend mine up a bit due to my bike being lowered a bit. Aside from that it looks great compared to before. Thanks!

This is a nice fender eliminator, it is not an exact fit and some of the wiring connectors are not exactly plug and play for the light on the plate. It is very easy to get connectors to make it fit and they give plenty of wiring on the light to make it work within the plastic fender for your connections. The hardware is by default nickel plated finish/ chrome look, so if you want it black, just paint the hardware first and then install. It sticks out towards the rear for a visible read, if you are looking for on that is super tucked away in the bottom/ back of the fender, this one is not for you. Overall a pretty simple installation.

This fit my 2025 Yamaha R3 fairly well i did have to enlargen the holes a little bit as the clips did not fit through other than that it has been a great vale for money and good quality.

The license plate holes don't sign with the plate brackets can mount either bottom or top bolts not both. Upon mounting the plate also covers up the hole where the white led illuminator is supposed to mount soo I drilled into my plate and bolted it on instead. The plate itself is a bit too slanted I bent it more straight and the blinker mounts needed adjusted. The file they give is terrible to do the blinker mounts luckily I had a very tiny wire cutter that fit otherwise you're going to be pissed hand filing through everything. Said and done it does look pretty good it's compact and gets the job done.

Great item to get for your bike. I have the 2025 r3 and the OEM blinkers fit great. Only thing i had to do was open up the hole for the blinker wire harness to go through to the inside of the bike for this product. The square was maybe an 8th of a inche to small but not a hard fix. (For OEM blinkers) The plate light is bright and isnt hard to hook up. I will say this if your using the OEM blinkers you will have to pop the tab out but it gives you a tool to use so just keep an eye out fot that.

Confirmed on a 2025 MT03. Protip if you want a cleaner install, you can route the wires thru the closer smaller square hole by de pinning the connectors. Just search for how to depin a Sumitomo connector on yt for the turn signals. For the plate light, its a different connector but easier to depin by pressing a small tab if you want to try to finagle the oem plate light otherwise I just cut and soldered the kit light to keep the connectors. To do this tho you'll need to space out the tail tidy so some spacers between the tidy and the body does the trick easily. If you want black bolts they are M6 bolts. I used 20mm/25mm but could prob get away with 20/20 or maybe even 15/15 so it doesnt stick too far up inside blocking the ECU. Not the fanciest kit but clean enough for what it is and the price.