BOSCH 15718 Premium Original Equipment Oxygen Sensor - Compatible with Select 1989-16 Ford, Jaguar, Lincoln, Mazda, Mercury

Why did you pick this product vs others?: bosch quality Engine performance: Fixed my sensor issues Sensor quality: Plug and play sensor Ease of installation: Easy to install

Vehicle: 99 Mazda B2500 basically a ford ranger. Install was per normal, fight this, twist that. All done, fire it up, watch O2sens signal on scan tool, whadya know, we got a good signal now. Good connector fit, does it's job.

Works on 99-04 Mustang GT So far 100 miles and got rid of my check engine, and car runs smoother, for the price I replaced all 4!

I bought 2 of these and they threw rich codes. Replaced them with Motorcraft and problem was solved... I missed the return window by 1 day.

Works for the Mustang 5.0. Good product, works like it should. Best price for a good O2 sensor. I would recommend.

This part was listed by Amazon as a fit for my 2013 Ford Explorer Limited. This is not correct. Part returned.

I have always had great results with Bosch 02 sensors. Cheap brands tend to fail after such a short time. I purchased these(15718 & 15717) for my 1997 Ford Explorer 4.0 SOHC ~6yrs ago. They have been trouble free since. While I no longer own the vehicle, I know who does and they have not replaced them ~80kmi later. Bosch supplies a small tube of copper anti-seize with each sensor as well. Bosch reverse engineers all of their sensors based directly off OEM specs. They also test every sensor and use premium components for a very low failure rate. Best of all...MADE IN USA!! I highly recommend buying these. I liked this small excerpt their site: "One of the largest Bosch oxygen sensor factories is located in the U.S. in Anderson, South Carolina. We have been producing O2 sensors here since 1991 and we currently produce 15+ million sensors annually. Our O2 sensor reverse engineering team is located within this OE facility and is solely dedicated to serve the aftermarket division of Bosch. For oxygen sensors where we are not the OE supplier, we will reverse engineer the sensors and produce them on exactly the same production lines as our OE oxygen sensors. No other O2 sensor manufacturer has this unique capability. Between our OE O2 sensors and our reverse engineered sensors roughly 90% of our annual sales get produced on Bosch OE production lines."

My Check engine light came on and when I scanned it with my scan tool I got code P0307 and P0420. I figured it had to be the O2 sensor. I called the dealer and they quoted me a price of over $140 for both sensors, I went to the local autozone and the price there was $43.99 plus tax for Part Number: 15717 Down-stream sensor and $46.99 plus tax for Part Number: 15718 Up-stream sensor Up-stream sensor. A grand total after tax of close to $100. I searched on my phone and found that Amazon had both for a combined cost of $60 plus free prime shipping. After I install these sensors my check engine light went away. These are direct fit for the Expedition, so there is no cut or splicing of wires required. P0307 A code P0307 may mean that one or more of the following has happened: 1 Faulty spark plug or wire 2 Faulty coil (pack) 3 Faulty oxygen sensor(s) 4 Faulty fuel injector 5 Burned exhaust valve 6 Faulty catalytic converter(s) 7 Running out of fuel 8 Poor compression 9 Defective computer P0420 1 A code P0420 may mean that one or more of the following has happened: 2 Leaded fuel was used where unleaded was called for 3 A damaged or failed oxygen sensor (HO2S) 4 Downstream oxygen sensor (HO2S) wiring damaged or connected improperly 5 The engine coolant temperature sensor is not working properly 6 Damaged or leaking exhaust manifold / catalytic converter / muffler / exhaust pipe 7 Retarded spark timing 8 The oxygen sensors in front and behind the converter are reporting too similar of readings 9 Leaking fuel injector or high fuel pressure 10 Cylinder misfire 11 Oil contamination

The Bosch 15718 Oxygen Sensor is a top-quality component that delivers exceptional performance and accurate readings. Designed with OE type fitment, this sensor is a perfect replacement for your vehicle's original oxygen sensor. It effectively measures the oxygen levels in the exhaust gases, providing vital information to the engine control unit for optimal fuel efficiency and emission control. The sensor features a premium design with a durable construction that ensures long-lasting durability and reliable operation. With its quick response time and precise readings, the Bosch 15718 Oxygen Sensor helps maintain the performance of your vehicle's engine, reduce harmful emissions, and improve fuel economy. Whether you're a professional mechanic or a DIY enthusiast, this oxygen sensor is a trusted choice that guarantees a seamless fit and excellent performance.

Bien

the sensor arrived on time with no transit damage. it looks different from the original factory unit but works just as well.

La descripción del producto es engañosa. Solo se envió 1 sensor cuando la descripción dice claramente 2 unidades.

Great price and fast shipping.