Phanteks Enthoo Luxe 2 Full Tower Noir

Great case with lots of room and space for future upgrades , it’s a perfect case for water cooling or normal air cooling , the front io has 4 USB ports just make sure whenever you are buying a motherboard for this case that it has 2 usb blue ports to go into the motherboard or else you’ll be left with just 2 USB ports at the front of the case overall great case it comes with all the screw and extra tool out from the box that’s a giant plus for anyone looking to upgrade down the line i currently have a rtx 2080ti installed , 16gb of dominator ddr4 ram , the motherboard of choice is Asus z390e , 2 tbs of WD black performance drive and a Samsung 970evo ssd for cooling I have 3 Corsair ml140mm cans at the front one Corsair ml140mm at the bottom , 140mm at the rear and I have a Asus 360mm liquid cooled cpu cooler at the top of the case for power I went for the Corsair 1000w psu for future upgrades overall it’s a great and massive case best purchase so far would highly recommend this case to anyone looking for a lot of space or for cooling , the case might be a bit expensive but it’s worth the money the build quality is great and the packaging is fantastic have no problem with the case so far

Holy mother on a pogo stick, when i ordered this case, i was expecting a Big case... when the box turned up and i took it, i think i had underestimated just how big this really was. I was able to sit in the box it came in! And I'm not a small girl!!So i dutifully moved all my poor pc parts into this case, set up the cooling and then realised that my cooling was completely useless in this case and i needed something better. Cue, new cooler and new 140mm fans. My pc now makes me cold so i have to wrap up in a blanket when i play but at least my pc has no chance of overheating.My back however is not grateful, this case weighs a damn ton and that's before you put your parts in it. It does have look great. I wish i was able to hook the leds up to my motherboard but that's a compatibility issue between drgb and argb.So if your looking for a monster case that you run 2, yes 2 motherboards in, this case is your ticket. Or as in my case, one monster gaming rig (^.^) grab this, you'll be glad you did as it uas enough space to fit everything!!

The engineering and design in this case is a what i would put in super tier its incredible how they made a case like this just no word besides perfect can describe it and the box and packaging it came in ... it would make Linus super happy

Probably top 3 cases in the market. Big, spacious with lots of room for airflow and cable management.

I bought this case to fit in my big Monsta 480mm rad and discovered, that yes the case does fit large rads, it does so in a way that intereferes with the other radiator settings. A large 480 at from with fans will block off the bottom and top 360mm rad support.As of now there's enough on the interwebs with rad support limitation.That's the bad.. the good. Case is gorgeous and solidly made. Comes with Phanteks fan hub controller to help with all the radiator and case fans you will have.The flap covered front mount io I'm not a fan of personally, and i wish they had done more of a mesh front like the cheaper and to all purposes a fanhubless enthoo pro 2. I ended up modding my front to allow me 2 480 rads in front and side mounted positions.TLDR good case. Love the size, nice airflow, just wish they hadn't tried to squeeze the rad fittings.Nice rgb, but tbh if i could do over. I would have bought the pro 2 or

Still to build in this case as so far only have the case and the CPU! I've unpacked this and there's a lot that phanteks gets right. It's been a while since I've had a full size tower and yes it's big. All the accessories are nicely packed and love the included plastic case containing all the screws, doesn't cost much to provide but shows they go that little extra. Everything looks good so far but will update when I've got the system built.

Great case for dual system, and great price to

Its big, very big. Disappointed with the rad support - although it can theoretically take front/top/bottom/side rads, in practise using more than 2 rads seriously limits rad thickness choice and fan support (especially without getting the Dremel out).The chassis is good for the price but its not the sturdiest feeling box out there.With more thought the rad support couldve been the best out there at an incredible price, sadly its not like so many other cases; I really dont see how its so difficult to make a case that genuinely supports 3 or 4 rads without major compromises.

Con esta caja espero no tener que comprar ninguna otra más en la vida, es muy espaciosa jamás pensé que tendría que necesitar algo tan grande pero las nuevas gráficas lo demandan , me gusta la capacidad de poder colocar 12 hdd por eso la compré y estéticamente es bonita. También va sobrada en espacio para ventiladores. Ahora no se lleva el espacio para el lector de dvd pero creo que en eso falla, teniendo tanto sitio podrían haber dado esa opción.

Avesse avuto qualche centimetro in più sulla parte alta... mi spiego peggio :) se tra la scheda madre e le ventole superiori ci fosse stato un po' di spazio in più si sarebbe raggiunta "quasi" la perfezione (nessuno è perfetto) ho avuto difficoltà a ri-collegare i 12v della cpu (che guarda caso sono in alto su quasi tutte le schede madri) ma anche per le ventole della cpu... per farla breve tutto quello che si trova in estrema periferia in alto della scheda madre risulta poco o addirittura per nulla accessibile... spesso conviene smontare e rimontare (scheda madre o ventole superiori)... che non è proprio il massimo della comodità. Concludendo è un signor Case e consiglio di comprarlo se volete un case capiente che farà invidia a chiunque dei tuoi amici gamers lo guardi ma nella speranza che il produttore legga questa recensione e che migliori qualcosa ho scritto questa recensione. Ne ho uno e dovrei fare un server (senza luci e molto serio) e sicuramente faccio il bis.

J’ai reçu colis mais rien de casser et bonne qualité merci à refaire

Ein echt schön großes Gehäuse was Mega viel Platz bietet und auch das Kabelmenegment ist sehr großzügig gemacht worden und man kann seine Träume im PC Bau ausleben da der Innenraum den Platz und viele Anschlussmöglichkeiten bietet ich empfehledieses Gehäuse echt weiterZum guten Schluss auch das Design von außen und innen schön DezentUnd ich möchte noch hinzufügen das Gehäuse ist für ein duales System ausgelegt daher exestieren zwei USB 3.0 Anschlüsse kann aber auch wie bei mir mit nur einem System betrieben werden

Theres plenty of rigs to get, you dont need this but if you want something permanent, or long lasting, get this. I bought something I thought was reasonable 5 yrs ago and now here I was getting this due to lack of room and space for rads. Futureproof yourself and buy this. Its quality is good, comes with loads of parts, good strong mounting, variability, and customization options. Custom fan placement, meaning you can adjust fan position because theres no screw holes, theyre long stips so you can slide em' to your preference. And even tho PSU is buried in a separate casing, you can still see the RGB fan (If you have a PSU like that) from the outside on the back, in combo with the other 4 fans you can optionally mount on side which can be seen from other side of case, it looks good. Also the other 13 fan spots. lol. Its a good case with room, looks, it has extra parts, comes with tools, wiring is good and has Velcro strips AAAAALL along the back and zip ties. This is very good.