BedRug Jeep Kit - BedTred BTJK07F2 fits 07-10 JK 2DR FRONT 3PC FLOOR KIT (INCLUDES HEAT SHIELDS)

Ok, I really wanted to like this stuff, but some questionable fit problems made this a miserable experience. I have a 2012 wrangler sport (2 door). I checked the part number, and I have the one that they say I need (BTJK07F2). Ninety-nine percent of the problems are with the back seat, which is so bad, that I stopped and turned on the computer to double check that I had the right part. Funny how the pictures on amazon (and elsewhere, including 2 Utube videos) don’t show the back seat for the 2 door.First the good. I like the look and feel of the BedTred. When it fits, it looks great. The front sections fit great and look good with the exception of some oversized and off center holes for where the seat mounts. Luckily, my Jeep is black, so you have to look to see the faulty fit in this area. A couple of inches more material in this area and the fit would have been perfect. The most noticeable hole for the seat mount (front outboard) fits just about perfect, it’s only the inboard (on both sides) that is poorly done. So I’ll say I’m happy with the front.I was feeling pretty good about this point, but the back seat area is a complete fail. Going to try to put in some pictures. First of all, I tried moving the cargo cover further forward, it won’t help. The backseat does not even come close to fitting. I really wanted to return it at this point, that’s how bad it is, but I already gave away my carpet, so what would I do with a refund? Nobody else makes this kind of stuff, and the fronts are in and look good. So I patched it up and just left it. Ugly.You see, the back section is just way too small in the footwell area. If I move the holes for the back seat mounts to where they fit, I have a MASSIVE overlap that won’t even fit under the seat, and a MASSIVE hole between where the back section ends and the rear seat section starts. Note that I bought the matching cargo area BedTred and installed it as well (BTJK11R2). Maybe if you still had the factory carpet there, but who would do that, except perhaps to save money?So, I pushed the BedTred stuff back until it met the cargo area mat (I have the back section it up as far as it will go, and it lines up with the sides, which can’t be moved, so I know I did it right). Now, I have these huge holes (cut for the rear mounts of the front seats) right in the middle of the floor. I cursed, pulled, adjusted, readjusted, showed it to my neighbor, etc. There is just no way this stuff will correctly fit. Either you have big holes for the improperly placed seat mounts showing, or you have a gap where it meets the back, one or the other. And if you chose to line up the seat mounting holes, you will have to cut several inches off the BedTred before you can jam it under the seat. Even with my holes being way further back from the seat, I still have an overlap with the front sections.Bottom line, the back seat will not properly fit a 2012 wrangler. Either I got the wrong part (and amazon messed up) or the product is unforgivably bad fitting. Well, I took some BedTred left over from my rear section (see that review BTJK11R2 to see where it came from) and made some patches. As you can see in the pictures it looks like #@!%.Can I recommend this stuff? Well, if you want this type of floor, sadly BedTred is the only game in town that I have found. So, how bad to you want to replace your carpet? I go in the mud, so for me, I guess it’s a go. Too bad BedTred didn’t tie up the loose ends better. This could be a great product with some adjustments to the rear seat area. Maybe if you never look in the back seat?Note: If anyone from BedTred sees this review, I would love to hear what you have to say. Unless it’s “you were sent the wrong stuff from Amazon, we will send you the right stuff”, then I would need some sort of proof that ANYONE can install this stuff and make it look good. Now I know why a search of the internet failed to provide ONE single picture of the rear seat area of a 2 door installed. I attached 4 pics. One showing the hole in the front seat area, one with the unforgivable bad rear seat fit, and one with the ugly finished results in the rear seat area. I give it 0 stars in the back seat and 4 in the front rounded to 2.

Everything is just a little bit off and it makes the liner look terrible. You're better off spending the extra money to get a real liner put in. That being said, I should've expected this from a pre-fab product.

Didn’t fit right and company refused a refund. There were gaps and wasn’t tight. Didn’t fit right around console and seats and not enough places to attach. Also moves. Disappointed for a product that is so expensive. Should have just got the real thing.

NOT CLOSE TO FITTING. HOLES CUT WAY OFF, TOO SHORT ON BACK SIDE OF SEAT. CALLED COMPANY ABOUT ISSUE AND EVEN SENT PICTURES. THEY TRY SAYING THERE WAS NO ISSUE OR MAYBE IT WAS INSTALLED WRONG. FOR SURE WOULD NOT RECOMMEND TO ANYBODY. WHAT I HAVE NOW IS A 240.00 PAIR OF FLOOR MATS. THAT DOES NOT EVEN COVER THE WHOLE FLOOR. NICE.

Install was really not that bad and sits and looks awesome. Looks like I bought a brand new floor 👍👍👍

Loved the quality and fit

Looks great! Durable yet soft... perfect to replace your carpet with... a no brainer to me!! Love, love, love it!

Great product. Fit perfectly. Very pleased with my purchase.