Universal Drawer Slide Jig - Cabinet Hardware Jig Install Drawer Slides Quickly, Accurately - Hardware Installation w/Locking Wedge to Secure Cabinet Slide - Adjustable Woodworking Tools

Easy to install glider rollers keeps them level for installation, great price ,good quality, very accurate installation

Used this for the first time today installing 4 sets of ball bearing side mount drawer slides in a shop cabinet. I'm a new woodworker and this was my first time installing drawer slides. The cabinet was unusual in that there was no bottom to reference off of in the usual way of cutting a scrap to act as a spacer under the slides (and the floor was no where near level) but with the way this jig works you can reference off just about anything within reach of the indexing foot. Once you have things aligned on your first slide you can clamp the jig in place and then extend the foot to your reference surface and lock it in place with the locking screw. Once everything is locked in and clamped down you can pre-drill holes, and insert screws as needed without a need to hold the jig in place. Clamping is not absolutely necessary but makes it easier to do other tasks and not have to worry about the jig slipping out of position. Once you have the first slide installed you can easily move the jig to the next drawer position and if it is a drawer level with the previous one you can use the foot as your alignment guide which makes it very quick to install multiple drawers in a row. The jig is well built and I have no reason to believe it won't last a very long time given it's somewhat limited use. The only drawback is the price given it's fairly limited use... but it does what it does very well and to me its Worth the money for the time it saves and it's flexibility to work for various different installation scenarios.

Good product and well-designed. Works well but would be nice if it had some texture to prevent sliding and a bubble to establish level. It will do well for installing drawer slides.

This is the ticket to easy drawer installation. The Rockler Universal Drawer Slide Jig works perfectly. I have made many cabinets through the years including a whole set of kitchen cabinets. I never got around to getting or making a jig until now. I will never be without the Rockler when putting in drawers. My time was likely cut at least in half and no hassle at all. All it takes is one hand on the jig, which holds the slide securely, and the other with the drill. It couldn't be easier and the price is great. I highly recommend this Rockler Jig.

I'd give it 10 stars if I could. Used to install self closing side mounts on 16 drawers. Previously had tried the Kreg and by guess and by golly. Kreg was worthless, by guess took forever and was just so so. Side mounts are very finicky - at least the ones I got from HD. With the Rockler it didn't take long and they worked very well. If you read the reviews of the side mounts on HD website lots of complaints. I get it - if not installed perfectly they don't work. Well with the Rockler they get installed perfectly. Sorry if this sounds like an infomercial; normally I am issuing 1 star reviews, but this thing made it easy with no crawling into the cupboards and standing on my head!!

I purchased the drawer slide jig to install a repaired drawer with new slides. After I installed the reinforced framing, I discovered that the other brand jig that I had purchased, would not work due to the shape. I purchased the Rockler jig wishing that it cost less, but decided that it was worth it if it saved time. The package that came was a bit damaged, but the jig was okay. I purchased a full extension drawer slide, so the longest part of installing the slide was getting things situated. Once I got the slide and jig facing the right way and clamped on the cabinet, I had it attache in a few minutes. I just wish it had the feature to install the drawer on the slide, but that may be where the other brand comes in.

I'm just a diyer and I am redoing my kitchen a cabinet at a time lol and wow did these save so much headache and time with the drawers. You can't go wrong for the money. Before I was fussing around with spacers and that was awful. Being able to clamp it down while driving in screws is a breeze!

Works well. I used for retrofitting old cabinets with new epoxy glides. It holds the glide tight and let's you get it clamped in place and a couple screws thrown in the glide. However if your face frame isn't parallel with the back of the cabinets your glides will be off because this holds the glide true to the face frames. Still easier than trying to hold them up there and guess and fumble with screws. Best solution is throw it up get some screw in your glides and make sure they look even with one another. Then slide your drawer in and see how it tracks. If you keep the back screws loose the drawer will pretty much move the glides where it wants them. All and all I would buy again only think that needs some improvement is it doesn't hold the right hinge as well. As I have read in other reviews. But it's something you can work around if your aware of the issue.

... muss jetzt nicht jeden Tag und auch nicht regelmäßig Schubladenschienen einbauen - war jetzt grad mal. Finde das Ding aber genial !!!

This tool makes it so easy to set the drawer slides, one measurement that’s it. No more guessing or crawling around to make sure everything is right. It takes about a minute to install the slides. Thanks Rockler.

Muy buena herramienta y muy útil para colocar las correderas

Excelente producto para poner las correderas se los recomiendo vale la pena te a horras mucho tiempo en poner todo tipo de correderas

Simple easy to use