Kohree 12 Way 12V Fuse Block Marine, Boat Fuse Block Waterproof with LED Indicator, 30pcs Fuses 5A 7.5A 10A 15A 20A 25A, Automotive Fuse Box Holder 12V/24V Fuse Panel for RV, Car, Boat, Marine, Truck

I bought this fuse block to solve several needs I had when build a so called "Solar Generator". I needed a way to distribute power and add fused safety for 12V DC output. This block gives me the possibility to route power to up to 12 different outputs. I can select the fuse amperage u-p to 20A and simply insert it. The best feature is the LED indicators that show exactly which fuse is blown for easy diagnosis. The fuse block comes with 6 each of fuses from 5A to 20A. A convenient cover with labeling for clearly identifying the cable runs. The block also has a negative bus bar for power distribution. This actually saves me from adding an additional bus for that reason. This is a very ruggedly built and super versatile fuse block that can be used in a large variety of applications. I am very pleased with the quality and performance of this fuse block. It is now at the core of my 12V DC power distribution that adds the safety of fused connections. It is well built and designed, and it fits my needs perfectly. It is a super value for the price and comes complete with everything I needed to integrate it into my system. It is a terrific value for the price and I give it 5 stars.

THIS product enables 6 different 12vdc accessories to be in fused circuits from a 12vdc power supply. I got this item for my club car precedent and the power is coming from my 48vdc to 12vdc converter from my 48vdc lithium battery. It is well made easy to install has labels and extra fuses. I recommend using this product when you use a converter in your golf cart for your accessories --up to 6 ie lites radios etc.. it's really what you need to make your electrical trouble shooting easy when something stops working. Always check your fuses first then your connections when they do... Thx for your time reading my review...

Perfect for Ham Radio equipment. 95+% of all ham radio equipment; whether mobile or in your house; is 12vdc (13.8vdc). Just like a car. This can be your radio, automatic antenna tuner, powered SWR meter, noise canceller, amplifier transmit buffer. I also have an audio amplifier and audio equalizer to clean up and have better sounding receive audio. The point is..... in the ham radio world, almost all of our equipment is 12vdc (13.8vdc) because it was made for home or auto use. That means much of this equipment that doesn't need much power, comes with a plug in the wall power pack. (Wall Wart). Well, in the ham radio world, wall warts create a lot of noise. The less you have, the better. Now.... with the Kohree 12 way 12v fuse block, I can use my 1 main power supply (12v 40 amp) that powers my radio (which only needs 23 amps) to also run ALL of my accessories. Yes.... you could simply take all the power cords to all the accessories and radios and splice them together and plug it into the 1 main power supply; but what a mess. And what happens when you want to add another device or take something out. This is SOOOOOOO easy. And granted, the smallest automotive type blade fuse you can buy is a 1 amp fuse; and 4 out of the 7 devices I have use LESS than 1 amp; but that's ok. It didn't have ANY FUSE PROTECTION before when it used a wall wart. If the device had a problem and drew more current than the wall wart was rated at, the wall wart simply fried and died. At least now, I can throw in a 1 amp fuse, and if I want, I can add an inline glass fuse to the device power cord before connecting to this block. Glass fuses can be bought as small as 100ma (.10 amps). Now; I'm able to neatly have all my ham radio devices at home plugged into 1 power distribution, from 1 main power supply. I can eliminate all unnecessary wall wart power packs and reduce potential electrical noise. If I have any power issues, I can isolate each device very simply by removing the fuse. I don't have to disconnect anything. I don't need power strips for all the wall warts. And with a maximum current per each circuit of 30 amps; and a maximum for the entire block of 100 amps; this is so perfect. Definitely recommend it.

This is a great product. The one difficulty that an installer might have is if the install is in a difficult to reach area. Installer beware: I installed the fuse block in a difficult to reach area. The fuses will be easy to replace, but attaching each wire to the small screws is very hard to do. I used wire terminal connectors - the type with a loop at the end. Look at the fuse block. See the small screws? It's easy to attach wires to them with both hands. But, if you have to reach inside a small cabinet to attach wires to those screws you will probably drop the small screw several times. The fuse block would have been better if "terminal posts" were used for attaching wire terminals rather than small screws. That would allow the installer to hook the looped wire terminal over the post and then attach the hold-down nut. For that reason only four stars in the rating.

The Kohree 12Way 12v fuse block has more than enough access for my golf cart. It is so nice to have all connections organized so well. Under the seat worked well for placement of the fuse block.

Perfect for my application came with everything I needed for installation.

work,s grate

Really nice little unit for cleaning up boat wires. And great price too.

Matériel utilisé pour la réfection d'un circuit moto. Simple et pratique d'utilisation, avec témoin lumineux indiquant l'emplacement d'un fusible grillé. Le boîtier n'étant pas étanche pour cet usage, son faible encombrement a permis de le placer à l'intérieur de la boite d'origine de la moto pour le protéger de l'eau. Je suis satisfait de ce matériel et de sa qualité.

Preso per il mio impianto di servizio. Molto solido. Spia rossa estremamente comoda per individuare il fusibile bruciato.

I wanted a replacement for some old inline glass fuses on a centre console boat. This fuse block delivers; easy to install, easy to wire up, solid plastic cover, and gives it a fantastic professional finish, especially if it ends up being visible. I mounted it onto a piece of marine ply, which then mounted to the centre console, so it helped with the wiring routing. I had to cut the corner off the plastic cover because the main power came in parallel to the fuse block, but even tho I removed one corner of the plastic the cover still clips on securely. Also plenty of negative bus bar mounts make it super easy to route all the earths properly. And the red lights which tell you straight away if a fuse is blown is a great idea. Fault finding at a glance. I recommend this for wiring upgrades or replacement work.

nice quality

The first one I purchased was for my boat. I was replacing the wiring and navigation lights and this fuse block was the perfect size to install beside the steering wheel. It has been through heavy rainfalls and freezing rain a number of times and there has never been any moisture inside the panel. I purchased a second one for my motorcycle when I added two spotlights, a few extra clearance lights, and a USB charging port for my phone. Both fuse blocks have remained water tight and trouble free. If I ever need to purchase another fuse block this is the one I'll buy.