eTECH Collection 3 Pack of Tempered Glass HD Clear Screen Protector for / compatible with Apple iPad Air / iPad Air 2 / iPad Pro 9.7" model (fits both iPad Air, iPad Air 2nd Generation, and iPad Pro 9.7" Model)

I have used only one so far and it has worked well on our new iPad Air 2. Pretty happy with the product, good value for price. Just make sure that the oval cut over the camera hole is better aligned. Use a second person's help if needed to align before removing the first sheet. Then BEFORE removing the second sheet, remove all the air bubbles using a credit card from the screen. Take your time while doing that and don't worry about the scratches because the second sheet is yet to come off. When done, you can remove the second sheet. A little patience is required in removing all the bubbles, especially the smaller ones. I also tend to move all bubbles close to the edges or the camera or home button holes, before removing the second sheet. You will be surprised with the results. In case you still see bubbles visible, use thumb or finger pressure to remove them after the second sheet is removed. I disagree with other reviews, I was able to remove all the bubbles eventually. Unless you look carefully you can't tell if a screen protector is installed on my iPad. Having installed and failing a few screen protectors on iPads in the last 2-3 years, I guess I have learnt to handle them well now. Still have 2 more in case I need them for later.

Applying screen protectors is a real tricky task. It took me three tries to successfully apply the screen protector. I discovered a trick on my on. I have a plastic flyer that I acquired a few months back. It's about the thickness of a credit card and is as wide as the iPad Air. While installing the screen protector, I used the plastic flyer by applying pressure while rolling it. It worked like a charm. Another note, I turned the iPad in landscape orientation. It was much easier to install the screen protector this way. I gave this item 5 stars because it worked out in the end, and I've always had difficulties with other screen protectors. Update: I wanted to post an update to this review because I found another very clever method of applying the screen protector. It requires masking tape. Cut 2 or 3 pieces of masking tape, about 1 inch long each. Place the iPad in a landscape orientation (long side facing you). Without removing any of the protective film, align the protector and apply 2 or 3 pieces of the masking tape on the edge facing you so that the protector is perfectly aligned and opens and closes like a reading book. If there are any dust particles on the iPad's surface, then be sure to clean it now. I recommend using a compressed air can. When you are satisfied with the alignment, remove the inner protective film (to expose the sticky part of the protector). Then gently fold the protector over the surface of the iPad. You should get a nice, perfect fit. You can use the method I described above to remove the air pockets. After removing the air pockets, remove the masking tape and the protective film on the top side of the protector. Hope this helps!

Fit Ipad air like a glove. Installed in seconds and appears to be of high quality. Have no air bubbles and can hardly be noticed when put on correctly. Does not affect swiping, gesturing, etc... Feels as if you are using just the screen. A few tips when installing this or any other screen protector: 1) The screen MUST be thoroughly cleaned and be free of any lint or dust. 2) Use a lint free cloth. The cloth that comes with this protector works fine; just a little small. 3) Wait until screen is completely dry before installing. 4) Do not blow dust away, especially with your mouth. This just brings more dust to the unit. I tried it and just splattered saliva onto the screen.

Hey finally got them after 6 days. Acceptable waiting time. I followed the YouTube video and tried to applied the first one. It did not work out good enough. So I threw it away. And the reason why it went bad was that I lift it up and tried to clean up the fuzz too many time so it was being "exposed" too long. It causes even more fuzz on it. Then here is how I did the second. After I placed it with the masking tape and peeled of the Step 1, I wiped off the screen again. Then I SLOWLY laid it down with a credit card. Like really slow so it barely caused bubbles. Even there were bubbles or some tiny fuzz ( as long as it's not a big crumb ), I didn't stop until it was laid flat. Then I just used credit card to scratch the bubbles out. It turned out perfect! One more thing, try to get as many bubbles out as you can before take Step 2 off. But some tiny ones you do have to fix it after taking off Step 2. So remember to use the cloth that comes with the item to push bubbles after taking off Step 2!!!! Or else you may end up with a lot of scratches!!! Update: I've been using it for couple weeks now. And it gets a lot of scratches out of no where. I will have to apply another one soon and see how it goes! Will come back and update again.

Great product great value

I received my IPad Air2 as a gift. I did notice that the screen was very prone to finger prints. Not a big deal really, but started reading and comparing different products on Amazon when I saw the eTECH listed for only $4 dollars and some change with free shipping and tax free. I figured for that price I could at least practice with the installation and get more later. I read a couple reviews saying it was a real pain to get them on straight and without bubbles. One of the reviews, explained in very good detail how to install them the easiest way with the best results. I received my delivery within a week and attempted to install it as the previous reviewer suggested and it went very well the first time. The key is cleanliness. I mean very clean. Before you take the protective film off, align the clear protector with the IPad and tape one long side, making sure to check the alignment continuously. When your satisfied with the alignment lift the open side of the film up like a page from a book and carefully remove the protective film from the IPad side of the cover film and gently lay the film on the IPad. Before removing the outer covering and using a credit card or drivers license, slowly start at the side thats taped and start pushing the bubbles to the opposite side of the IPad. Take your time and slowly push all the bubbles out from under the film. As I said before, I can't take credit for this method of installing the film, but it worked for me. Hope this helps someone else! Enjoy! (A bit long winded! Sorry!)

The protectors themselves seem nice enough, but I had a very difficult time putting the on my iPad without having lots of bubbles that i am unable to move off to the edge. It is fairly easy to pick up the protector and try again, but even after several trys, I was still having problems. In fact, it's a good thing there are 3 in each pack because I totally gave up on the first one and threw it away after so many attempts to put it on without bubbles that I ended up with tiny specks that I was unable to remove from the back. I'm on the second one now which still has lots of bubbles, but only only a few specs so I'm leaving it on at least for the time being. The next time I'm around one of my kids I will let them have a go with the third one to see if they can put it on any better than I can. This may just be a problem with me, but I had no trouble putting a clear protector on my phone and my e-reader.

Fit perfectly. Would recommend the purchase.