Tyger Auto Fender Flare Compatible with 2018-2020 Ford F-150, Smooth Textured Black Paintable Bolt-Riveted Style 4pc | TG-FF8F4378

Excellent product fit well look gppd. Direction to install not very Good. Aspechly on front of truck

I am SUPER pleased with my Tyger fender flares. The pic above is of them on my 2018 Ford F150. They are a GREAT custom fit product, BUT you need to do your due diligence when reading the instructions and installing them. Here's what I mean: The provided instructions are good, but as I was waiting for them to arrive, I watched a couple of videos on the installation of them. This helped a TON!!! I would strongly suggest that you do the same, so you don't get frustrated with the installation. The fronts are definitely more difficult than the rears. I did it myself, and they came out great! I found, especially since I was installing them myself, that hanging the center screw on each flare was the easiest way to get them 'on,' then continued with the next ones. As many people say, there is a little 'muscling' involved to get them just right. Following the contours on the body line will help that quite a bit. They look great, and are super snug against the body - and YES I installed the weatherstripping on the flares to insure a snug fit. Solid 'A' for this product!

They fit like a glove on my f150. Value for the money. Holes alined good. Quality is great.

Husband loved the fenders for the 2019 Ford F150 truck. His truck is "Sport" edition so this accessory boosts the overall look. The only downside is he had to have a screw installed underneath the front fenders to attach to vehicle in order to fit, but no one will notice that minor detail. Overall, he is happy.. We haven't taken it to a car wash yet so we are hoping there won't be any issues since the instructions says "no automatic brush cleanings" (with a tiny car wash picture??) But others say they went many times and it has been okay for them, so we'll see... Mechanic had no problems installing.. **P.S. The rivots are only for decor which doesn't attach to your vehicle and the factory installed fenders have to be removed in order to install these. Our truck only has rear sensors so these fenders did not obstruct it from working.

I was having issues with every small puddle I ran through. The entire side of the truck would get covered in mud, due to the offset of the tires. I purchased these hoping to get more than what I paid for. I did... They took about 2.5-3 hours to install. Everything lined up perfectly and looks great. We'll see how they hold up, but they seem to be pretty good quality.

What is advertised on Amazon is not necessarily true. I purchased the fender flares for Ford F-150 2019 and they said that they were designed for that particular vehicle well I got out my first one which was the left front and put it up to the side of the truck the body lines were off and when I got the instructions out and was going to install the flare none of the holes matched up the piece they give you for the inner brace I guess it is doesn't match up I only have three holes that are filled with plastic inserts and one bolt very front nothing like that was described in the instructions I am thoroughly disappointed thoroughly disgusted with what they advertise as a matter of fact I ordered a set of seat covers from a company try to install them with their instructions and no way in this God's green earth with those seat covers fit so beware

I have a 2019 F150 with ecoboost. It has the plastic trim on the wheel well that seemed as if it was blocking off the space for the bracket. I will say that the bracket is EXTREMELY confusing, but just a tip, it goes on the inside and the angle pieces flush against your factory holes. The flat piece that you add the clip onto will sit not resting on anything but that's how they are supposed to work. I hope this helps others because its what took me a lot longer than I'd care to admit.

Perfect for my 2018 Ford f150, supercrew xlt. Best damn $150 i ever spent. Wish the front were as easy as back. Only because of the inner retainer mount. Looks great. A little loose in front. Then i set outside facing sides towed sun for 3-4 hrs. Pulled right in

I really like the looks , I have to take off the fronts again they did not fit well , hoping that was just me and not the flares.

Fit perfectly my f150 2020 xlt extended cab long box 4x4 Job take about 4h helper is required some time. Everything line up.

Look awesome!! Very easy to install all parts you need & extra!!💯👍👍👍

Fit perfect F150 👍

Terrible product. I was sent an already returned set, return slip was actually in the very damaged box. All the bolts were attached and one of the fender flares was so bent it wouldn’t come close to fitting.