3M Rearview Mirror Adhesive, 08752, 0.02 fl oz

Mirror still attached after 4+ years. I would say it worked!

I am reviewing the REAR VIEW MIRROR ADHESIVE. It is crap. The headliner spray may work fine, but the REAR VIEW MIRROR ADHESIVE IS JUNK!!!I used it exactly as directed, and just like another reviewer of the REAR VIEW MIRROR ADHESIVE, it fell off almost immediately.Avoid the REAR VIEW MIRROR ADHESIVE.Very disappointing that this review gets watered down by mixing it with headliner spray adhesive. Their headliner spray is giving their REAR VIEW MIRROR ADHESIVE an undeserved good name.

This adhesive works amazing, but you must prep correctly first!! ***Very important***1) Make sure you wash the inside of your front window.2) It also doesn’t hurt to apply alcohol over the spot on the windshield you will be using to attach the metal plate to the glass.3) Make sure you clean the metal plate with alcohol also.****If you’ve already tried applying mirror to glass & it didn’t work, this tip will most definitely work!****👇👇👇👇👇👇👇👇👇👇4) Get a small piece of very gritty sand paper & scratch up the metal plate’s surface that holds the mirror to the glass so the activator & adhesive have something to grab onto.5) Apply the blue activator to the entire back of the scuffed up metal plate & to the area of the windshield you will be attaching the metal plate to. **Wait 5 minutes**6) Apply the adhesive in the center of the metal plate. The adhesive will squish out to the area around the rim when applying it to the window. ****(I actually spread the adhesive all over the back of the metal plate very lightly.)****7) Attach the metal plate to the windshield & hold for 1 minute.*****Here’s another hint to this working. The key is to get your windshield as HOT as you can. I live in Florida so my windshield is always hot. Take a hair dryer, or a heat gun, or leave windshield in the hot sun to get it hot.*****8) Because my windshield was so HOT from being in the Florida sun, as soon as I attached the metal piece to the glass, it literally stuck to the glass instantly. I only had to hold the metal piece for a second.9) *****VERY IMPORTANT******Don’t put the mirror on the metal plate right away. Let the metal plate attached to the glass CURE for at least 24 hours.If you follow these exact steps, I guarantee you this will work because this 3M adhesive is great stuff!!

Used to Attach car Rear View mirror to front windscreen. Dries quickly, Ease of application, Glue quality seems good, bonding was firm.

the other day my mirror fell off because of the extreme heat.So i ordered this to stick it back up to the inside of the windshield. Frankly I was skeptical if it would hold in the crazy heat we have right now because this particular car is parked outside in the sun with the windows rolled up to avoid theft.It works though! It has been holding for over two weeks and yesterday it was over 100 outside of the car and probably 120 inside at the mirror mount. And this particular rear view mirror is sort of a heavy one with some electronics in it.I did make sure to glue the mirror mount point on the windshield just after the sun went down so it cured over night and didn't actually attach the mirror until two days later to REALLY give the epoxy time to set.Then i put it on and it has been working ever since!you will have some extra epoxy because they give you plenty so if you have some other things to glue I suggest gathering them near so when you finish the mirror mount you can use the rest of the epoxy on them too.

I live in sacramento and the summer heat left me with a rear view mirrow on the floor. The windshield was replaced about 4 years ago so that meant they had to affix the rear view mirror back to the new windshield. On the mirror there was a clear double sided tape that i peeled off. The metal surface was grey and i prepped it by sanding off any adhesive residue. This left a shiny light metal surface. My windshield had a black coating where the button was suppose to adhere to. It was not direct to glass. I followed the directions in the package and it worked perfect. It has been about 3 months and it has not fallen off. We will see how long it lasts.UPDATE: 1/2020It is still attached no issues. I really believe it is all in the prep work. Sanding the metal button (metal piece the mirror slides on to) and cleaning the windshield surface that it is going to affix to is a necessity in my opinion. Also, if you are attaching the button directly to the glass and their is no black coating could make a difference as well.

I have been an Amazon Prime member from the very beginning and this is the first time I have to write a review like this one. When the package arrived, I thought it was an e-bay delivery with A home made envelope. No biggie, we are in a pandemic. But here is all you need to know about the product: the glue you buy for your school supplies will work better that this worthless product.I followed the instructions step by step, and this is not the first rear view mirror I’ve had to glue back on a windshield, and the stupid thing simply would not stick. You have been warned, this product simply does not work as in not work at all. And, alas, the return policy does not allow you to ask for a refund or a replacement.If you buy it it will be akin to handing a donation because there is nothing you can do with it. I cannot believe Amazon sold this to me as a dear view mirror adhesive.