DC1700 Battery Operated Air Quality Monitor w/Accessories

8/16/17 - Update - The fan noise finally got me to locate a quieter fan solution. Noctua just released a 5v 60mm fan that bolts in. It was only available from Amazon UK (https://www.amazon.co.uk/gp/product/B01G20CHX4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1). I ordered a couple to test with. Big improvement. 10db quieter with the same airflow. See the attached photos. These are A/B photos showing one unit with standard fan and the second with the Noctua - db at about an inch from the fan and fan speed taken at about 1/2" from the vent. The fan swap takes less than five minutes. Remove four case screws, cut fan wires, strip fan wires, remove stock fan, install Noctua fan with two wire conversion clip (included), use included crimps to join wires, reassemble. Worth the trouble if you keep the unit in a main living area. You can still hear it, but it's no longer obtrusive. Next project is building a cosmetically improved case and integrating additional air quality sensors and a serial to wifi solution to put the device on the network without being connected to a PC. I'll update again once I have that figured out.... 8/6/17 - UPDATED - After a bunch of bench testing and some back and forth with Dylos, I've come to the conclusion that the issues I'm seeing are related to the power connector rather than the battery or power supply. Bizarrely, after about 30 plug/unplug events during bench testing, the connector started working reliably again. I'm raising my rating back up to 5 stars. This really is the best air quality meter available for the money. If you run into intermittent power issues, test the connector. I would highly recommend saving the money and not buying the battery version though. 7/10/17 - UPDATED - So, today, after 5 months of use, the unit reports Low battery and refuses to stay powered on when connected to power. So I go to the manufacturers website to see how to get this fixed. Stupidly I did not confirm what the warranty was prior to purchase - It's 90 days. So, not I understand why it's 90 days.... This tool works well for its intended purpose, but at almost $500 a 5 month life span with only 90 days of warranty is completely unacceptable. If you are looking at buying one of these, DO NOT BUY THE BATTERY VERSION OF THIS PRODUCT. You are paying for a feature that insures the device lasts less than 6 months and is then useless. The fact that a dead battery kills the device is ridiculous. I've emailed the manufacturer to determine what can be done, but honestly, I'm not optimistic. I will update again if I get anywhere with repairing this device. ORIGINAL 5 STAR REVIEW BELOW This devices is worth the money. I bought it to test the air quality in my house and to try and figure out what was triggering my breathing problems in my house. It is pretty amazing how effective this device is for this purpose. My house, with only the HVAC running reads from about 10-180 which is excellent air quality. If I run the gas fire place without running the HVAC is jumps to 1700-2000, horrible air quality. The fireplace is a direct vent high efficiency model. When we cook, depending on what is being cooked, the room the device is in will jump to a minimum of 1400 and I registered as high as 4000 when something was burned. This is with the range ventilator on. If we don't run the HVAC fan to filer the air (Merv 16 filter), the air quality will remain horrible for 8-10 hours. If we run the HVAC while these polluting situations are occurring, the room is back to <300 within an hour. What this has shown me is that the house has insufficient make-up air for the range hood, and it likely has a pressure balance problem when running the fire place. Very enlightening. Until I can get a make-up air system and an ERV installed, I'll be running the HVAC fans on circulate throughout the day. One star is deducted because the device looks "cheap" due to the molded plastic and huge gaudy white logo and, more importantly, it is really loud due to the small fan. If your room is quiet, and this thing is running, it is distractingly loud. For the price, these two areas are disappointing. In case the manufacturer reads this review, here are a few suggestions for improving the device: 1. - Change the form factor of the device make the device large enough to house a 120mm Zalman silent fan. 2. - Build the case out of metal for durability and improved cosmetics. 3. - Include support for wall mounting and POE power and connection to a network for remote data logging, and even better, an API so it could be tied into an automation system - think Crestron on the high end or Vera on the low end seeing the air quality dropping below a configured threshold and automatically ramping up the fan speed of the ERV and HVAC fans to filter the air faster and then automatically lowering the speeds once the condition is corrected. 4. - Give an option for remote sensors - imagine wireless sensors that could be installed different rooms feeding back to a master device.

As others have said, a great unit and getting something better would cost far more. My only complaint is the fan noise. A quieter fan or an easy way to replace the existing fan would bump this to five stars.

The Dylos DC1700 works as advertised except that the internal battery life isn't that great. I purchased mine in 2014 and battery stopped taking a charge in late 2017 rendering the device completely useless; a $500 paper weight. Go for the Dylos 1100 pro instead.

I purchased this device to monitor indoor air quality as I have been getting quite a lot of colds over the last few years and thought I may have an issue with indoor air. I received the device today, plugged in and got consistent reading around 50 which corresponds to "Excellent" on Dylos scale. Naturally, I was very skeptical so I decided to do a test: * Light a match nearby and see if it will detect the smoke particles. I lit the match approximately 1 foot away from the detector. (You guessed it, don't repeat my mistake!) Not only will it detect it -- it will jump off the charts if the match is that close. In a matter of seconds the reading jumped from 2 digits into 5 digits: 30,000 and growing rapidly before I was able to put out that match. It took a while for numbers to come back down in that room (but it also took a while for the smoke smell to disappear) I am definitely keeping the detector! There is no question that it works. If you want to convert the Dylos measurements to PM2.5 just google "Using a new, low-cost air quality sensor to quantify second-hand smoke (SHS) levels in homes" paper by Semple et al. They compared the exact same Dylos DC1700 to some other meter and found the conversion formula: PM25 = 0.65 + 4.16*10^(-3)*D + 1.57*10^(-7)*D^2 where D is the number that you see on Dylos screen

This Dylos DC-1700 air monitor is quite effective accurate on keeping an eye inside your house to let you know how pollute the air surrounding you. The device is made in California,US. I can say this laser Dylos is very sensitive on detecting the air in your room,and it'll raise the numbers and bars once it senses any change in your room or it's surrounding for hours until all smells are gone. You may use it on the outdoor or any where you go up to 6hrs since it is a rechargeable or you might use at home with its power supply. The down side of this monitor device so expensive,cheap designed and the rear cooling fan which drawn air through the device is so loud that it could bother you when in operating.

Please avoid Dylos products

This is an interesting detector to have. I think it is good to know the amount of particles in the air one is breathing in, especially after a renovation or clean up, etc., or just wondering why one has symptoms of a cough, sinus issues or just not feeling well. It helps one to know if one should use an air purifier and then test the air again to see if it decreased the particles in the air and their symptoms. It displays the number of the smallest particles ,which are the more concerning ones that can reside in one's lungs, and separate numbers from the larger particles. The device is super easy to use. I think we all need to know what we are breathing in to control the environment we spend the most time in, our home, even our workplace. It is important to have as a device to protect our selves, our family, children and pets.

I wish the monitor could breakdown for me exactly the particles being found in this atmosphere and the percentage there of.