amFilm Screen Protector for Apple iPhone SE 2/ SE 3, iPhone 8,7, 6S and 6 | HD Clear, Flex Film, Case Friendly, PET Film, 3 Pack

Fabulous! I have been using screen protectors (cheap as well as expensive ones) for a long time and have never, ever applied any perfectly. It was always a frustrating and futile exercise to align properly and ensure no bubbles, lint remained inside. I always wondered why someone couldn't come up with a better designed product to eliminate these struggles. Not anymore. These are pretty much perfect. I applied, as per the instructions, in a humid bathroom. No lint, no bubbles remained. There are some rubber bands provided to hold the unpeeled protector on screen. You can align as much as you wish and these rubber bands will then hold it in place. After that, apply two band-aid like stickers provided to secure protector in place and remove the rubber bands. Now you flip the protector over and remove inner cover, stick to the phone. Remove any bubbles which form. Once done, peel away the outer cover. Enclosed instructions with diagrams will explain this process much better than I have. And it all works flawlessly. I have a perfectly aligned application with zero bubbles. Now, the protector doesn't go to the very edges of the display. I think this is because of the rounded edges of iPhone 6. There are cutouts at top and bottom for Home button, Camera lens and speaker. Everything else is covered fine. I did not feel that the protector should have been any bigger. It covers the screen just fine. Touch, feel and look of the phone post application is exactly as it should be. The packaging and delivery was also better than expected. Price is very low compared to some alternatives I have seen online and in stores. In a nutshell, for iPhone 6, I cannot imagine how any screen protector can be any better. Long term protection offered can of course be judged only over an extended period of usage. However, at present, these are perfect.

I'm glad someone finally developed a more foolproof way to install a screen protector. I've tried many over the years... one that required an utter soaking with a special solution and turning off the device for 24 hours (really???), another that was horribly prone to bubbles. Another was like a layer of silicone on top of my screen that changed the feel - I had to re-learn how to "touch" my touchscreen. This product was so much better and easier! The package contains three screen protectors and the standard screen cleaning cloth and squeegee cardboard. But here is the improvement: they provide (a) rubber bands and (b) hinge tape to aid in positioning the screen protector before the outer film is removed. So here you go: Position the film component on the screen. Secure it with the rubber bands near top and bottom. Adjust the film position; it will stay there by virtue of the rubber bands. THEN! Peel off a hinge tape and apply it to one edge of the film, wrapping it around to the back of the device. Then peel off a second hinge tape and do the same. The two hinges should be placed between the rubber bands and far enough apart that the film won't shift. Then, remove the rubber bands and flip the film away from the screen. The hinge tape will hold it in the right spot. Do another screen clean with the cloth (here's where you really want to avoid dust, so either do this in a steamy bathroom or use a third piece of tape to remove any tiny flecks of dust). Peel off the inside layer of protective film, then flip it back onto the device screen. It will be positioned Per.Fect.Ly. Squeegee out the bubbles, then carefully remove the outer layer of protective film, taking care not to pull off the actual screen protector in the process. Squeegee out any remaining bubbles. DONE. One suggestion for the manufacturer: the hinge tape is called "Dust Removal/Hinge Stickers". There are 6 strips included. That allows for 2 strips per screen protector. If I end up using all three screen protectors over the course of time, that would require all 6 strips to be used as HINGES. Aside from reusing the strips from application #1 on application #2, which ones should I use as dust removers? What if you were to include at least 3 more strips in your standard packaging? I realize that is rather petty and it certainly isn't a deal-breaker. I do own a roll of tape or two and could figure this out... just thought I would share. In all, I'm very pleased with the end result. I'd never know there was a screen protector in place on my iPhone, and I was able to install 3 of them on the phones in our household at 6am over my first cup of coffee.

I've tried screen protector products from multiple companies for all of our iPhones. By now, it's a line that I'm fairly familiar with and I hope my review can help you in your buying decision. My review will comment on the product, its functionality, price, tips/tricks, and quality. Product: The screen protectors (3) comes in a 4x6'ish insert. Included are a microfiber cleaning cloth, a squeegee card to push the air pockets out and some stickers to remove dust. On each side of the screen protector is a sticker cover that you'll take off as part of the installation process. The film has appropriate size cutouts for the front camera, microphone speaker, and home button. Due to the new curved edges of the iPhone, I can see why amFilm has decided not to cut the film all the way to its edges. I'm okay with this. In fact, it makes installation easier! However, here's one thing I do not like. The width of the screen protector appears ever so slightly thinner than the screen (pictures included). I can just a tad tip on each side. Most people may not even notice but I think there was plenty of room here for its designers to make it a tip wider. This was where I took off the 1 star. Functionality: The reason why people buy screen protectors is because they know how infamous it is for iPhone screens to become victim to coins, keys, and other sharp objects. While these marks won't impact your phone experience much, it does add an annoyance to the screen when its off (like a zit... under your nose... on a Friday night when you're about to meet friends). With a screen protector, I feel confident that my phone will retain its beauty from now until next year when I resell the phone. The screen itself does not impact the beauty of the iPhone screen at all. In fact, I barely even notice it being there when I'm using my phone. Smudges still appear but I don't expect a screen protector to eliminate this issue. Price: I purchased this over Amazon for $6, roughly in line with the other products I've tried in the past. With the package coming with 3, this was a huge bargain. Installation tips: Make sure to wash your hands with soap to get rid of oils and dirts. Use the microfiber cloth to clean the screen. Follow the instructions carefully and make sure to install from the top down. You always want to match the cutouts starting from the side that it's most difficult (the top where the holes are smaller). Remember that the film isn't very wide so you have to be careful and install it slowly and accurately according to the iPhone's dimensions. Quality: Here, amFilm stood out. Like I've said, I tried other companies' products and none was as durable as this one. I was pleasantly surprised when the screen protector looked fine after i had to take it off (stupid dust got underneath somehow) and reapply it. My iPhone screen is in perfect shape and I am confident it'll remain this way going forth. Overall, I highly recommend the product, although I hope the company can think about the film's dimensions a bit. I do think it should be wider.

This is by far the best screen protector that I have had for an iPhone. I would definitely recommend it to anyone with an iPhone 6. To anyone wondering: No, it does not cover the whole screen .. because it couldn't. The screen on the iPhone 6 is curved and no screen protector would stay on on a curved screen (and putting a case on the iPhone would not be possible). It does cover the complete viewable part of the screen. Putting on this screen protector is unusual (in my experience). Here are the steps: 1. You line-up the screen protector on the screen then put the supplied elastic bands on to hold it in place (and you can make small adjustments to your positioning if you wish). The only potentially confusing part of this first step is that you put the side with the "Step One" tag facing the screen. 2. With the elastic band still in place, you further hold the screen protector in the desired position with the supplied (lightly) adhesive strips. Then you remove the elastic bands. 3. The adhesive strips now form a "hinge" that allow you to flip the screen protector to remove the "Step One" side of the screen protector and then flip the screen protector back on to the screen (if the adhesive strips are firmly in place, the screen protector will flip back into the desired position on the screen). 4. With the screen protector in place on your screen, you can remove any air bubbles. This part worked like a charm and took me less than 30 seconds (with other screen savers that I have used, this used to be the worst part of the procedure). 5. Remove the "Step Two" side of the screen protector ... and you're done. As I say, I would recommend this to anyone (although the instructions could be written a little more clearly, especially given that the procedure of putting the screen protector on is a little different from others).

I originally bought these screen protectors because it came with 3 and the price was low. That way when the screen protector gets too many scratches I can just replace it or if I get too much dust underneath during application. What I didn't know was that this company has come up with a really ingenious way to apply the protectors. They have you align the protector without taking any of the protective films off it. Then you use these clear rubber bands to hold it in place and do final adjustments. Then you have these removable pieces of tape to hold the protector in place while u remove the rubber bands. Then you use the pieces of tape like hinges to turn over the protector, remove the first protective film then flip it quick back to the phone. The tape holds it in place so it is very easy to quickly and perfectly apply the protector. It makes application super easy and quick. I will only buy this company's protectors from now on! Here is a good tip for those of you having trouble with dust getting underneath the protector during application: RUN A HOT STEAMY SHOWER! Yes you read that right. Run your shower hot and steamy for about 7-10 minutes depending on your bathroom size. While doing this keep the door closed. Once the bathroom is like a sauna apply the protector in the bathroom. The high humidity in the bathroom from the shower weighs down all the dust in the air so all you need to do is wipe down your workspace and you won't get a single piece of dust under the protector. It works every time!

When I first looked at this screen cover I was a little reluctant to buy it due to some of the reviews. However, I took a chance. I must say, it is a very well produced screen cover for the price it's offered for. The package comes with 3 screen covers and additional tools to help you when applying the screen cover. It comes with a cloth, clear rubber bands, tape, and a card to get the air bubbles out. There is a small instructions book with very simple and easy steps for applying it. This was extremely helpful when applying the screen cover. All the tools were beneficial and helped when applying the screen cover. One thing I found was a little difficult was applying it evenly. I am slightly OCD so I redid the positioning several times. It is a little tight and you have to be careful to make sure it is even like you want it. However, the seller makes you aware of this through a email and in the details. (Due to the curve of the phone) Throughout the instructions it gives you very detailed step by step instructions. I had a few tiny air bubbles once I put it on but that was my fault. (I do not have a sturdy hand) Overall, I would recommend purchasing this screen cover package. You get three in a pack and I love it so far, even with my two tiny air bubbles!

I am not a paid reviewer. I was not given anything. I'm a guy who has used and tried to use a wide variety of screen protectors. In terms of ease of install, these were the most painless, easy to use protectors I've tried. First off, there is no wet process here. No solution to apply. No awkward positioning required. You basically clean your screen. Sit the protector on top. Use 2 clear rubber bands to hold the screen on as you apply 2 pieces of tape to the right edge and around the back, forming a hinge. Pull the step 1 tab to release the plastic cover exposing the sticky side of the protector and let the tape hinge help drop the protector perfectly into place. Squeegee out any bubbles and then pull the step 2 tab which pulls off a protective film covering the front of the protector. Done. There is a link to a very helpful video in the instructions which makes things quite clear. The protector itself is fairly thick with a soft, semi-matte finish. It took me about 10 minutes to do 2 devices and that was taking my time. I can't speak to durability yet, but the feeling under the finger is very comfortable and nice and there is minimal interference with the screen image which looks sharp and natural. Some screen protectors are absolutely nightmares. They pick up smudges, dust and fingerprints, require an application solution or are so thin that they are easily bent while applying. These went on easy and the price is certainly right because you get 3 screen protectors in the kit. I usually screw up at least 1 trying to get it on cleanly. Not this time!

I just bought a 3-pack of these screen protectors, and they are really no different from similar protectors I've bought for many smartphones over the years. Each comes with a unique set of instructions, which is odd because they all really get applied the same in the end - clean screen, peel 1st layer, align & stick, remove bubbles, peel 2nd layer, done. This particular brand thought to make the alignment easier by offering little rubber bands and "hinge" stickers to save your alignment position and speed up the time to get the protector on there before the wicked little dust particles manage to find their way back in. While I do expect this protector to prevent most micro-scratches, which arguably isn't a problem for the iPhone 6 anyways, I don't expect it to offer much in the way of drop protection. That's OK because drop protection is not what I bought this for. Now to the reason for the docked stars and why this is simply an "OK" product: the fingerprints left on the protector from normal use (even with clean hands) blurs the display and obstructs my experience much more than I anticipated. What's worse is when I try to wipe off the prints. With the bare screen, any residue comes off relatively easy when wiped with a soft cloth. However, with this protector, my prints simply get smeared all over and blur the display even more. I wouldn't be so concerned if my prints accumulated after a couple months of use and neglected wipings, but I am noticing the rapid accumulation of my prints even after a few uses. For the person who is on the fence about using a screen protector to begin with and is considering just sticking with the bare screen, this might be the decisive factor you. Expect to wipe your screen often, to be frustrated with how fingerprints refuse to come off, and to have those prints more noticeably glare in certain lights, even while your viewing your display on bright settings. Despite the fingerprint issue, which has plagued these cheap plastic screen protectors since inception, this is a very usable and affordable product to prevent the little dings and scratches you'd encounter with everyday use.