WhitelineKLC141 Sway Bar Link Kit

Purchased a Detroit Axle ball joints and ti-rod ends combo kit for the front of the car.These ends links finished off the install of a racing swaybar in the back.And just wow, my Jetta MK5 is not lowered, so now it has both the turning and height to take some rough roads on an insane radius!So happy with these end links; mechanic was impressed with them as well. Buy them, if your suspension needs a refresh! So so gooda

Using these with an adjustable rear bar on my MkV GTI. I've put a few thousand miles on them so far, and they're ok.I highly recommend getting a super thin wrench or some needlenose vice grips to complete the install. When you start torquing the nuts, the bolt/ball joint will spin. The nut welded to the bolt on the inner side of the mount is extremely thin and right next to the rubber boot for the joint, so holding it in place is a huge pain.Once they're on, adjustment is easy. (Make sure you adjust them with the suspension loaded.)You might want to check torque specs after driving for a bit. I had one bolt loosen up after a few hundred miles, but after tightening again it has been fine. Some Locktite might come in handy.One issue I have with these (and several other brands) is that they get twisted and never return to their original "flat" position. I'm not sure how much this affects performance, if at all.

The product itself is fine but the hardware included is the worst I've ever seen, completely unusable..

These worked perfect for my 2005 Subaru Outback with a 2 inch lift

Installed on Toyota Supra Turbo MA71 in conjunction with Suspension Techniques sway bars. These are listed as rear from seller. That is incorrect they are only for the front. Gave me that extra adjustability I needed for a lowered vehicle. They fit properly and feel of good quality.

No more clicking form the rear sway bar.Great product. Adjustable. Fits perfect on my Toyota Corolla S 2001

3x the diameter of stock and adjustable. Perfect for corner balancing on coilovers. Fits Perfect. There is NOTHING better available.

Awesome NEW WHITELINES to quiet down and HOLD down those thick sways

So I bought these because my honda accord OEM front links were making noise and OEM just isn't going to cut it as I have my suspension fully done. My thoughts: the packaging is exceptional, the product is what I hoped it would be with one exception. There is no hex nut on the inside to hold the ball joint when you are tightening it all together. I had to use a pair of needle nose vice grips to hold them while I was wrenching it all together... just like the oem ones. Yes there is an alan key slot on the end of the threads to hold it steady (like the oem ones) but I really expected a good quality aftermarket brand to have this. My rear sway bar links from Fastline have these. Either way though I had the tools and it wasn't a big deal.I did also like how this set came with washers (8 of them), something the OEM set does not come with. And I feel that helps a lot to keep things nice and tight. I was really happy to see those in the packaging.Went for a test drive and sure enough, car is quiet again and they are definitely stronger than the originals.This is definitely a good product. I have seen better however and I would have liked to see the hex on the ball joint so I didn't have to use needle nose vice grips. Its a bigger deal down the road if you have to remove the end links and don't want to damage anything. That's the only reason I am giving it a 4 star.

Other reviewers are wrong, or this part has been updated... you don't use a thin wrench to tighten them up. There's an allen key hex in the end of the stud to hold the stud from rotating while tightening the nut. 2/10 difficulty level for installing this part. Getting your old stock ones off might need a reciprocating saw.

Installed less then 1 year ago, and the left side link crapped. Bad batch, I don’t know, but for the price I am disappointed with whiteline products. Will try and get a replacement with Amazon under the 1 year warranty, but pretty hard to get a hold of amazon customer service right now.