ICIHUnder Cabinet LED Light 10Pack 12v LED Light Strip Rigid Super Bright White 6000K SMD5630 9W 84LED Double Row 0.5m/20in for Kitchen Cabinet,Counter,Showcase Vehicle Replace

easy install now I want to do the rest of the fixtures in the coach

Used them is my boat work room and electrical area

I used these to replace fluorescent tubes on my boat, they work great and are much brighter and draw a LOT less power from the battery bank. Very happy!!!

These strips are very bright and are perfect for under cabinet or under shelf lighting. They can be cut into segments as short as 35mm, this means they can be cut very close to any size you need. I prefer these over puck lights because they're only 1.9mm thick and are much brighter. They are also dimmable, from 7.2 volts which is almost off, to 12 volts which is full brightness. The current drain for each strip is around 500mA at full voltage. The LEDs appear to be high quality and are even in brightness, even when dimmed.

Used to replace LED strip in a bathroom light fixture. Much brighter than the existing light. Was able to cut to fit and doubled the number of individual LEDS in the fixture. Using the included double sided tape made the job easy.Great value!

Adhesive not great. Good light but the Adhesive is sub par.

I bought the 12 volt version of these light strips for use in my attic. The peel and stick backing on these is very adhesive. But I know that if I just stuck these to the wood framing in my attic. When summer comes and it gets to 120 degrees up there. They will fall off from the wood. I used strips of plastic trim that I found at Home Depot to stick the lights to. Then screwed the plastic strips to framework. If you are using these strips for lighting spaces, such as attics or other areas. You will probably need to use two strips side by side to be bright enough.I AM GIVING THESE A LOW RATING BECAUSE THE BOX THEY COME IN SAYS 5V ON ONE SIDE AND 12V ON THE OTHER. WITH NOTHING TO MARK WHICH VOLTAGE IS IN THE BOX. So twice now I been sent 5V versions of these lights by mistake. These 5v version lights are amazingly bright with my 12V wiring. But they quickly get very hot.

Used these to replace led lights in rv that were inop. I simply measure , cut to length, and wired in to factory switch. Really simple and bright. I reworked 12 fixtures and still have spares. I do recommend these for the do it yourselfers.

as described

Fits perfectly, replaces expensive neons (energy hungry) bulbs inexpensively, easy to convert too LED :-) Thank you.

Great light bright and working with the dimmable switch

Bonjour, quel est l’adapter requis pour brancher ce type de LED? Merci

It’s missing the usb plug in head and you’ll have to purchase extra wires for dc outlet.