PowillingInnovation 6.5Ah Lithium-Ion Replacement Battery for Dewalt 18V XRP Ni-Cad Battery DC9096 DC9098 DC9099 DE9039 for Dewalt 18Volt Batteries

This is my second one of these batteries. The first one has lots of power -- WAY more than the original DeWalt ones. It runs my sawzall and circular saw longer than I've ever needed it to run for one task, where the original batts would hardly ever complete a task without a recharge. Not only to they run way longer, but the tools deliver way better performance. Most of my dozen-or-so 18-volt DeWalt tools are over 15 years old and now they run stronger and longer than when new.So the first battery (two years old now) has an annoying problem. It loses electrical contact with the tool and has to be "slapped" back into the tool frequently during use. I adjusted the contacts and tried other tricks but the battery just didn't latch tightly enough (I guess) in those particular tools.The new battery has all the plusses of the old one and never loses contact. So they've improved the latches somehow, and the battery installs and releases easier, too.Highly recommended batteries!!

These are a Low Cost WONDER!! They hold the charge FAR longer than the factory NiCad batteries and Much Lighter!

For the price, this is hard to beat.It will randomly cut power when trying to use which is beyond frustrating, but again with this price you know there has to be something annoying to deal with. I just press the "battery life" check button when this happens and it fires right back up

I have bought one of these batteries after 4Ah Ni-MH replacement from Vanon proved to be too good to be true. You can find a separate negative review on this fake battery on Amazon.This Li-Ion battery however is very different. It is constructed out of 10 cells (18650 size, 3.6 V) and has a circuit board on top of cells to provide safety and charging capabilities in a regular Dewalt Ni-Cd charger.The fit of the battery to the tool and charger is excellent. Battery weighs 647 g, the original Dewalt Ni-Cd one weighs 1072 g. Battery came half-charged, but provided very good power even in that condition. Charging in the original Dewalt Ni-Cd charger DW9116 did not present any problems. The test discharge cycle at around 1A current load lasted 4 hours - until battery voltage dropped to 15V (or 3V per cell). This translates to 4Ah capacity, not 5Ah as advertized. I did only one discharge test, so I cannot say my result is 100% correct, bit it is much better than original Dewalt XRP battery at 2.4Ah and light years ahead of available Ni-MH replacements. This battery charge will last a long time.Charging a fully discharged battery took about 2 hours. The charger stopped the cycle while battery was on its 4th light blinking. The battery was not fully charged and measured 19.88 V. Pushing the battery test button lights up all 4 lights, but fully charged battery is at 20.3 V. Removing battery from charger and putting it back will put additional charge in the battery until battery circuit will cut it off.If you want your Li-ion battery to last, do not keep it fully charged or discharged for a long time. It would be most happy stored at about 50% charge. Charge it just before you need to use it. So far the battery looks and performs very well, but time will tell the full story.P.S. It is October 2021 now and I have used the battery quite a few times. The performance is still very good and I like the fact that battery does not loose its charge in between uses. It looks like I made a good choice buying this battery and keeping my old 18V drill.

The media could not be loaded. Very disappointed with this battery. I went by the good review that it has but despite having a full charge, it works when it feels like it and it wont when it doesn't. When it works it seems like it is a good powerful battery but then it stops. I have no clue what is causing that.It also had to be pushed really hard to fit into the original Dewalt DW9116 charger and using all my full force to take it off the charger. It really needs all your energy to get it off. I really don't know why a battery like that with so many issues got such a good review?By the way this happened on the 1st try out of the box. This isn't something I've used for a while or something like that. This is brand new never been used. I charged it thinking maybe that can fix the issue but it didn't . Despite having a full charge as I tried to show on the video. I am very disappointed and frustrated because I brought it with me overseas thinking I purchased the best battery but now I have to figure out how to ship it back to Amazon and get my money back. Stay away from this battery.P.S. I also had a video about the charger but unfortunately I can only upload one video with the review.

Just received this Lithium-Ion battery a few days ago. It is lighter and last longer than any other replacement batteries that I had before. The same factory charger charged fine. The 4 LED indicator is a nice feature that I don't have to guess amount of charges left.

This is a great replacement for my 18v Dewalt battery. Unlike cheaper options, this fits smoothly into my drills and has plenty of power.

I have a couple of the OLDER DeWALT 18V Ni-cad tools. The Ni-cad batteries have become stupid expensive! The after-markets aren't worth your time. So out of frustration I have decided to "try" these, due that they charge on my Ni-cad chargers. So far , so good,, they have good run time. and of course Lit-ION run strong until they just QUIT. SO far, so good. So I'll see haw long they last.UPDATE:!! Purchased LESS than a YEAR AGO! All of a sudden DEAD! If you look at their MASSIVE WEB Site. NO ABILITY to contact a customer service to determine IF their is ANY Warranty... THEY should last longer that this. I AM NOT a daily contractor, just a HANDYMAN. So I don't use everyday!

Buen precio

Hay que ver como se comporta con el tiempo