1 X Inflatable Moon Walk Bounce Bouncer House Repair Patch - Tear Aid 6" x 12" Patch A

I purchased these to repair a bunch of large holes in my kids miniature bounce house from it being eaten by mice when it was left in the shed for a few months without use. All the holes patched up great, the jump uses water as well and no problems with that either. Once they are stuck they are stuck for good on there. The patches can be cut to all different shapes and sizes that you need and you don't have to worry about messing with messy glue or anything.

I had (3) holes in our moonbounce from a mouse due to leaving it outside for too long. The holes were fairly large around 3" in diameter. I was able to cover the holes with about a 1" overlap on each. I had to put some plastic as a backing for the hole otherwise the patch would have stuck to the inside part of the moonbounce. Our moonbounce has a waterslide with water sprays. I was able to re-inflate it, turn on the water and get the patches wet an hour after repairs. Very sticky. Great stuff.

Worked a treat. I have probably a 14" rip in my bounce house and this item covered around 12". I cut off a piece of it and layed it long ways across the tear and it covered it all up. Had my two kids go on it to test it out before a looming birthday party, and it held nicely. Confident, we took the house to a friends to use for their kids bday party, and with kids pumeling it for 3hrs straight, it held up (and there were kids who were bigger than my two (3 & 5). So overall, very happy with the purchase and would recommend to anyone. Hell, cheaper than a $200 replacement!

Followed the instruction, few hours latter the sticker came off, may be because the type of the Fabric ?! ...

I have a Blast Zone alligator inflatable waterslide that is tearing at the seams and got a couple holes over the years. I really didn't think this would work but it totally does. Its so easy to cut to size and apply and its amazing how well it holds, even with the water hitting it. I am so pleased with this product, I am buying 3 more sheets to start covering the seams that are pulling apart from age and use. Great product... works perfectly.

I purchased this patch for my kids bouncer (purchased from one step ahead company). The patches that came with the bouncer were not very sturdy so I purchased these patches for "bigger" bouncers. Worked wonderful! patches hold very well.

We had an airbed with a hole right next to the seam and pump. We nearly tossed the bed because we had tried the usual: duct tape and super glue (ha) and neither worked. But it being an $80, self inflating, twin bed, I wasn't ready to give up! I did my research and ordered this, I am so happy I did! It was very easy to apply (but yes, once you peel it, be ready to place it because it is super sticky!) I made my cut so that it would have two inches in every direction surrounding the cut. It also had to go over a bit of the plastic pump part (the tear was in a really unfortunate location). However, it still worked perfectly! We let it sit for the recommended time and we haven't had a problem since! We even had a tall/heavy friend use the bed a week later and it held up just fine. I am SO glad I spent the money on this instead of throwing out the bed or even replacing the bed. Definitely recommend.

The first time I order this item and used it on a bounce house and a water slide it worked wonderful. When I reordered it through Amazon I was forced to order from another company. When I used the patch from this other company I followed the directions exactly as instructed and did not obtain the proper bond. I was very disappointed and felt it was a waste of my money