PrimaCreator EasyPrint 3D Printer Filament - PLA - 2.85mm - 1 kg (2.2 lbs) Spool - Black

The item I received clogged our printer multiple times in a very short time period, I think I've only had it for a week or two.After the most recent clog, I wondered - What's going on here? Is it the nice shiny finish or some additive, coming off and clogging it up?Eventually I got around to measuring it, and in multiple places, the shortest diameter we could reach was 1.79, with multiple points being as wide as 1.89.When I say it clogs our printer, I don't just mean clogging the nozzle, I mean it literally cant pass through the printer at some points, and gets stuck somewhere below our extruder gear but still well above the nozzle.When it works, it really, really turns out looking nice, I love the finish on it, but I'm going to have to stop using this filament because of the headaches it's caused with our printer clogging frequently

I'm running this on a TEVO - settings of 210/50 for extruder and base. This configuration is what I use for most prints and it works well. First impression is that the spool is very well wounds, it's very consistent so that is a good sign. However there are notable issues. The first one is the color. It's very matte. To call this silver is a stretch. I considered returning it because I wondered if it was mislabeled. I've tried many "silvers" and "metallics" and "silks" so I know that I shouldn't always expect an actual metal finish. This has none. Second - I've got a clog as well as some others have documented. I didn't check the tolerance but it's a likely explanation.

I haven't had a chance to print with this material much but I caught it on sale, so I got 3 rolls worth of material for the price of 2! That is a good deal and even if print quality isn't amazing (haven't verified yet) I would still buy for prototyping purposes.

Almost through the entire roll of filament. It has worked great except for once it did snap mid print (between the spool and where it went into the printer). Not sure if it was due to us recently moving the printer and the filament possibly getting jostled/tugged on a lot or not. Will definitely purchase again though for future prints.

The filament is incredibly well spooled and the wheel has convenient indicators for how much is used. The quality of prints is great but not the best I’ve experienced. I’d be interested in giving the prima premium PLA a shot if they were offered on the US amazon site.I also need to stop getting light grey filaments. It’s subjective but they tend to be too light colored for me.

It may be fine if you plan to use it immediately, but I wouldn't recommend it for long storage.

After running through a few different brands of PLA I have to say that this filament printed way smoother than I was expecting. If you are looking for good reliable filament I would recommend this brand in black, since that is the one I tested. However, the price jump from $19.90 to $29.90 seems a little disappointing. But if you are looking for a reliable filament than this would be it.

Very smooth prints. I found it prints best at 200 to 205 C. I have tried several brands of white filament with different levels of success but this filament has given me zero problems. I've used 6 rolls so far (and I am ordering a new one today) no issues whatsoever.Only complain I have, not the the filament but with the manufacturer, is that they do not offer more colors. I run a 3D printing business and I need variety of colors. I've tried this white and the blue. I will be purchasing red from PrimaCreator as well.

Das Filament ist sehr sauber aufgewickelt und lässt sich mit meinem Anycubic Mega-S sehr gut drucken, Ich drucke es mit 202°C Hotend und 62°C Druckbett Temperatur. Die Haftung ist völlig ausreichend, die Farbqualität ist durchweg auf dem gleichem Niveau und gut durchgefärbt. Was mich persönlich stört: Das Filament ist mir bereits zwei mal gebrochen und die Trommel hat sich mehrfach am Rollenhalter des Druckers verklemmt. Genau das habe ich leider beim ersten mal nicht gesehen. Grund dafür sind kleine Nasen an der Ausenseite der Trommel (siehe Bild). Diese verkanten sich untern am Rollenhalter und blockieren so die Trommel. Ich hab das jetzt simpel mit einem selbst gedruckten Abstandsring gelöst, wodurch die Rolle nicht mehr bis an die Seite des Rollenhalters rutschen kann.Das wäre seitens des Herstellers recht gut abzustellen. Schade eigentlich, denn nur deshalb gibt es von mir "nur" vier der fünf Sterne.

Anfänglich war ich enttäuscht, da das Ergebnis eher mangelhaft war, viele Fäden, "körnig" usw.Nachdem ich aber das Filament auf ca. 40-50 Grad "backe" und es auch während des Druckes in einer Aibecy eSUN eBOX 3D Druck Filament Box auf ca. 40 - 50 Grad belasse sowie auch die Druckeinstellungen angepasst habe - die Düsentemperatur eher an der unteren Grenze und die Betttemperatur so um 65 -68 Grad und keine Z-Achsenhebung während des Druckes - ich drucke mit Ender 3 Pro - habe ich tadellose Kleinteilmagazinboxen, ohne viel nachzuarbeiten.

PLA-Filament ist sehr sauber gewickelt und druckt akurat.Hilfreich ist das mitgelieferte Datenblatt (nicht nur ein Aufkleber auf der Spule!),das sämtliche zur optimalen Einstellung benötigten Angaben enthält,damit fällt die Ausprobier- und Anpassungsphase weg.Verpackung und Versand absolut ok, oberer Standard.

Habe dieses PLA zum Sonderpreis von 14€ gekauft. Als Neuling im 3D-Druck habe ich mich noch nicht auf eine Marke festgelegt und probiere munter herum. (Eryone, Sunlu, Geetech habe ich bisher probiert).Mit meinen Standardeinstellungen habe ich keinerlei Probleme. Heattower war nicht nötig. 200°C Nozzle, 60°C Bed @ 0,4mm funzt einwandfrei!