






Desertcart purchases this item on your behalf and handles shipping, customs, and support to Vietnam.
🦴 Elevate your tone with the bone standard every Les Paul player craves!
The Musiclily Pro 44mm Standard Flat Bottom Slotted Bone Nut is a premium replacement part designed for Gibson Les Paul guitars. Made from real bleached bone, it offers precise 36.2mm string spacing and a 44.07mm length for a perfect fit. This pack of two nuts ensures durability, improved sound quality, and reliable performance, making it an essential upgrade for serious guitarists.






| Product Dimensions | 4.41 x 0.5 x 0.93 cm; 10 g |
| Item model number | MX1004-2 |
| Back Material | Bone |
| Colour | Les Paul Style |
| Top Material | bone |
| Number of Strings | 6 |
| Item Weight | 10 g |
L**Y
Brilliant
Absolutely brilliant. Fits the guitar perfectly which makes for a better sound. Good value.
B**B
Perfectly good replacement nuts for acouple of quid each, and comes with a free Plectrum!
Pack of 2 guitar nuts were perfectly suited for my guitars. After a little sanding and shaping, the nut is nice and snug and perfectly stable without glue (NOT recommended, I just didn't have the correct viscosity of Superglue for the job, but they will be getting glued in very shortly). The nut slots are not cut very deep, so the strings are held a good distance from the fretboard and will allow for plenty of wear. This means little to no string buzz on the lower frets, but if you need the slots a bit deeper they can easily be filed deeper with a nut file. If you're replacing a nut by yourself, be advised there are no instructions included,so you should already know what you will, and what you may, need to do. That said, I would still advise caution, the nut is more delicate than I anticipated, and will not withstand rough handling, so go gently. If you think the fit is a little tight, but you can gently tap the nut into place, you are wrong, it WILL break (trust me, it will break). If the fit is too tight, sand the nut down some more (always on the back side) until it fits properly. DO NOT force it into place, the fit should be snug rather than tight and it's not meant to be hammered in (apart from anything else, it makes it much harder to get back out again when it eventually needs replaced). These are perfectly good for the purpose they are designed for, when they are back in stock I will definitely be buying more. You never know when you will break or wear out a nut (and you will do eventaully), and I have another, brand new, guitar where the nut slots have been cut too deep at the factory. I don't want to use the old Superglue and Bicarb trick, at best it's only a temprary repair, so I prefer to just replace the whole nut. It's only a fiver for 2 nuts at the end of the day. Curiously, the decription states the nut is made of bone but the packaging stated it was plastic. However, the nut I broke did not break the way plastic normally does, it had no felxibility in it, so I think they are actually bone nuts.
K**N
Good value
Good value easy to fit if you know what you’re doing!
J**S
Awesome
Awesome
Z**N
Fitted 9.5 radius Fender Strat
I had to sand the bump at the bottom off as well as a little bit from the sides. The width was perfect and I just need to polish it with the four sided nail buffer. Looks great and sounds much better than synthetic nut material.
C**S
Great value
Great value
S**N
Useless don't fit Epiphone les paul
These nuts are 1 mm too narrow for Epiphone les paul and the string slots are cut for a wider neck guitar so a waste of money. I could adjust the string slots but I might as well have started with a blank nut. Fitting a 1mm shim wasn't worth the effort. So they ended up in the bin.
G**D
Bone for tone
Fitted in perfectly with a Squire affinity telecaster. Now sounds much brighter
J**V
Bon rapport qualité prix
Bonne qualité de l'os, pour un prix correct pour 2 sillets 👍🏻 En poncant un peu les bords et en creusant les rainures pour abaisser l'action sur les premières cases, je suis arrivé à un bon résultat. En fait, ce sillet me sers pour une Gretsch Jim dandy, de 43mm mais je souhaitais un espacement plus large entre les cordes, ça rend super bien !
J**A
Te ahorran mucho tiempo
Las cejuelas están bien. El hueso no es el de mejor calidad pero cumple su función. De precio está bien también. Te regalan una púa de las malas. Vienen ya con los slots para las cuerdas. En mi caso, le quito el saliente central que trae y le ajusto la anchura para que quepa en la ranura de mi tele o mi strato…luego le ajusto la profundidad a las ranuras. Finalmente las pulo para darles brillo.
L**E
Attention à l'espacement entre les cordes
Bien que 44 mm, les saignées sont trop large pour ma guitare "Vintage". Heureusement que le sillet est suffisemment haut pour le retravailler et refaire le passage des 6 cordes. C'est bien de l'os et pas du plastique.
A**T
Unfortunately Made in China
Didn't know these were made in China. Just a personal preference not to buy anything from China if I can help it, and would gladly pay extra for something made in the EU instead. My fault for not asking prior to purchase but There are 2 nuts in the package, plus one guitar pick. I'm just really disappointed these things come from China, because who knows what they actually are made of (dog bones? some radioactive material?). 2 Stars because of the China thing. 5 Start if these were made in the EU instead.
R**R
Schnelle Lieferung und perfekte Lösung
Der Sattel hat perfekt gepasst. Die Nut für die Saiten musste natürlich mit einer Dreikanntfeile angepasst werden. 0,6 mm Abstand zum ersten Bund haben da alles erfüllt. Meine Button Rouge klingt wie neu. Bin sehr zufrieden.
Trustpilot
1 month ago
5 days ago