EZDIY-FAB 120mm Dual Frame RGB PWM Fans for PC Case,Addressable RGB Case Fan with Fan Hubs,5V ARGB 3-pin Motherboard Sync,ASUS Aura Sync-5-Pack

Very impressed with these fans, especially for the price Bright lighting, decent airflow, not too loud and look great when installed. The controller is very handy too. I used 2 of the RGB ports for the fans and linked them together. This left me with 3 other ports for my 5v components, meaning the controller ended up being my RGB hub! Would definitely recommend and will likely be buying again for my next build.

Very nice fans considering their price, instantly synced with MSI Mystic light and aren't not super loud either. I've used all five in my build (on top of the three non PWM fans in the front of my case) still very lttle noise generated. The hub is also nicely made and very easy to set up. I'm very pleased with my purchase.

Summary Do I recommend these fans? YES - if you have a 3-pin motherboard. Or don’t care about a specific lighting theme. If you get them, then I strongly recommend getting stronger double sides sticky tape. Don't rely on the one provided. NO - if you want a specific theme AND have a 4-pin motherboard. if you’re looking for fans that look cool and have optimisable functions for temperature/ noise. If you want those functionalities you can’t rely on budget ARGB/RGB fans. Invest in something like HUE2 with Corsair or AER RGB 2 NZXT. Pros: 1. Price and value for money. 2. Quality of the build feels really good and they don’t look tacky budget fans. 3. Bright LEDS on the fans. 4. ARGB - if you have a 3 pin rgb header on your motherboard otherwise... 4.5.100s of selections of lighting setups. 5. SATA powered so didn’t have to go in my PSU box looking for a Molex cable! 6. Easy installation. 7. Simple and effective packaging. Cons: 1 (ish). Doesn’t support 4 pin ARGB (which I mean doesn’t really count but I’ve seen a few comments of people making this mistake like me (: oopsies). 1. A lot of wires to manage which can be a headache for some people. Or if your case isn’t very cable manage friendly. 2. The sticky double-sided tape proved in box is so bad. it fell off my computer within literally seconds. If you want to get this get something stronger. Would be great if it was magnetic but at this price you can’t really complain. 3. I only needed 4 out of the 5 fans and they did sound quite loud. If you wanted to adjust the speed you cannot do it with these fans. 4. I personally didn’t see much difference in case temps with or without these fans. Idle it was certainly cooler but with heavy use of my comp the difference was marginal. I did do research on the case I have (NZXT 500) and extra fans don’t make really any difference. But my goal wasn’t to make my case "cooler" in temps but "cooler" fun funky lights. (I’ve provided an image that shows how they looked in my NZXT H500 case near to the end of by build but I had to remove them as they didn’t provide the functionalise that I desired. hence no fancy finally looking build :L)

Great fans not overly loud, seems to do the job well and look brilliant., had one that rattled a bit but within a few days they had sent me a replacement, Brilliant fans at a great price and great customer support, a no brainer buy.

This turned out better than i expected 😁 i bought a set of 5 for myself and it looks soo good with the rest of my build. I have been so long to build my pc and this made it look so much better. I love it. I also bought another set of rgb fans as a gift for my friend which is also from this company which also added awesome colour and better cooling to his pc. EZDIY-FAB 3-Pack 120mm RGB Case... https://www.amazon.co.uk/dp/B079G11HM3?ref=ppx_pop_mob_ap_share This was the one and he really likes it too. He damaged the remote and after explaining the situation to them they kindly sent anogher remote which was really nice. If you want to add some nice colours to your pc and keep it cool then both fans that i bought are perfect

They move plenty of air and the ARGB is amazing. They are a little loud but I wouldn't complain as they are so cheap for what they are. Since they are PWM it's easy to adjust them to a comfortable noise level, the PWM makes these fans worth it. I would definately buy these again.

Great fans if you want ARGB on a budget. They look a little different with the dual frame design and push a decent amount of air. Included RGB controller/fan hub is actually really nice and can be connected to your reset button to control the modes. Or your motherboard directly (ARGB header only). Ain't no Corsair fan but at less than half the price I'm happy. In an ideal world I'd want them to push a little more air (Even at the cost of noise) just in case I wanted a little more cooling. High RPM version would be great.

this is the second set of the exdiy fab 5 pack i have purchased for builds, overall the colours are good, and air movement is satisfactory. setup is easy with plenty of argb headers and a 5 fan hub all built into one unit, a fairly tidy design. unfortunately this second set seems to have an intermittent glitch which makes the light cycle reset every so often, i also began experiencing the blue screen of death.. which i have since narrowed down to the 3 pin led motherboard interface for the rgb controller. after removing the rgb controller from the equation there is no more bsod!! i will be looking to return this set for a replacement which means stripping out 2 radiators from a built system, slightly annoying to say the least. a shame as visually the fans look amazing for the money, without the issues these would have gained a 5 star rating.