Replacement Carbon Brush Holder Brush Card Assembly for M18 18V Hammer Drill & Impact Driver Accessories Compatible with AEG Milwauu-kee 22-22-1640, 22-22-1550，2650-20

Works perfectly

When my 15+ year old hammer drill started to not turn on reliably I was tempted to replace it with a new one. I decided to take it apart and clean out the concrete dust and sawdust and discovered my brushes were at their bases! If I held them in it worked perfectly. This replacement brush assembly saved me significant $$. It fit perfectly, simple to desolder the old and solder in the new and …TADA …. a like new drill. Thanks!!

works fine, i ended up removing the ring terminals from the wires and soldering them to my existing wires. It was less disruptive to the trigger, plus I did not need to measure wire lengths.

Great service

A bit difficult to install, wish they made connecting the wires easier.

Bought this to replace the worn out brushes on a Milwaukee 1/4" 2650-20 impact driver. Perfect replacement! I did have to adjust the brush holder as it was a little tight and the brushes would not spring back. Simply done with a flat head screwdriver to spread the holder apart a little bit. I removed the old brush assembly, unsoldered the wires and reversed that for installing this new one. Worked great and I should get lots of life out of this. For the price you cant beat it!

My old Milwaukee 2602-20 hammer drill was getting tired. I ordered this replacement brush set and it fit right in. Comes with longer wires so you can cut exactly to size needed. After soldering the wires to the switch connectors and cleaning/ resetting the motor and plate assembly, the old M18 Hammer drill fired right up again and works great. Thank you.(Their are youtube video's with helpful directions for this repair.)

Check for free Movement of Brushes In Holder. One of the 4 was Stiff, would not have touched Commutator. I had to slightly Bend the holder to make brush slide Freely under Spring. After Tweaking Brush holder my Drill Works. The old brushes were plum worn out. I opted to Solder the old wire on instead of using new screwed in Wires which would have required more disassembly. You'll need a powerful soldering iron to do it my way. 4 stars because of the sticking Brush, otherwise It Works. It Fits.