HUANUO Single Monitor Stand - Gas Spring Single Arm Monitor Stand Desk VESA Mount for 13 to 32 Inch Screen with Clamp, Grommet Mounting Base

I was a bit 50/50 on these VESA mounts when I was looking at them on Amazon. Fortunately, they were on sale when I got them and so were at a comparable price to another option that had a lower weight capacity.So far, I am pleased with the results. I set them up in using the C-Clamp mounts that are included, because the mounting plate for the alternative grommet mounting was far too small for the cable holes on my desk. Your millage may differ, the cable holes on my desk are 2" deep by 3.5" wide, larger than the mounting plate.Set up is relatively easy and does not require anything other than what is included in the box. However, be aware that you may need the standoffs and long screws for the VESA mount if the bracket is recessed into your monitor like on my Dell S2721DGF. My LG Ultra Gear LG32GP850-B just cleared the quick mount bracket, but the release for the stand it came with does interfere a bit and needs to be pushed out of the way. An almost three handed operation, but more an issue with the monitor than the mount.The mounts are sturdy enough and are holding almost ten pounds each easily with no adjustment. They are stiff but tightening bolts can be backed off or on for adjustment. It would be nicer if these were thumb screws like on the back of the VESA bracket but it's not something that I'm going to be messing with regularly.I'd knock off a star for build quality, lots of plastic, but for the price I'm not expecting all metal.Cable management in built into the arms, nice plus there. Each swivel point works exactly as you see in the product page, and I've had to do little adjustment once I got them assembled and the monitors mounted.Biggest upside to these mounts is how much space I saved over the old stands that these monitors came with. Both Dell and LG gave me stands with massive footprints on my desk and now I have all of that space back to use. Definitely worth picking up if you have a 32" or smaller monitor. Larger may work with the rated seventeen-pound capacity. However, be aware that at full height I have seven inches of clearance from my desk to the bottom of my 32" LG monitor. Larger ones will have less, and you may want to consider a different mounting option even if your monitor falls under the weight capacity.So far, I can recommend one, or two in my case.

The plastic surrounding the arm got broken in shipping. I had to return right away. I am hoping the force required to break it does not happen again. Waiting for replacement. The replacement came very quickly, and I am happy with the product

I don't normally write reviews for my purchases, but I do find reviews very helpful in deciding on my purchases. I purchased this arm to attach my Huion Kamvas Pro 20 to so it is easier for me to use, I have a small workstation and don't always use my graphics tablet, I still like being able to use my mouse and keyboard even when I am working on my tablet.This arm enables me to swing it in and out of my desk as per needed. The supplied stand for my Kamvas just din't work well for my setup due to lack of space, and I could't use my mouse and keyboard very well with it like that. I was really dubious whether this arm would work for my situation, but it does it also allows me to rotate my tablet when I am drawing on it which is really helpful in certain situations.The cable routing option also is a blessing in my situation and it keeps the three cable's I need to attach my tablet to my laptop and the power point tidy and out of the way.So, if you are looking for an arm to attach your graphics tablet to this is a great choice, I don't know if it would work so well on any of the larger sized tablets than mine, but it would definitely work on any of the smaller versions.I hope this review will help anyone looking at this for a similar situation to mine.

I bought a bunch of these for my work. It support up to 32 monitor. All the monitor at my work are LG 32 in and under the weight specified. They are holding up, but there's a slight bend to them where the monitor is attached, forcing the arm to leaned towards the monitor (not straight). So far it isn't an issue, but I did have to tightened a few of them to prevent the monitors from dropping. We'll see how they will hold up with more usage.

If you have a desk with a metal frame under the wood, you'll need a small wood block. The instructions say use a piece of wood or book.. dont use a book.. After finding and sanding a block of wood to be the equal height of my frame rail edge to bottom of the wood, I finally was able to firmly clamp it down with equal pressure underneath. You want the clamp cup on the bottom to have a flat area to tighten to, on modern desks, the frame rails are close to the edge and it wouldn't be stable unless there's an extra block next to the rail. It works perfectly and holds my old heavy monitor fine. My only issue is the whole wood block issue for certain desks and it doesn't go up as high as I thought. I wanted to use my laptop under it, but my laptop screen still sits higher than the bottom of my monitor. Otherwise it's well made and I'd recommend.

Quick note, I do recommend to have your own philips screwdriver or set of screwdrivers as the tool included is annoying to use This is very sturdy and can hold my 17 lbs 32 inch monitor quite well. The range of motion is good but because the way the gas spring arms are designed, you have to shift the base and top of the arm to get the right length away from the wall. I’ll add a picture because I have to have the arms adjusted at almost right angles to control the tension and direction. The assembly is super easy. It comes with both materials for off the edge and grommet for anywhere on your desk. I chose the grommet and made 2 holes with my drill to place my arms by the corners of the desk. Overall, I’m very pleased with the arms as it gives me more space for my desk work. I’d consider getting one with a pole to place a third monitor on top in the future.

Will not hold 28' monitor. Wobbles with max tightness.

This product is a piece of **** I ordered this monitor arm and went to assemble it. However, the hydraulic or gas tension arm had 0 tension at all. Even when i adjusted the screw it did not hold my 27 inch monitor. I k ow for a fact its not the monitor weight because The arm wont even hold a cup of water up. Did I get a defective monitor arm? Maybe but dont take your chance with this cheap piece of **** just get a more reputable one thats what im about to do. Not even worth my time to return this piece of ****

The product advertises capacity for 32' monitor and 14.6lbs weight. Not true. The curved monitor i have weighs 11lbs but it fails to hold the monitor up. The monitor keeps "bowing"However it costs 35$ so if your monitor is light it is good deal. Just ensure you leave plenty of leeway

The monitor seems good for small monitors but it could not handle a 32 inch monitor well under the described maximum weight. I tightened it a LOT and it still couldn't stay in place.If you have a small and light monitor: potentially could work well but avoid anything above 12-13lbs or 24/27 inches (I'm taking a guess here since it could not handle 15lb).

If It was not for the fact that I found the bolts provided were not the same size and the C-Clamp was small, this would of been a 5 star rating. Overall I am satisfied with this product, the adjustments can be made with very little assistance and keeps its position and does not sink or rise when left alone - Very Secure and looks slick. The only qualm about this product is the C-Clamp is so short that it did not work with my desk, unlink my other Dual Monitor set-up from the same company. I did have to modify it and Bolted the stand directly to my desk without the clamp portion (Since it didn't fit) - Which honestly makes it completely secure and the holes are on the backside of the desk, which I don't see, perfect peace of mind. This was a very high quality product in comparison to competitors. The stand has allowed me to synchronize the height of all 4 monitors at an ergonomically appropriate view point (Including my Other Monitor Arms) (I'm 6'2) and the final job to achieve this was the laptop which was my main screen, and staring down always hurt my neck. This has solved my problem! Great product and highly recommend, however, keep in mind how thick your desk is, if you don't want to have to bolt it directly to your desk! Even knowing the C-clamp wouldn't fit, I would still make the same decision. Very satisfied. 100% Transparent Review.

This arm was one of the lowest cost out there and seemed to be offering more than it was capable of for that price. But when I got it, assembled it and hooked up my monitor(s) (actually tried 2, a 24" and a 27" and both were great), I was thrilled at the quality and how much was offered for the low price. There is hardware to mount in 2 different ways (clamp and hole), extra hardware for mounting on a curved back display and nice touches like a bracket that you mount to the VESA holes on your monitor and then can slip the whole thing onto the arm! No more balancing the monitor while you screw in the bolts. Very nice product.