UGREEN HDMI Switch 4K@60Hz, Bi-directional HDMI Splitter 2 In 1 Out, hdmi Switcher Support 3D HDR10+ HDCP 2.2 Compatible with PS5 PS4 Xbox One TV Box Laptop HDTV Projector Monitor

Excellent value for money, works really well and good quality outputs. Easy to install and operate.

This works really well and makes life so easy if you have one monitor and you have two computers,for example one is your work computer and the other one is your private one. So reasonably priced as well.

Good quality but does not automatically detect when each device is switched on to automatically switch between the two as was implied. I'm using one of the latest Samsung smart TV.

I bought this switch to use it in the following scenario: 1 monitor connected to 2 computers, one at a time. (no other configuration have been tested) First impression is that it is really really small! The connectors are really tight fit (in a good sense) and they do not wobble or feel loose or lose connectivity when you move the cables. The button feels "light" but registers the click all the times (no missed clicks). One disadvantage (by design) is that due to the small size the HDMI connectors are not on the same side but it has 2 connectors on the left and 1 connector on the right, which combined with the non-flexible HDMI cables takes up about 10-15cm before the cables can be wrapped around themselves so it adds about 40cm of cable mess. Probably not a big deal if this is stashed away, but probably this switch lives at hand reach so the cable mess is in your face. it is not heavy enough to keep the cables from pulling it away. Regardless the cable mess, here are some interesting facts i discovered: - there is no designated input 1 or input 2 so it seems that they are equal...but.. - if only 1 input has video signal, there is preference which input is auto-selected (that is, if video signal is present only on input A then this is shown on the monitor without clicking the button, but if video signal is present only on input B then this is NOT shown on the monitor automatically, you need to click the button). So in my setup, the desktop PC is in what I consider input A and the laptop in input B so I can disconnect the laptop at any time and auto-switch to the desktop. - if both inputs have video signal and input B is selected, disconnecting the cable of input B, it does not auto-select input A (in constrast to the behaviour above!) (same case with input A - there is no 'switch to next available video signal' in any case) - switching between signals is not instant, it takes about 10-12 seconds - depending on the connected computer and OS, turning on the computer without first selecting the appropriate input on the switch may or may not be an issue. (it it the equivalent of turning on without a monitor connected). - works fine with the resolutions of my computers (2560x1440) and laptop (3072x1920) without weird flashes on switching. No degradation in image quality or colour. No weord image artifacts. -

I have a couple of these in use one for the living room TV and computer the other for my 2 computers and on monitor both work fine and the only gripe is it doesn't remember which item was last used so have to manually switch over. the clarity is fantastic on issues the build quality looks great and reliable at a great price all in all very pleased

Does it’s job very well and haven’t seen any picture quality issues

I bought this to connect 2 4k monitors to a Mac at 60Hz and a PC at 30Hz and hooked them up no problem with some HDMI cables I had round the house and it worked like a dream. Well, sort of. I noticed I'd sometimes get some intermittent flickering--something other reviewers have mentioned--but I investigated and it only affected the Mac but stopped if I dropped the refresh rate. The issue was not the switch but rather the cables, one or more of them just didn't handle a 4k 60Hz connection. I replaced the cables with ones rated to 8k (or 4k 120Hz) and the switch has been solid as a rock since then. Some might argue that it should come with cables, but I disagree, even though I fell foul of it. This is a cheap box and really, you want to choose the right cables for you, length etc so I think this is good. You just need to know that if it flickers, it's probably your cables rather than the Switch.

I used this as a 1 in 2 out splitter for my Xbox Series S. This worked perfectly for the first few months, albeit occasionally cables would need unplugging/replugging to get signal. But now it triggers screen flickering every 10 minutes or so not only when you're playing the Xbox, but if the Xbox is turned on then other unrelated HDMI inputs will flicker too. Removing the splitter immediately solved the problem. Update - I later tried to use this in another completely different setup that drove a PC and a PS4 into a portable monitor. Same problem, would flicker multiple times when input is first shown and randomly while it was running. I have opened it up and found the MUX/DEMUX switching function is operated by a Texas Instruments TS3DV642, which is supplied by a simple AMS1117-3.3. I am not very familiar with these types of circuits but at first glance, there appears to be no pulldown resistor on the HPD (hot plug detect) line, which is therefore left floating. I think this probably explains this behaviour. I have attached pictures of the board.

Ottimo prodotto non ha bisogno di alimentazione usata per collegare monitor a PC e Amazon Fire Stick

Dieser bidirektionale Switch von UGREEN ist die perfekte Lösung für alle, die Ordnung in ihr Kabelmanagement bringen wollen, ohne bei der Bildqualität Kompromisse einzugehen. Performance & Stabilität: Die Unterstützung von 4K bei 60Hz läuft absolut flüssig. Ich konnte keinerlei Signalverzögerungen oder Bildrauschen feststellen, was bei HDMI-Umschaltern oft eine Schwachstelle ist. Die Synchronisation zwischen den Quellen erfolgt angenehm schnell. Bidirektionales Feature: Die Flexibilität, das Gerät sowohl als "2-in-1" (zwei Konsolen an einem Monitor) als auch als "1-in-2" (ein PC an zwei verschiedenen Ausgabegeräten) zu nutzen, macht es zu einem echten Schweizer Taschenmesser für jedes Setup. Bauweise & Design: UGREEN-typisch ist die Verarbeitung erstklassig. Das Gehäuse ist kompakt und unaufdringlich. Die Status-LEDs sind klar erkennbar, leuchten aber dezent genug, um im abgedunkelten Raum nicht zu stören. Handhabung: Der Druckpunkt des Umschalters ist präzise und wertig. Besonders positiv hervorzuheben ist, dass keine externe Stromquelle benötigt wird, was den Kabelsalat auf dem Schreibtisch effektiv minimiert. Fazit: Ein technisch einwandfreies Tool, das genau das liefert, was es verspricht. Wer eine zuverlässige, kompakte und optisch dezente Lösung für sein 4K-Setup sucht, macht hier alles richtig. Absolut empfehlenswert!te Qualität.

Een prima switch. Hij werkt zonder extra voeding, gewoon met de HDMI-kabel. Hij kan niet met twee bronnen tegelijk werken; je moet kiezen tussen de eerste en de tweede. De overdrachtssnelheid is zoals beloofd. Over het algemeen ben ik tevreden.

Très bon produit, fait le job. 2 entrées pour une sortie, fonctionne très bien.

TV üzerindeki mevcut iki adet HDMI girişe dört tane cihaz bağlamak için iki adet UGREEN 2.0 standardı switch satın aldım. Switch çıkış yönü kablosu kendi üzerinde değil, onun içinde ayrıca bir uygun hızı destekleyen HDMI kablo satın almak gerekli. Switch üzerine bağlanan kaynakları seçmek için üzerinde manuel kontrol butonu var. Hem Apple TV, hem Play Station - XBOX ve Nintendo oyun konsollarından oluşan dört cihazı, iki HDMI girişi olan TV'ye, 2 adet satın aldığın UGREN HDMI switch ile bağlamış oldum. Yine iki adet HDMI girişi olan TV için eğer üç adet HDMI cihaz bağlanacak ise; bir tanesi direkt TV üzerine, diğer iki cihaz ise yine TV deki ikinci HDMI girişe takılmış olan bu Ugreen HDMI switchin üzerindeki iki girişe takılarak gerçekleştirilir ve bunun için de bir adet Ugreen HDMI switch cihazı almak yeterlidir. Gayet düzgün şekilde çalışıyor, sonuç oldukça başarılı. YORUMA 1 NCİ REVİZE : Yaklaşık 1,5 aylık kullanımın sonunda, Apple TV kutusundan giden sesler pütürlü çatlak çok kötü şekilde çıkmaya başladı, Switch üzerindeki Hdmi 1 ve Hdmi 2 arasında bir iki kere geçiş yaptığımda düzeliyor, ancak ses konusu kararsız. Aynı switchin kablolu olan modelini de satın almıştım, değiştirerek onda da denedim sonuç aynı, hdmi 4K Ugreen yeni aldığım kabloları taktım, sonuç yine aynı, bu switch ünitesini takana kadar yıllardır seste hiçbir sorun yoktu, o nedenle cihazın kendisinde olduğunu değerlendiriyorum, belki benim konfigürasyonumda netice böyle olmuş olabilir fakat Belkin marka yıllardır kullandığım dışarıdan ataptörle takviyeli diğer switch de sorunsuz çalışıyor. O nedenle bu Ugreen switch lerin öyle çok muhteşem olmadığını düşünüyorum, ancak maçı idare ederler, benim deneyimim; seste çatlama ve bozukluk olduğu anda, üzerindeki birnci ve ikinci hdmi arasında butona basarak geçiş yapıyorum bir iki kere, sonra düzeliyor.