Richmond Modern Farmhouse Sliding Barn Door TV Stand for TVs up to 65 Inches, 58 Inch, White and Rustic Oak

Great multi-functional tv stand with room for baskets of toys, books, dvd’s and the Xbox. It took a little while to assemble but was straightforward and I was able to do it myself. The color fit our home perfectly and it’s held up to toddlers without issue.

Assembly POV [Not sarcasm I promise] I had a blast putting this barn-door wood-stand together: 1.) It comes delivered to your door in one large box - nuts/bolts/screws, parts, instructions, and panels are all in the same box, nicely puzzle-stacked. 2.) All parts are labeled well - I took the time to run A - Z through all parts as a first step, nicely done. 3.) Instructions are detailed enough for understanding yet concise enough for intuition - drawings make sense and all parts/components match up. 4.) All tools except for a screwdriver are provided (phillips, allen, and some dowels/glue are the main fasteners). Notes on Assembly: 1.) This set takes time to put together. Block out at least 4 hours worth of time, double that time for a leisurely pace. There are multiple components, some components take adjusting, and gluing is involved. 2.) The package altogether is heavy, and parts get cumbersome without additional hands. I would recommend two people carrying this inside together and having a lot of open space available during assembly (maybe the kids can be out that day). Try not to fight over who gets to do what. 3.) The components and parts are alphabetically labeled. However, due to puzzle-stack packaging, the components come in a hodge-podge, out-of-alphabetical order from the box. I would suggest alphabetizing them prior to assembly. The action brings ease to confirming all parts were shipped and makes finding parts when needed extremely easy (pictographs are in the instructions too). 4.) Using an electric power drill/screw gun gets the job done faster and with more ease. (Disclaimer - I went against better judgement. The instructions say not to use power tools, but I kept my drill on a low torque setting. So shush, I like my power tools.) Have both phillips and allen screw bits ready if using power drills - this really saved me time and saved me from getting overwhelmed by the amount of 'screwing' (fastening screws?) that is required. 5.) The gluing is not "optional." Read all of the directions prior to assembly. The kit comes with glue, and I (quite mistakenly) thought it was optional for strengthening joints that look weak. So I had 75% of the stand put together (none of it glued up), and I realized all the little dowels are supposed to have glue on them, end-to-end. I back-tracked and got all the gluing done. (From writing this part, I am coming to a realization that my assembly-time estimation from note 1 might be 30-45 minutes generous). 5.) Have fun with this - the structure is beautiful at the end, the sliding barn-door's really do slide, and slide surprisingly smoothly, and the stand is more than worth the price. Good feelings at the end. (And the family can now at least gawk at a nice structure whilst consuming digital media).

This tv stand is worth every penny. It’s beautifully designed and was really effortless to put together. Obviously it took a little time, but this piece is perfectly engineered and crafted. Everything lined up perfect and tightened up nice and sturdy. You definitely don’t have to worry about this unit feeling like a cheap waste of time. I couldn’t be happier with my purchase. **also please note that the packaging has a wood crate on the inside to protect your item. I returned my first item because this was damaged and I thought my unit was damaged, but I realized when I received the 2nd box that the piece was designed to be damaged to protect the unit during shipping. I wish this was labeled on the box, but never the less I highly recommend this TV stand!

I bought this as a mother's day gift for my mom. I wanted to get one that was already assembled. But all the ones in the store were over $450 up to over $800. And they were not the style she wanted. This one is not real wood... but neither were the expensive ones. This one was a good price and the style she wanted...so I gambled and ordered it. I was afraid I was going to have trouble putting it together. I was afraid after I put it together that it would be flimsy and wobbly and would fall apart during the loading and delivery to her house in a neighboring state. But to my surprise it was fairly easy to assemble. ( for those who refuse to read directions it would be very hard). It probably took me 3 to 5 hours to put it together but I wasn't in a hurry. I really Ike that the doors could be closed into the center with the open shelves on the outside. Or u can push the doors to the outside and have the open shelves in the middle. It is very sturdy and is very good quality for the price. The doors slide good too. I was afraid they would be hard to slide too... Sooo.....long story short....this is a great TV stand for the money!!! Very sturdy...easy to assemble...and has a very nice look to it!! I would highly recommend...

I love this product I was debating between a couple of the TV stands they have and this one matched my coffee table the most and I love the barn door effect. The instructions were super easy to understand you definitely need 2 people to assemble it. Caused a fee arguments but once it was done my bf and I were happy to have it! We didn’t glue the little rods in place i believe if you screw everything in correctly you don’t need to. It is very sturdy and nice looking. Lots of area for games to go. My TV is on the wall so this is just to hide all the cords but was easy to assemble all parts came with it. Even with two kittens we got it done in about 2 hours. Definitely recommend it!

I received this cabinet with a very reasonable shipping speed, considering the pandemic happening at these times. I’m a women in my 50s and was able to assemble this all by my self (for some few steps with the help of my 10 and 12 yrs old children), following all the times and from very close the pictures on the instruction sheets. It was not difficult at all, just time consuming. I did it in two evenings (as mornings and afternoons we are all busy with homeschool). The result is awesome. The cabinet looks so very pretty and my kids like it a lot. I am not using it as a TV stand, but as an extra storage space for food in the kitchen, and found it very useful for this. I can put lots of cans and boxes in the inside. So.... so far so good!!!! Also, last but not least, putting all the pieces together unfortunately one of the parts was defective and could not fit in the whole ting. Luckily was one of the parts that goes on the bottom (the very front base) so it did not stop me from putting all the rest together and make it functional. I contacted customer service by email. They replayed pretty fast, I’ll say like in 2-3 days, from there the communication was very good, friendly, understanding and courteous (so five stars also for the customer service) and I got my replacement also in a very reasonable shipping speed. Result: I’m totally satisfied with this cabinet, set up was good, looks good, is functional, customer service is awesome, it makes my kitchen look nicer and more organized.

If you're looking for a rustic TV stand, this one should be on your list. It's particle board materials, not hardwood. So, for the price it's perfect. Very sturdy and nice looking with barn doors. Does take a little time to put together, and instructions are clear. Would recommend for this price range.

I was apprehensive with this purchase solely based on the reviews detailing a super lengthy build & difficult instructions. With limited building experience, I took a chance and am happy that I did. I was determined that this would test my sanity, but I was actually able to complete this build in less than an hour! I think my lack of experience building actually led me to some “hacks” that sped this process up TREMENDOUSLY. Be sure to read the review in full as I’ll detail everything exactly as I did it. First thing to know - you will benefit greatly with placing parts into piles before beginning. This will allow you to focus on the actual assembly instead of searching for parts etc. toss the furniture stickers as well as there is no need once the doors are on. Set piece 1 by itself ( #1 was not labeled but it was easy to figure out which one it was) this is the top of the tv stand and will go on towards the very end Group together pieces 3,4,5,6 with pieces 7,8,9,10. These are the vertical panels that support the structure. Group together pieces 2,17,18,19 and 20. These are the bottom edge and legs of the tv stand. Group pieces 21 & 22. These are the doors Group pieces 11,12,11 these are your shelves Group pieces 13,14,13 these are the back panels of the stand. Second thing to know - you do NOT need to glue each dowel in place for it to hold together. I found this by accident as I was ready to glue the parts based on other reviews, but the only mention of what to glue appears in P.2 part V of the instructions but the actual building doesn’t begin until P.10 of the instructions. Once you’ve installed all the cam screws it holds the piece together and there are no gaps in the final assembly. One thing I will note: the cam screws in pieces 7&10 on mine were loose because the manufacturer made the holes too big. By step 13 of installing the top it fixed this completely. Third thing to know - this is super important especially if you’re building solo. I credit this as making the whole install a lot faster than expected. DO STEP 10 BEFORE 9. Installing piece 2 into the bottom of the vertical panels 3,4,5,6 made it MUCH easier to install part 15 into 7,8,9,10. I tried following it As-Is but after the fourth time of the panels falling down this made the most sense. It was a breeze after this. Again, after the top is installed on step 13 it made everything fit snug so don’t worry if the panels feel loose after these steps in whichever way you end up doing it. Fourth thing to know - STEP 14 is so terribly awful and unnecessary it’s laughable. SKIP IT. There is absolutely zero point to it at all. It serves nothing, there are no holes already so you’re left to manually screw it into the thin panels which could risk cracking them completely. At first I thought it was to mount it to the wall BUT NO. I’ve added a photo of this step. Do yourself a favor and go straight from step 13 to 15 and toss these plastic wedges into the trash!! Seriously, I wasted a good 10 minutes trying to figure out what the heck they were for. Fifth thing to know - you will need Phillips #0,1 and 2. Just for example on step 18, the pulleys (part N) need Phillips #1 to screw in, but the plates (part L) need Phillips #0. I found myself switching the bit multiple times through the build. Have your tools ready. If you heed my advice, you will have no reason to fear building this. It was a breeze and I would definitely buy this again if needed. The versatility of this piece as a tv stand, nook, entry way, etc is great and I love the color and finish of this piece. Although it is not hardwood it does look fantastic for the price. The reason it was priced lower is due to the labor being on us, and if this were sold at a furniture store I see it selling for no less than 4-500 easily. I hope this helps any onlookers considering this piece but concerned about the build. You’ve got this!